I have the following code and I am really confused to, why its not reading numeric values from the code below:
Code:
Sub MG08Aug32()
Dim Rng As Range
Dim Dn As Range
Dim n As Integer
Dim Num As String
Set Rng = Range(Range("E2"), Range("E" & Rows.Count).End(xlUp))
[code]....
I desire the following output below:
97.25-97.50a
97.25
97.89-90.50a
97.89
89a
89
98a
98
Excel 2003 > I am developing a comprehensive VBA function that needs to read the value of many cells in a worksheet. I don't want to Name all those cells because then I will need to pass too many variables to the function. I can use the following set of objects and properties ...
View 6 Replies View RelatedI am using a OLAP cube, and i dragged a group dimension as Report filter,
I am using pivotitems and looping , but not able to read the filter values..
other than pagefields.cubefield.currentpage
we have around 200 groups, but we have to display only groups belonging to user. so i have macro which gets the list of just user groups..
so need to delete/update filter items so only user can see just see their groups.
1. In VBA code, i am not able to read the values , i am able to read pagefield.currentpagename but not all the other values
2.There are 200 values in the filter, based on other list -- i need to loop and delete some of these values from filter
Have a dde feed coming in from an external source. I also have a VBA written below to play sound whenever the feed goes below a certain level. When I key in values manually through the function bar the sounds play perfectly. But for some reason it is not reading the DDE feeds as value and it can go past my level without playing the sound.
Code:
Option Explicit
Private Declare Function sndPlaySound32 Lib "winmm.dll" _
Alias "sndPlaySoundA" (ByVal lpszSoundName _
As String, ByVal uFlags As Long) As Long
[Code]....
I am trying to read some values from a closed workbook. I use the following code
View 3 Replies View RelatedI'm wondering if it is possible to read values from different workbooks and not open them first.
I have an overview sheet with values from the other workbooks, and I will not use relative references but us a macro that runs trough the workbooks and collect the values.
I am trying to create a "macro" that will read values from one workbook into an array based on a key field. If the key isn't present the cells data is not to be stored. After the records are stored i want to test them agains a range in a differnt workbook. If the data compared matches a stored value, leave it alone. If there is no match, a cell needs to be added with a value stating a differnce.
Like i stated i am new at this and have no clue how to compare an data array to a field. Let alone read the values into the array.
How do I set a ComboBox list to read values from an array? I tried the following in VBA, but it didn't work....
ComboBox1.List = Array("January", "February", "March", “April”, “May”, “June”, “July”, “August”, “September”, “October”, “November”, “December”)
I've recently discovered the usefulness of VB in excel and have managed to write some basic macros that enhance many of my workbooks. BUT, I've bumped into a problem I can't seem to solve. Please help!
I'm looking to import the values in a large range of cells ( 5 x 5000) in a closed workbook into a range that i specify in an open one, where both workbooks are housed in the same directory. I also want to include logic that allows me to move the 2 files to different directories (the names will never change, only the paths) and have the code still work--I believe i'd use relative path references?
I've found lots of snippets of code on the topic but can't seem to get any of them to work. For instance: http://spreadsheetpage.com/index.php...a_closed_file/
Problem is, I'm so new that I don't even know where to begin pasting the code (objects vs. modules, etc) in the VBA editor.
In a userform I have 6 DTPlcker controls for 3 periods (from...to... X3). The dates chosen are not saved unfortunately and once I exit and retrieve the file again all the dates in the 6 DTpickers get the date of today.
View 7 Replies View RelatedIn a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.
What formula should I used to get totals
When using the replace rule in Excel, you can use "?" to represent a standard variable, e.g. if you had the text "Bottle 100g", and you set the replace rule as "?g", it would delete the "g" and the four characters before it, leaving you with "Bottle".
However, if I have lots of replace rules to make in a file, and I only want to eliminate the numerical values before a letter, how do I go about doing this?
For example, if I had the text "Dog food 10g", and I made a replace rule "??g", it would leave me with " food ". What I would really need, is a way of taking away the numeric values before the "g", which would give me "Dog food".
Therefore, is there a unique identifier for numeric and/or text values?
I need a left side padding for numeric values to keep them in 4 digits
ie 1 becomes 0001, 25 becomes 0025 and 345 becomes 0345. Following is the custom number format I tried and it fails.
[<10]"000"#;[<100]"00"#;[<1000]"0"#
I have the following issue:
=AR85*36*75*6.29
The above formula does not return any value and it simply appears as it is keyed. Cell AR85 has 5. I know it is something to with this cell, but I cannot fix it. In fact the whole Column AR has these values downloaded. I tried "text to columns" but it still doesn't work.
The Macro below will not combine numeric values Just Text. I get a Type Mismatch Error When I open It. I need for this macro to run with Numeric Values 1,2,3,etc.
View 2 Replies View RelatedI'm trying to show learner progress during our half term collections but the values we track are similar to that below
2B+
2B
2B-
2C+
2C
2C-
1A+
1A
When I attempt to make a chart in the normal format it doesn't recognise the value.
My colleague has a problem where he needs to Extract numbers from alphanumberic strings. Here is the formula he is using:
=MID(B7,MATCH(TRUE,ISNUMBER(1*MID(B7,ROW($1:$297),1)),0),COUNT(1*MID(B7,ROW($1:$297),1)))
It works if alphabetic and numbers are clustered together such as scs987
It works if alphabetic and numbers are not clustered together such as scs987dtg
Problem: It does not work when numbers are not clustered together such as scs987dtg1234
Is it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
formula to add letters but with a numeric value. this is for a schdule sheet. where w would equal 7.5 and x would be 0.
i am using this
=SUMPRODUCT(--(ISTEXT(B3:H3)))*7.5
reads the w and adds up ok but need to be able to put w for work and x for off days and still add the total hours
I have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
I'm currently trying to create a rota timesheet which automatically takes shift patterns and deducts for unpaid breaks.
Basically if a shift is less than 4.5 hours long then no break is deducted
If the shift length is 4.5 - 6.5 hours then 15 mins are deducted
If the shift is longer than 6.5 hours then 30 mins are deducted.
The problem I currently have is all numeric values only are not being recognized on my password column. I have tried changing the cell formats but still problem still there. The program work if an alphanumeric value is declared as password. However if you simply indicate plain numeric values only as password, it returns incorrect values, it like it doesn;t recognize all numeric values. Also how can I make 0000 as a declared password? when I place 0000 on my password column, only one zero value is being displayed instead of four another thing if I happen to place 0123 only 123 is being displayed.
View 4 Replies View Relatedwho can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies View RelatedI have created a calendar in Exel for individuals to put in their time at the bottom for everyday I have put in a total. Is there a formula that I can sum the dates, pick a certain time from those date and get my total hours for that particular week?
View 6 Replies View RelatedI have the following issue. I have a file, which contains about 7 000 columns, each with 8000 rows, mostly filled with numbers (with decimals). But sometimes, numbers will be replaced by "N/A" where a value was not available. What I want to do, is delete columns, where all the rows are just "N/A" to reduce the size my file.
View 2 Replies View RelatedI have cell E15 in Sheet1 which will take an 8 digit Personnel Number, which can have leading 0's. I want to prevent a user from entering any characters other than 0123456789. I have worked out that I need to use the Worksheet_Change event and I need to use the function IsNumeric.
No matter what I do I can't trigger the Worksheet_Change event!
I have cells with alphanumeric values. I need to extract the numeric values based on certain criteria and put these values in adjescent rows.
The sheet I am using has 3 rows . Row B contains data. Row C is Amount, Row D is Month, Row E is Action
To put values in Rows C, D and E , I need the data from row B in following criteria.
data in B row is as follows :-
RS 555/STMT DT 170807/BP12/TO PAY MEMBERSHIP FEE
RS.555/STMT 020907/BP12/ OFFER
ANNFEE RS 555/- / STMT 020907 / BP 12 / FIRST TIME
RS595/STMT 0807/BP12/ first time
MEM FEES RS 525 /STMT 120807 / BP12/1ST TIM
criteria for row C
if the cell contains "AMT" or "RS" or "INR" or "AMNT" or "RS."then extract the value till first "/" or "" and put it
under Amount row. ( E.g: "AMT 595 /" or "Inr 595/" or " Rs. 595")
criteria for row D
if the cell contains "stmt" or begins with "0" or endswith "07" then extract the value till first "/" or "" and put it under Month row.
criteria for row E
if the cell contains "BP" or "OP" then extarct the value till first "/" or "" and put it under department row. ( e.g " BP01 /" or "OP 02 ")
Are test have some text values RA = 0 and A= 0.5 as well as numeric values. I am currently using the formula =IF(COUNTIF(A1:A13,"A"),(COUNTIF(A1:A13,"A")*0.5)+SUM(A1:A13))/COUNTA(A1:A13) which is not very good at all, but it works for this instance. I also use the formula in B2 =IF(A1="RA",0,IF(A1="A",0.5,A1)) as a helper column but I need a stabile formula with out a helper column that will allow me to average text and numeric values. In the future, they are going to expand the text values part i.e. B = 0.3, BD = 0.2 etc....
View 9 Replies View RelatedI am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies View RelatedI have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?