Reformatting Source Data
Dec 22, 2008I need to translate my Source Data into a new format as follows: ...
View 9 Replies
ADVERTISEMENT
Reformatting Data Positions
Apr 30, 2007I have a global dataset where column A represents longitude, B represents latitude, C is a spinup value which can be ignored (even deleted) and columns D to DH are runoff values for the years 1901 to 2002. The rows extend down to 6510 (including the column headers, 6509 without). I've been trying to create a reformatted table based on this data, where longitude values are listed along row 1 and latitude values are listed in column A, with the corresponding runoff values for each year correctly repositioned into the spreadsheet according to this new 'format'; there will be 102 grids created (one for each year). The longitude values are currently not ordered and will need to be sorted (low to high) into position along row 1, without causing the runoff data to become unassigned to its associated longitude and latitude coordinates.
The second part is to then perform a linear interpolation of the reformatted data for each year's table so that the data is again reformatted' from 1.5-degrees to a 5-minute spatial resolution. This involves creating tables for each runoff year as before, but this time creating new values via application of a linear interpolation between each adjacent pair of existing values (in both the x and y direction - as the data are to be imagined as being on a geographical grid with coordinates). I've currently been trying to achieve this using Fortran, but have been getting nowhere as I'm completely new to this programming language, so I thought I'd try using Excel as I'm more familiar with this, although not sufficiently so to solve this alone!
Reformatting Data In A Table Into Headers
Jan 24, 2009I have a table with three headers:
Types: close to 4,000 total cells in the column with multiple repeats
Amounts: Obvious
Names: Only 6 available names (i.e. Tom, Bill, Fred, Richard, Sam, Alex)
It looks like this:
Type Amount Name
Type 1 | $$$$ | Tom
Type 1 | $$$$ | Bill
Type 2 | $$$$ | Fred
Type 3 | $$$$ | Richard
Type 3 | $$$$ | Tom
Type 3 | $$$$ | Sam
Type 3 | $$$$ | Alex
Type 4 | $$$$ | Fred
What I want to do is create a table with the parameters using the information contained in the previous table:
Type Tom Bill Fred Richard Sam Alex
Type 1 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Type 2 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Type 3 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Type 4 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Is there any way to convert the first table to the second table? I'm using Mac OS/X
Reformatting Data Across Columns Down Rows
Sep 27, 2006I have train departure times stored in rows for each date as follows:
Mon02-Oct8.399.069.4210.0910.3611.12
Tue03-Oct8.399.069.42
Each time/date is in its own cell.
I have hundreds of entries like this and what I want to do is restructure them as follows (on a new sheet). For each date and time couple I want the date in one cell and the time in the the cell to the right. Also please note that not all days have the same amount of dept. times and this also needs to be considered.
e.g...........................
Macro For Reformatting Citrix Data
Jan 9, 2007I have a report presented in the format such as the one in the attached file.
Current Format.xls
Is there a macro that copies and pastes the data from the original report to a new worksheet with the format such as in the attached file below.
New Format.xls
The reason why i would rather not use Pivot Tables for this purpose is because the pivottable is limiting me from expanding the report to include other looked up data with the AutoFilter option.
Reformatting Data - Subtotaling Brings Numbers Down To One Line
Apr 2, 2013I have several thousands lines of data....much of the data is the same, 2-5 rows per person, but at the last two columns is different numbers/totals....I'd like to get those all into their own column so that each person has one row with all the data...I USUALLY would sit and sort by each total, shift them over to the right into their own columns, then sit and shift them all up to one line...but thats a carpal tunnel project and i know there must be an easier way....subtotalling brings the numbers down to one line once I have shifted each one over, but not the rest of the data....
Pic Attached: Excel problem pic.JPG
Pivot Table Retains Old Source Data In Addition To New Source Data
Sep 7, 2006I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
Reformatting Addresses
Apr 21, 2007I have a few hundred addresses in excel in the following format
NameAddress1Address2Address3AreaCityPin
Is it possible for me to change that into
Namee
Address1
Address2
Address3
Area
City-Pin
Reformatting Numbers
Apr 6, 2009I have some data which is exported into excel by a package I can't amend. The information comes into excel in the format
00:00:04 (representing hh:mm:ss) but if I look at the formatting of the cell it says the formatting is general. I want to be able to cut and paste this into another spreadsheet and then apply conditional formatting to colour the text if the value is above 00:00:09, but try as I might, I can't! When I cut and paste (even using paste special) it still retains its previous format, and I still can't amend it
Any suggestions?
Date Reformatting
Apr 16, 2008I have several non-consistent/non-sequential columns with supposed dates formatted as:
09.04.08 (day/month/year). I'd like a macro where a popup window will allow me to type in columns to execute on (ie. a,g,m,t) & then it will go through & change the dates to REAL date format 04/09/2008 (month/day/year).
If this easy enuf that any of you gurus could write a few lines?
Reformatting Matrix Into Single Column?
May 27, 2014I have a matrix that looks like this:
1
2
3
4
5
6
7
8
9
10
11
12
And would like to rearrange this data to:
1
2
3
4
5
6
7
8
9
10
11
12
In actuality it's a 110000 x 3 matrix that should become a 330000 x 1 column.
Checking For Blank Cell When Reformatting
Sep 29, 2006I want to reformat some data, arranged as follows, and ignore blank cells
Date1 Time1 blank Time2
Date2 blank Time3
to
Date1 Time2
Date1 Time2
Date2 Time3
Code being used, currently writes out lines where a Date exists, but Time cell is blank, what do I need to modify in the code below, to ensure blank times are not written out
Sub test()
counter = 2
For i = 1 To Range("A65536").End(xlUp).Row
For j = 2 To Cells(i, 256).End(xlToLeft).Column
Sheets("Sheet2").Cells(counter, 1).Value = Cells(i, 1).Value
Sheets("Sheet2").Cells(counter, 2).Value = Cells(i, j).Value
counter = counter + 1
Next j
Next i
End Sub
Automating Reformatting Text Cells Or Copying Via A Search In A Different Sheet?
Jul 29, 2014I have a list of about 600 addresses that need to be reformatted with a space following X character and need to be in all caps. This would be the more tedious way because I would still need to search the other file to make sure the text itself is correct. I saw on a different forum that this line would work in adding a space
(=REPLACE(A1,5,1,MID(A1,5,1)&" ")) but I need to add two spaces and adjust the location of the space so that it is following the first string of text.
The other approach could be to set up a formula or macro that searches the other file with a section of the original text and replaces that string.
Reformatting Date Into Number. Reformat Cell Not Working. Function Maybe?
Mar 17, 2009I am rewriting functions for my companies inventory spreadsheets. Excel for some reason took the item codes and formatted them into date format. Right now it is in 10/01/1902 format, and it needs to be in 10-1902 format. I've tried reformatting the cells but so far I haven't found one that works.
View 5 Replies View RelatedExcel 2007 :: Copying Data And Graphs De-linking Source Data?
Dec 27, 2012I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
Excel 2007 / Windows 7.
Color Chart Data Points By Cell Values Of Non-Source Data
Apr 14, 2008I have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
View 3 Replies View RelatedValidation Source: Change The List Source
Apr 1, 2009Not sure if this can be done, still a rookie at this stuff. Everything works but can something be wrote into code too change list source?
View 5 Replies View RelatedUse Data Validation That Will Pull Data From A Source List
Jan 12, 2010Is there a way to use Data Validation that will pull data from a source list and also be able to type in additional data or just new data in same cell?
View 3 Replies View RelatedAdd Data Monthly And Then Have To Manually Update The "source Data" To Reflect The Added Data On Chart
Apr 28, 2009I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedLost Source Data Can Data Be Retrieved
Jan 25, 2009I can still do a pivot report against the 'saved' data. So it must be out there in a file...? I read the function GETPIVOTDATA. Based on the description, It sounds like it would work to rebuild the source data. However the examples given don't see to match up with that. I have tried playing with the command, but I really don't know what I am doing and have had no luck
Does anyone know of a way to retrieve that stored data that the pivot reports are reporting against?
Source Data For Pivot
Nov 7, 2011option 1
sourcedatastring = '\myunc\_WT_.xls'!$A$1:$CI$65536
option 2
sourcedatastring = 'L:\_WT_.xls'!$A$1:$CI$65536
using VBA i do this:-
pvtTable.SourceData = sourcedatastring
only option 2 works.. when i put a UNC drive as a sourcedata the pivot does not like it.. why? is there anyway i can solve that?
I need to put a UNC location as source data in pivottable in VBA but how?
Getting Data From External Csv Source
Jul 18, 2008I used to get data from external excel, access files and today tried to put together query to get data from CSV file. While using same source file, I have creted several queries to get data out based on criteria. For some strange reason, same structure queries that did run with excel or access as data source, does not want to work the same way with CSV files.
Here is example of non working query SQL:
SELECT Vendors.Vendor, Vendors.Name, Vendors.`Name 2`
FROM `Q:FinanceRapporterPSAPRaw`Vendors.csv Vendors
WHERE (Vendors.Name Like '%' & ? & '%')
If I enter "London" as a criteria input, it will not work. However, if I enter "ondon" it will find me all values records whre name contains London... Seems like I need to skip first symbol when entering criteria. This is, of course, not something I would like to do.
Data Source For Combobox
Jan 2, 2009I have a combobox in which I need data loaded from a column of an excel sheet.
As of now, I am using the below
Last = Sheet9.Cells(Rows.Count, 1).End(xlUp).Row
With ComboBox1
For Row = 2 To Last
.AddItem Sheet9.Cells(Row, 1)
Next Row
End With
Is there any other way to load data?
List Box Data Source
May 15, 2009I have tried putting in the Row Source in the Properties of ListBox1, (A10:A13) but the range is in another worksheet called Codes. So when I run the Form the list box shows the range A10:A13 in the current sheet. I have named the data list SP but when I punch that in it will not accept it in the Row Source. How can I lock in the source data in the list box so it only shows the named range SP.
View 9 Replies View RelatedAnother Sheet As A Data Source
Jun 15, 2009I want to design a spreadsheet report, but instead of importing the data from an external source, i would like the data to come from another sheet within the same workbook. The goal is that the data sheet will contain only raw data with no formatting, and the report sheet will contain all the formatting.
Charts: Use Different Source Data
Feb 6, 2007If there a way to change the souce data so that it changes based on a variable? For example, if a cell's value equals X then use one range and if it is Y then use a different. As far as I can tell you cannot use the "IF" argument in a chart Source field.
One option I came up with is to change the actual data on a worksheet and always have the source data point to that range in the worksheet. The problem is that the source data is not always the same length (Monthly may be 100 columns long while Daily is 1000 columns long - the chart looks starnge).
for example: ...
Update Data By Ado - Change/delete Data And Then Run Macro For Update Data In Source Spreadsheet
Dec 6, 2006I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
Too Much IF In Data Validation List Source
Apr 8, 2014I try to find a solution (with or without macro) to assign different ranges named "Failure_C..." in a data validation source depending on the value of another data validation list (32 values called)
I started in the Data Validation List Source to fill in IF function but 32 inputs are not accepted and too much caracters in the source.
The formula is starting like that:
=IF(A57=$M$78,Failure_C01,IF(A57=$M$79,Failure_C02,IF(A57=$M$80,Failure_C03,
IF(A57=$M$81,Failure_C04,IF(A57=$M$82,Failure_C05,
IF(A57=$M$83,Failure_C06,IF(A57=$M$84,Failure_C07............
Pivot Table Source Data
Aug 24, 2009I was wondering if anyone knows how to change the souce data for a Pivot Table?
Eg if I have the Pivot table looking at Columns A & B lines 1 - 20 and I want the Pivot to also include Column C and lines 21 - 50, how would I do this? for a chart I can just right click and select the "Source Data" option but it seems that this is not available for Pivot Tables.
Set Source Data For Chart Using R1C1
Mar 9, 2014Everything else in my macro is using R1C1 format for ease of automation. However, I cannot get this to resolve. I am setting the source data for a line chart.
However, if I use A1 format it works just fine.
I am using R1C1 for automation purposes. A1 format will not easily work. I have the interpolated statement in there because the range contains some empty cells. I want excel to fill the line in the chart using interpolation. All the data in the columns(N through R or 14 through 18 in R1C1 format) is contiguous. I have not tried Union, but it seems I should just use this range like I do in the A1 format.