Macro Does Not Run With Numeric Values
Jun 9, 2007The Macro below will not combine numeric values Just Text. I get a Type Mismatch Error When I open It. I need for this macro to run with Numeric Values 1,2,3,etc.
View 2 Replies
ADVERTISEMENT
Macro To Select Numeric Values In A Column
Jun 5, 2014In cell A1 I have a countdown timer from an external source that counts down to 00:00:00 approximately every 10 minutes and then resets.
I need a macro to be triggered whenever 00:00:00 is reached.
The macro will select column AL and copy a range of cells (within AL) that contain numeric values only and paste these numeric values in the adjacent cells in column AM. It is important that the paste is values only and not formatting or formulas.
Column is being fed dynamic data from an external source and displays either #N/A or numeric values.
How To Add Alpha Numeric Values
Mar 5, 2014In a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.
What formula should I used to get totals
How Do I Replace Numeric Values Only
Jan 20, 2009When using the replace rule in Excel, you can use "?" to represent a standard variable, e.g. if you had the text "Bottle 100g", and you set the replace rule as "?g", it would delete the "g" and the four characters before it, leaving you with "Bottle".
However, if I have lots of replace rules to make in a file, and I only want to eliminate the numerical values before a letter, how do I go about doing this?
For example, if I had the text "Dog food 10g", and I made a replace rule "??g", it would leave me with " food ". What I would really need, is a way of taking away the numeric values before the "g", which would give me "Dog food".
Therefore, is there a unique identifier for numeric and/or text values?
Padding Numeric Values With 0's
Feb 3, 2010I need a left side padding for numeric values to keep them in 4 digits
ie 1 becomes 0001, 25 becomes 0025 and 345 becomes 0345. Following is the custom number format I tried and it fails.
[<10]"000"#;[<100]"00"#;[<1000]"0"#
Read Numeric Values VBA
Aug 13, 2012I have the following code and I am really confused to, why its not reading numeric values from the code below:
Code:
Sub MG08Aug32()
Dim Rng As Range
Dim Dn As Range
Dim n As Integer
Dim Num As String
Set Rng = Range(Range("E2"), Range("E" & Rows.Count).End(xlUp))
[code]....
I desire the following output below:
97.25-97.50a
97.25
97.89-90.50a
97.89
89a
89
98a
98
Cell Values Not Numeric?
May 7, 2013I have the following issue:
=AR85*36*75*6.29
The above formula does not return any value and it simply appears as it is keyed. Cell AR85 has 5. I know it is something to with this cell, but I cannot fix it. In fact the whole Column AR has these values downloaded. I tried "text to columns" but it still doesn't work.
Creating A Chart Using Non Numeric Values
May 20, 2014I'm trying to show learner progress during our half term collections but the values we track are similar to that below
2B+
2B
2B-
2C+
2C
2C-
1A+
1A
When I attempt to make a chart in the normal format it doesn't recognise the value.
Extracting Numeric Values From String
Jan 5, 2005My colleague has a problem where he needs to Extract numbers from alphanumberic strings. Here is the formula he is using:
=MID(B7,MATCH(TRUE,ISNUMBER(1*MID(B7,ROW($1:$297),1)),0),COUNT(1*MID(B7,ROW($1:$297),1)))
It works if alphabetic and numbers are clustered together such as scs987
It works if alphabetic and numbers are not clustered together such as scs987dtg
Problem: It does not work when numbers are not clustered together such as scs987dtg1234
Convert Alphabets To Numeric Values
Jul 4, 2014Is it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
Formula To Add Letters With Numeric Values
Oct 29, 2008formula to add letters but with a numeric value. this is for a schdule sheet. where w would equal 7.5 and x would be 0.
i am using this
=SUMPRODUCT(--(ISTEXT(B3:H3)))*7.5
reads the w and adds up ok but need to be able to put w for work and x for off days and still add the total hours
Sum Numeric Values That Include Units
Oct 23, 2009I have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
Alter Numeric Values By Size
Nov 12, 2009I'm currently trying to create a rota timesheet which automatically takes shift patterns and deducts for unpaid breaks.
Basically if a shift is less than 4.5 hours long then no break is deducted
If the shift length is 4.5 - 6.5 hours then 15 mins are deducted
If the shift is longer than 6.5 hours then 30 mins are deducted.
Numeric Values Not Being Recognize On Password
Nov 27, 2008The problem I currently have is all numeric values only are not being recognized on my password column. I have tried changing the cell formats but still problem still there. The program work if an alphanumeric value is declared as password. However if you simply indicate plain numeric values only as password, it returns incorrect values, it like it doesn;t recognize all numeric values. Also how can I make 0000 as a declared password? when I place 0000 on my password column, only one zero value is being displayed instead of four another thing if I happen to place 0123 only 123 is being displayed.
View 4 Replies View RelatedInput Numeric Values Only On Textbox
Mar 5, 2009who can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies View RelatedCounting Unique Numeric Values
Jan 1, 1970I have created a calendar in Exel for individuals to put in their time at the bottom for everyday I have put in a total. Is there a formula that I can sum the dates, pick a certain time from those date and get my total hours for that particular week?
View 6 Replies View RelatedDelete Column If All Values Are Non-numeric?
May 7, 2012I have the following issue. I have a file, which contains about 7 000 columns, each with 8000 rows, mostly filled with numbers (with decimals). But sometimes, numbers will be replaced by "N/A" where a value was not available. What I want to do, is delete columns, where all the rows are just "N/A" to reduce the size my file.
View 2 Replies View RelatedRestrict Cell To Numeric Values Only?
Jun 6, 2014I have cell E15 in Sheet1 which will take an 8 digit Personnel Number, which can have leading 0's. I want to prevent a user from entering any characters other than 0123456789. I have worked out that I need to use the Worksheet_Change event and I need to use the function IsNumeric.
No matter what I do I can't trigger the Worksheet_Change event!
Extract Alpha Numeric Values
Sep 17, 2007I have cells with alphanumeric values. I need to extract the numeric values based on certain criteria and put these values in adjescent rows.
The sheet I am using has 3 rows . Row B contains data. Row C is Amount, Row D is Month, Row E is Action
To put values in Rows C, D and E , I need the data from row B in following criteria.
data in B row is as follows :-
RS 555/STMT DT 170807/BP12/TO PAY MEMBERSHIP FEE
RS.555/STMT 020907/BP12/ OFFER
ANNFEE RS 555/- / STMT 020907 / BP 12 / FIRST TIME
RS595/STMT 0807/BP12/ first time
MEM FEES RS 525 /STMT 120807 / BP12/1ST TIM
criteria for row C
if the cell contains "AMT" or "RS" or "INR" or "AMNT" or "RS."then extract the value till first "/" or "" and put it
under Amount row. ( E.g: "AMT 595 /" or "Inr 595/" or " Rs. 595")
criteria for row D
if the cell contains "stmt" or begins with "0" or endswith "07" then extract the value till first "/" or "" and put it under Month row.
criteria for row E
if the cell contains "BP" or "OP" then extarct the value till first "/" or "" and put it under department row. ( e.g " BP01 /" or "OP 02 ")
Averaging Text With Numeric Values
Feb 26, 2008Are test have some text values RA = 0 and A= 0.5 as well as numeric values. I am currently using the formula =IF(COUNTIF(A1:A13,"A"),(COUNTIF(A1:A13,"A")*0.5)+SUM(A1:A13))/COUNTA(A1:A13) which is not very good at all, but it works for this instance. I also use the formula in B2 =IF(A1="RA",0,IF(A1="A",0.5,A1)) as a helper column but I need a stabile formula with out a helper column that will allow me to average text and numeric values. In the future, they are going to expand the text values part i.e. B = 0.3, BD = 0.2 etc....
View 9 Replies View RelatedDetermine Values In A Range Are Numeric
Apr 13, 2007I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies View RelatedCopy Values Outside Of Numeric Range
Sep 11, 2007I have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?
Using Sum Product On Cells With Numeric And Text Values
May 29, 2013I'm trying to find out exactly how I can use sum product on cells that have text and numeric values. Here's my sample data (6 points):
TN FX1576 20, TN FX1577 25, AZ FX1577 30, AZ FX1577 35, FW FX 1577 40, and FW 1577 45.
I wish to do the following: I want to sum all of the right numeric values based on the first two text values(TN, AZ, or FW). I want to sum these numbers to their respective total cells at the top of the page. So far I can sum the numeric values fine using the following formula: =sumproduct((right(range,2)*1) but when I try to differentiate between the respective locations (AZ, TN, or FW) I get an error message.
Attached is an example of what I'm trying to do along with the formula I'm currently using and yellow shading to represent where I want my respective sums to go.
ExA.xls
Convert Numeric Values With Decimals To Text
Jul 14, 2014I have a list of numbers with decimals : such as
742111.37
703102.4
641771.52
652689.31
741202.92
I would like to convert the Numeric values to Text
Result :
Seven Hundred Forty Two Thousand One Hundred and Eleven and Thirty Seven .....
..........
..........
and so on....
Summing Numeric Parts Of Alphanumeric Values
Nov 10, 2009I am wondering if you can sum the numeric parts of a range of cells containing alphanumeric values. Here is an example:
values to sum: 500, a20, ab30
expected results: 500 + 20 + 30 = 550.
In this project, the number of values to sum is large and I do not wish to use long formulas to extract the numeric part of each cell within the range. I am also forbidden to use up extra cells as an intermediate working out. Can you help?
Prompt If Numeric Values Inputed Is Less Than Five Digits
Mar 5, 2009I have a userform which has a textbox for employee id. If an employee enters less than 5 digits, it should prompt the user via msg box that he needs to enter 5 digits for employee id. However my coding doesnt work...can someone help me correct it?
View 6 Replies View RelatedNumeric Values From One Sheet To Highlight Cells On Another
Feb 10, 2010I’m trying to assign building and office keys to various personnel, by appointing different classification levels to each set of keys given out. Very similar in the way an administrator would assign permission levels to individuals.
Question:
•Is there a way to pick up an array of non-sequential numbers from one sheet (values 1 -36)
•Find those values which are assigned to columns laid out as a table,
•Then highlight those found values
I’ve attached a dummy sheet to illustrate my question.
I have not attempted coding this because I wouldn’t know where to start.
Theoretically is this even possible?
Compare Alpha And Numeric Values Within A Range
May 4, 2006I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
Automatically Updating Numeric Values In Textbox
Jan 15, 2007In the userform I have several textboxes with default values. There are five text boxes that the user can modify and three whose values I want calculated based on the values of the five modified. This is how I initialized the userform :
Private Sub UserForm_Initialize()
Workbooks("Main.xls").Activate
A_BB_and_HBP.Value = Worksheets(5). Cells(2, 35).Value
A_H.Value = Worksheets(5).Cells(2, 36).Value + Worksheets(5).Cells(2, 37).Value + Worksheets(5).Cells(2, 38).Value + Worksheets(5).Cells(2, 39)
A_2b.Value = Worksheets(5).Cells(2, 37).Value
A_3b.Value = Worksheets(5).Cells(2, 38).Value
A_HR.Value = Worksheets(5).Cells(2, 39).Value
Worksheets(5).Cells(2, 41).Value = A_BB_and_HBP.Value
Worksheets(5).Cells(2, 42).Value = A_H.Value
Worksheets(5).Cells(2, 43).Value = A_2b.Value
Worksheets(5).Cells(2, 44).Value = A_3b.Value
Worksheets(5).Cells(2, 45).Value = A_HR.Value
A_AVG.Value = CStr(CSng(A_H.Value) / (130 - CSng(A_BB_and_HBP)))
End Sub
Then I have :....................
When the user changes A_H, A_AVG remains at its default value.
Automatically Change Numeric Entries To New Values
Aug 31, 2007for a column the user will enter a numeric 1 and it will return a specfic dollar amount, example enter 1 to return 4.79
View 4 Replies View Related