Averaging Text With Numeric Values
Feb 26, 2008
Are test have some text values RA = 0 and A= 0.5 as well as numeric values. I am currently using the formula =IF(COUNTIF(A1:A13,"A"),(COUNTIF(A1:A13,"A")*0.5)+SUM(A1:A13))/COUNTA(A1:A13) which is not very good at all, but it works for this instance. I also use the formula in B2 =IF(A1="RA",0,IF(A1="A",0.5,A1)) as a helper column but I need a stabile formula with out a helper column that will allow me to average text and numeric values. In the future, they are going to expand the text values part i.e. B = 0.3, BD = 0.2 etc....
View 9 Replies
ADVERTISEMENT
Nov 13, 2007
Without using VB is there a single cell solution to this?
Column of cells contain values in this format;
100, 100, 95, 96
as text.
There can be any number of commas and values. Is there a way to find the average of the numbers in each cell? (Above example would return 97.75.)
View 9 Replies
View Related
Jun 4, 2012
I have two (2) different values in the same column one value is text (INV) the other is a time date stamp 05/18/2012 10:48:32. The text i want to return in a seperate column for these two is if it is INV then the result is "PENDING" if it is a date 05/18/2012 etc. then the result would be "PAID" example:
Payment Status
05/08/2012 10:30:12
INV
05/17/2012 08:27:37
INV
and so on...................
View 9 Replies
View Related
May 29, 2013
I'm trying to find out exactly how I can use sum product on cells that have text and numeric values. Here's my sample data (6 points):
TN FX1576 20, TN FX1577 25, AZ FX1577 30, AZ FX1577 35, FW FX 1577 40, and FW 1577 45.
I wish to do the following: I want to sum all of the right numeric values based on the first two text values(TN, AZ, or FW). I want to sum these numbers to their respective total cells at the top of the page. So far I can sum the numeric values fine using the following formula: =sumproduct((right(range,2)*1) but when I try to differentiate between the respective locations (AZ, TN, or FW) I get an error message.
Attached is an example of what I'm trying to do along with the formula I'm currently using and yellow shading to represent where I want my respective sums to go.
ExA.xls
View 1 Replies
View Related
Jul 14, 2014
I have a list of numbers with decimals : such as
742111.37
703102.4
641771.52
652689.31
741202.92
I would like to convert the Numeric values to Text
Result :
Seven Hundred Forty Two Thousand One Hundred and Eleven and Thirty Seven .....
..........
..........
and so on....
View 1 Replies
View Related
Sep 19, 2012
I have used the advanced filter option in excel 2010 to display all the unique occurences of a list of names (column B) and then used the count function =COUNTIF(A$2:A$21,B2) to count the occurences of each name (column C).
However, excel did not manage to take into account the last 3 entries in column A (mir-23). I assume this is because it is a mixture of text and numeric values. How can I include this information in the grouping and counting?
excel1.png
View 3 Replies
View Related
Feb 12, 2009
I am wondering if it is possible to format a cell that contains text - based on a number in the cell next to it. Here is what I have:
Category......Mean
Results.........3.3
Morale..........3.8
Buy-In..........4.0
I would like the word 'Results' to display in BLACK text because the mean score is in the range 3.0-3.9 (same goes for the word 'Morale'). I would like the word 'Buy-In' to disply in GREEN text because the mean score is in the range 4.0-5.0. Basically, the mean scores are calculated using formulas and I would like the color of the category to change based on the mean score number. Is there a way to use conditional formatting to do this? Or another way to automatically make this work? File is attached.
View 2 Replies
View Related
Jan 1, 1970
how to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
View 14 Replies
View Related
Nov 3, 2011
Currently I have a macro set up that sorts a range.
It sorts numbers first in ascending order and then text comes at the bottom of the sorted range.
Is there any way of reversing this so that text appears first and then numeric values in ascending order below?
View 1 Replies
View Related
Aug 28, 2009
Here's my situation.
I will post a rudimentary example:
Account Name/Column A
Truman school, San Diego
Truman school, San Diego
Truman school, San francisco
Truman school, Atlanta
Truman school, Atlanta
In column B, I would like it to assign a unique numeric id based on the TEXT only.
So Truman school, San Diego gets a string of numbers: 1234
Truman school, san fran: 1235
Truman school, Atlanta: 1236
My spreadsheet is about 6,000 records with a great deal of the above situation going on. So school names are identical with different locations assigned. I am trying to import to a database and don't want a lot of duplicate records. That's why I'm trying to assign a numeric value.
View 4 Replies
View Related
Oct 3, 2011
I am finding many posting on this topic with unique numeric values and have not come across one in regards to a text value. The essence of the formula is looking through a list for unique email addresses and now I need to up it to a date range and eventually a store # range
I am using the following array formula to establish an overall count:
=SUM(IF(FREQUENCY(IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""), IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""))>0,1))
Ctrl+Shift+Enter
The date column is E:E.
The store number column is G:G
View 3 Replies
View Related
Dec 18, 2013
I am a teacher creating a grade book in Excel. Each student is in a single row, with columns for the various assignments. For data analysis purposes, I am trying to develop formulas to make two different calculations.
The first calculation is simply the average quiz grade for all students, for all quizzes.
The second calculation is the average quiz grade for all grades that are higher than zero. This will tell me the average quiz score for quizzes that have actually been attempted.
I do need to track students that have withdrawn from the class, so column A will contain the letter "w" if the student has withdrawn from the class. If the student has withdrawn, the grades for that student should be ignored in the calculations.
Since I do accept quizzes after their due dates, a particular quiz score will have an entry of "L" if it has not yet been taken. These entries also need to be ignored in the calculations.
See the attached workbook for some sample data and the expected results.
Sample Workbook.xlsx
View 4 Replies
View Related
Aug 6, 2014
Is it possible to perform average function on subsequent group of rows and make a new set of rows ?
For example: As below, in column 1 the average of values of first 3 rows (i.e, 1, 2 & 3) is 2. similarly average of values in next 3 rows (i.e, 4,5 & 6) is 5 and so on....
Is this possible to get a new set of rows by averaging values of rows from a particular column. without applying average formula in each row of column 2. i m using MS Excel 13.
Column 1 ______ Column 2
1 _____________ 2
2 ______________ 5
3 ______________ 8
4 _____________ 11
5
6
7
8
9
10
11
12
View 4 Replies
View Related
Aug 7, 2013
I have a very large dataset (~5000 points in a 2D array) which I need to plot and fit a linear trendline to. There are 90 subjects each of which has a daily binary event checked over its lifespan. eg:
Day: 1 2 3 4 5 6 7 8 9 10
subj 1 0 1 0 0 0 (dead)
subj 2 1 1 1 0 1 0 1 0 0 0(dead)
subj 3 0 0 1 0(dead)
I simply averaged the number of events per day per subject and plotted them but near the long-lived end of the data the variability gets really high. I have normalized the lifespan for each subject such that instead of the event occurring on day 10, it occurred at 0.2 of its total lifespan (dying on day 50). Now that my data is in this format, I want to create an average for all subjects over the domain 0-1 representing birth-death.
The trouble is that now each subject's domain has different intervals between points (eg. 0.1 for subjects living 10 days and 0.006993 for those living 143 days). How to now space out the cells (somewhat) automatically so I can average the columns? My array is 90 x 150 so doing it manually is not really possible. Or, alternatively, is there a way to create a continuous average rather than a discrete one? Some sort of function that goes through each infinitely small (or even a discrete really tiny interval) point of the domain (0-1) and averages the binary y-value?
View 2 Replies
View Related
Jan 14, 2014
I've got daily water level data that spans around one hundred years. I am looking for monthly average water level data, but rather than using the whole month, I'd like to average the first two days and the last two days. I want to have a single value for each month in the 100 years of data.
If the data was smaller I could do this by hand, however having 100 years worth of data = 1200 months = so many days...
It's tough since months don't have a set number of days, and then leap years and it all gets so complicated. I've never really had a problem where date was a criteria to pull values from, and I don't know how to work with this. The internet suggest the Averageif function which I have dabbled with, but no dice.
View 1 Replies
View Related
Mar 5, 2014
In a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.
What formula should I used to get totals
View 5 Replies
View Related
Jan 20, 2009
When using the replace rule in Excel, you can use "?" to represent a standard variable, e.g. if you had the text "Bottle 100g", and you set the replace rule as "?g", it would delete the "g" and the four characters before it, leaving you with "Bottle".
However, if I have lots of replace rules to make in a file, and I only want to eliminate the numerical values before a letter, how do I go about doing this?
For example, if I had the text "Dog food 10g", and I made a replace rule "??g", it would leave me with " food ". What I would really need, is a way of taking away the numeric values before the "g", which would give me "Dog food".
Therefore, is there a unique identifier for numeric and/or text values?
View 10 Replies
View Related
Feb 3, 2010
I need a left side padding for numeric values to keep them in 4 digits
ie 1 becomes 0001, 25 becomes 0025 and 345 becomes 0345. Following is the custom number format I tried and it fails.
[<10]"000"#;[<100]"00"#;[<1000]"0"#
View 3 Replies
View Related
Aug 13, 2012
I have the following code and I am really confused to, why its not reading numeric values from the code below:
Code:
Sub MG08Aug32()
Dim Rng As Range
Dim Dn As Range
Dim n As Integer
Dim Num As String
Set Rng = Range(Range("E2"), Range("E" & Rows.Count).End(xlUp))
[code]....
I desire the following output below:
97.25-97.50a
97.25
97.89-90.50a
97.89
89a
89
98a
98
View 6 Replies
View Related
May 7, 2013
I have the following issue:
=AR85*36*75*6.29
The above formula does not return any value and it simply appears as it is keyed. Cell AR85 has 5. I know it is something to with this cell, but I cannot fix it. In fact the whole Column AR has these values downloaded. I tried "text to columns" but it still doesn't work.
View 9 Replies
View Related
Jun 9, 2007
The Macro below will not combine numeric values Just Text. I get a Type Mismatch Error When I open It. I need for this macro to run with Numeric Values 1,2,3,etc.
View 2 Replies
View Related
May 20, 2014
I'm trying to show learner progress during our half term collections but the values we track are similar to that below
2B+
2B
2B-
2C+
2C
2C-
1A+
1A
When I attempt to make a chart in the normal format it doesn't recognise the value.
View 1 Replies
View Related
Jan 5, 2005
My colleague has a problem where he needs to Extract numbers from alphanumberic strings. Here is the formula he is using:
=MID(B7,MATCH(TRUE,ISNUMBER(1*MID(B7,ROW($1:$297),1)),0),COUNT(1*MID(B7,ROW($1:$297),1)))
It works if alphabetic and numbers are clustered together such as scs987
It works if alphabetic and numbers are not clustered together such as scs987dtg
Problem: It does not work when numbers are not clustered together such as scs987dtg1234
View 8 Replies
View Related
Jul 4, 2014
Is it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
View 6 Replies
View Related
Oct 29, 2008
formula to add letters but with a numeric value. this is for a schdule sheet. where w would equal 7.5 and x would be 0.
i am using this
=SUMPRODUCT(--(ISTEXT(B3:H3)))*7.5
reads the w and adds up ok but need to be able to put w for work and x for off days and still add the total hours
View 5 Replies
View Related
Oct 23, 2009
I have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
View 12 Replies
View Related
Nov 12, 2009
I'm currently trying to create a rota timesheet which automatically takes shift patterns and deducts for unpaid breaks.
Basically if a shift is less than 4.5 hours long then no break is deducted
If the shift length is 4.5 - 6.5 hours then 15 mins are deducted
If the shift is longer than 6.5 hours then 30 mins are deducted.
View 4 Replies
View Related
Nov 27, 2008
The problem I currently have is all numeric values only are not being recognized on my password column. I have tried changing the cell formats but still problem still there. The program work if an alphanumeric value is declared as password. However if you simply indicate plain numeric values only as password, it returns incorrect values, it like it doesn;t recognize all numeric values. Also how can I make 0000 as a declared password? when I place 0000 on my password column, only one zero value is being displayed instead of four another thing if I happen to place 0123 only 123 is being displayed.
View 4 Replies
View Related
Mar 5, 2009
who can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies
View Related
Jan 1, 1970
I have created a calendar in Exel for individuals to put in their time at the bottom for everyday I have put in a total. Is there a formula that I can sum the dates, pick a certain time from those date and get my total hours for that particular week?
View 6 Replies
View Related
