Copy Values Outside Of Numeric Range
Sep 11, 2007
I have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?
View 9 Replies
ADVERTISEMENT
Apr 13, 2007
I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies
View Related
May 4, 2006
I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
View 9 Replies
View Related
Apr 16, 2008
I want to delete all the rows with values between -1 and 1 in column 'I'. I currently set up a macro to do the formatting and conditional stuff that highlights all values above 1 and below -1 - these are the values I need to conduct my analysis on, but I can't figure out how to delete the rows in between. The worksheet has approximately 5,000 rows (and growing) and this would help me clean up the data significantly.
View 7 Replies
View Related
Jan 1, 1970
how to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
View 14 Replies
View Related
Oct 3, 2011
I am finding many posting on this topic with unique numeric values and have not come across one in regards to a text value. The essence of the formula is looking through a list for unique email addresses and now I need to up it to a date range and eventually a store # range
I am using the following array formula to establish an overall count:
=SUM(IF(FREQUENCY(IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""), IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""))>0,1))
Ctrl+Shift+Enter
The date column is E:E.
The store number column is G:G
View 3 Replies
View Related
Jun 11, 2013
I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
View 3 Replies
View Related
Aug 31, 2012
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies
View Related
Feb 2, 2010
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
View 9 Replies
View Related
Mar 19, 2008
1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
View 6 Replies
View Related
Dec 20, 2007
Can anyone help me to get a validation to check that what is entered in a cell, lets say A1,
has to be number between 100000 and 899999 (this I already have) OR a value/text from I100000 to I899999. So it only acceots a vlaue betwwen 100000 and 899999 and it is also ok to have the letter I at the begining.
View 9 Replies
View Related
Aug 12, 2013
Im trying to create a code that pastes the values from a range in one workbook to the end of a table in another.
This is what i got so far but the value only part is missing.
Code:
Dim targetBook As Workbook
Dim sourceWorkbook As Workbook
Dim sourceSheet As Worksheet
[Code]....
View 3 Replies
View Related
Mar 29, 2008
I 've a table of data It begins from A4 :f last row
In "A"column dates and in the other coulmns from b:f different data
in cell "g4" Iwil write the new sheet name
In cell "h4" I write the starting date
in "i4" I write the end date
the starting date and the end date are equal to values in range (A:A)
now
i want a vba code to select the part of table which starting with the row where is the starting date-("h4" ).value- is found in range(a:a) ,and the end of the selected part of table can be difined according to the "I4" value.
after selecting this part of date i want to copy it to sheet according to G4 value
View 9 Replies
View Related
Jun 29, 2007
I HAVE A SHEET WHERE USER ENTERS DATA, AND WHEN USER ENVOKES MACRO, THE SAID
DATA IS COPIED TO A 2ND SHEET WHERE IT IS STORED. NOW PROBLEM IS THAT IT COPIES
DATA OVER PREVIOUS DATA, BECUASE THE REFRENCE IS NOT DYNAMIC. WHAT I NEED THAT THE DATA IS COPIES EVERY TIME TO THE NEXT ROW,
View 5 Replies
View Related
Sep 18, 2007
In the code below I am trying to scan a column and copy the values -.03 and lower OR 0.3 and greater. I selected a case to do nothing if the value is within the range of -0.2 To 0.2 but this configuration will still copy over -0.2 and 0.2 values along with the ones outside this range. I tried using -0.3 To 0.3 but that skipped the 0.3 values.
Is the negative throwing this off? The code works perfectly, it just brings the twos with it.
Sub TempCase()
Dim colSearch As Range
Dim celVal As Range
Dim celRow As Range
Sheets("Sheet3").Range("A1").Copy Destination:=Sheets("Sheet2").Range("A65536").End(xlUp).Offset(1, 0)
With Sheets("Sheet3")
Set colSearch = Intersect(.Range("C:C"), .UsedRange)
End With
For Each celVal In colSearch
Select Case celVal.Value
Case -0.2 To 0.2
Case Else
Set celRow = Union(celVal.Offset(0, 1), celVal.Offset(0, 2), celVal)
celRow.Copy Destination:=Sheets("Sheet2").Range("A65536").End(xlUp).Offset(1, 0)
End Select
Next celVal
End Sub
View 9 Replies
View Related
Apr 5, 2008
I can copy one range to another with:
Rng1.Copy Rng2
How can I modify this so I only paste over the values (not formulas)?
View 4 Replies
View Related
May 9, 2008
I want to press a commandbutton and fillacrosssheets but I only want to fill the values, no formatting, no formulas.
The following code works, but carries over the formulas and values.
I tried changing xlFillWithContents constant but without success.
Private Sub CommandButton1_Click()
Dim msg As Integer
Dim ws As Variant
msg = MsgBox("You are about to copy over the existing cells in columns D through P of the Bill Of Materials. Do you want to continue?", vbYesNo + vbQuestion, "Paste Cells")
If msg = 6 Then
ws = Array("Bill of Materials-2", "Admin")
Sheets(ws).FillAcrossSheets _
Worksheets("Bill of Materials-2").Range("D20:BottomLineC"), Type:=xlFillWithContents
End If
If msg = 7 Then
Exit Sub
End If
Application.CutCopyMode = False
Range("A1").Select
End Sub
View 9 Replies
View Related
Mar 5, 2014
In a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.
What formula should I used to get totals
View 5 Replies
View Related
Jan 20, 2009
When using the replace rule in Excel, you can use "?" to represent a standard variable, e.g. if you had the text "Bottle 100g", and you set the replace rule as "?g", it would delete the "g" and the four characters before it, leaving you with "Bottle".
However, if I have lots of replace rules to make in a file, and I only want to eliminate the numerical values before a letter, how do I go about doing this?
For example, if I had the text "Dog food 10g", and I made a replace rule "??g", it would leave me with " food ". What I would really need, is a way of taking away the numeric values before the "g", which would give me "Dog food".
Therefore, is there a unique identifier for numeric and/or text values?
View 10 Replies
View Related
Feb 3, 2010
I need a left side padding for numeric values to keep them in 4 digits
ie 1 becomes 0001, 25 becomes 0025 and 345 becomes 0345. Following is the custom number format I tried and it fails.
[<10]"000"#;[<100]"00"#;[<1000]"0"#
View 3 Replies
View Related
Aug 13, 2012
I have the following code and I am really confused to, why its not reading numeric values from the code below:
Code:
Sub MG08Aug32()
Dim Rng As Range
Dim Dn As Range
Dim n As Integer
Dim Num As String
Set Rng = Range(Range("E2"), Range("E" & Rows.Count).End(xlUp))
[code]....
I desire the following output below:
97.25-97.50a
97.25
97.89-90.50a
97.89
89a
89
98a
98
View 6 Replies
View Related
May 7, 2013
I have the following issue:
=AR85*36*75*6.29
The above formula does not return any value and it simply appears as it is keyed. Cell AR85 has 5. I know it is something to with this cell, but I cannot fix it. In fact the whole Column AR has these values downloaded. I tried "text to columns" but it still doesn't work.
View 9 Replies
View Related
Jun 9, 2007
The Macro below will not combine numeric values Just Text. I get a Type Mismatch Error When I open It. I need for this macro to run with Numeric Values 1,2,3,etc.
View 2 Replies
View Related
May 20, 2014
I'm trying to show learner progress during our half term collections but the values we track are similar to that below
2B+
2B
2B-
2C+
2C
2C-
1A+
1A
When I attempt to make a chart in the normal format it doesn't recognise the value.
View 1 Replies
View Related
Jan 5, 2005
My colleague has a problem where he needs to Extract numbers from alphanumberic strings. Here is the formula he is using:
=MID(B7,MATCH(TRUE,ISNUMBER(1*MID(B7,ROW($1:$297),1)),0),COUNT(1*MID(B7,ROW($1:$297),1)))
It works if alphabetic and numbers are clustered together such as scs987
It works if alphabetic and numbers are not clustered together such as scs987dtg
Problem: It does not work when numbers are not clustered together such as scs987dtg1234
View 8 Replies
View Related
Jul 4, 2014
Is it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
View 6 Replies
View Related
Oct 29, 2008
formula to add letters but with a numeric value. this is for a schdule sheet. where w would equal 7.5 and x would be 0.
i am using this
=SUMPRODUCT(--(ISTEXT(B3:H3)))*7.5
reads the w and adds up ok but need to be able to put w for work and x for off days and still add the total hours
View 5 Replies
View Related
Oct 23, 2009
I have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
View 12 Replies
View Related
Nov 12, 2009
I'm currently trying to create a rota timesheet which automatically takes shift patterns and deducts for unpaid breaks.
Basically if a shift is less than 4.5 hours long then no break is deducted
If the shift length is 4.5 - 6.5 hours then 15 mins are deducted
If the shift is longer than 6.5 hours then 30 mins are deducted.
View 4 Replies
View Related
Nov 27, 2008
The problem I currently have is all numeric values only are not being recognized on my password column. I have tried changing the cell formats but still problem still there. The program work if an alphanumeric value is declared as password. However if you simply indicate plain numeric values only as password, it returns incorrect values, it like it doesn;t recognize all numeric values. Also how can I make 0000 as a declared password? when I place 0000 on my password column, only one zero value is being displayed instead of four another thing if I happen to place 0123 only 123 is being displayed.
View 4 Replies
View Related
