I have several non-consistent/non-sequential columns with supposed dates formatted as:
09.04.08 (day/month/year). I'd like a macro where a popup window will allow me to type in columns to execute on (ie. a,g,m,t) & then it will go through & change the dates to REAL date format 04/09/2008 (month/day/year).
If this easy enuf that any of you gurus could write a few lines?
I am rewriting functions for my companies inventory spreadsheets. Excel for some reason took the item codes and formatted them into date format. Right now it is in 10/01/1902 format, and it needs to be in 10-1902 format. I've tried reformatting the cells but so far I haven't found one that works.
View 5 Replies View RelatedI have a few hundred addresses in excel in the following format
NameAddress1Address2Address3AreaCityPin
Is it possible for me to change that into
Namee
Address1
Address2
Address3
Area
City-Pin
I have some data which is exported into excel by a package I can't amend. The information comes into excel in the format
00:00:04 (representing hh:mm:ss) but if I look at the formatting of the cell it says the formatting is general. I want to be able to cut and paste this into another spreadsheet and then apply conditional formatting to colour the text if the value is above 00:00:09, but try as I might, I can't! When I cut and paste (even using paste special) it still retains its previous format, and I still can't amend it
Any suggestions?
I need to translate my Source Data into a new format as follows: ...
View 9 Replies View RelatedI have a global dataset where column A represents longitude, B represents latitude, C is a spinup value which can be ignored (even deleted) and columns D to DH are runoff values for the years 1901 to 2002. The rows extend down to 6510 (including the column headers, 6509 without). I've been trying to create a reformatted table based on this data, where longitude values are listed along row 1 and latitude values are listed in column A, with the corresponding runoff values for each year correctly repositioned into the spreadsheet according to this new 'format'; there will be 102 grids created (one for each year). The longitude values are currently not ordered and will need to be sorted (low to high) into position along row 1, without causing the runoff data to become unassigned to its associated longitude and latitude coordinates.
The second part is to then perform a linear interpolation of the reformatted data for each year's table so that the data is again reformatted' from 1.5-degrees to a 5-minute spatial resolution. This involves creating tables for each runoff year as before, but this time creating new values via application of a linear interpolation between each adjacent pair of existing values (in both the x and y direction - as the data are to be imagined as being on a geographical grid with coordinates). I've currently been trying to achieve this using Fortran, but have been getting nowhere as I'm completely new to this programming language, so I thought I'd try using Excel as I'm more familiar with this, although not sufficiently so to solve this alone!
I have a matrix that looks like this:
1
2
3
4
5
6
7
8
9
10
11
12
And would like to rearrange this data to:
1
2
3
4
5
6
7
8
9
10
11
12
In actuality it's a 110000 x 3 matrix that should become a 330000 x 1 column.
I have a table with three headers:
Types: close to 4,000 total cells in the column with multiple repeats
Amounts: Obvious
Names: Only 6 available names (i.e. Tom, Bill, Fred, Richard, Sam, Alex)
It looks like this:
Type Amount Name
Type 1 | $$$$ | Tom
Type 1 | $$$$ | Bill
Type 2 | $$$$ | Fred
Type 3 | $$$$ | Richard
Type 3 | $$$$ | Tom
Type 3 | $$$$ | Sam
Type 3 | $$$$ | Alex
Type 4 | $$$$ | Fred
What I want to do is create a table with the parameters using the information contained in the previous table:
Type Tom Bill Fred Richard Sam Alex
Type 1 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Type 2 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Type 3 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Type 4 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Is there any way to convert the first table to the second table? I'm using Mac OS/X
I have train departure times stored in rows for each date as follows:
Mon02-Oct8.399.069.4210.0910.3611.12
Tue03-Oct8.399.069.42
Each time/date is in its own cell.
I have hundreds of entries like this and what I want to do is restructure them as follows (on a new sheet). For each date and time couple I want the date in one cell and the time in the the cell to the right. Also please note that not all days have the same amount of dept. times and this also needs to be considered.
e.g...........................
I want to reformat some data, arranged as follows, and ignore blank cells
Date1 Time1 blank Time2
Date2 blank Time3
to
Date1 Time2
Date1 Time2
Date2 Time3
Code being used, currently writes out lines where a Date exists, but Time cell is blank, what do I need to modify in the code below, to ensure blank times are not written out
Sub test()
counter = 2
For i = 1 To Range("A65536").End(xlUp).Row
For j = 2 To Cells(i, 256).End(xlToLeft).Column
Sheets("Sheet2").Cells(counter, 1).Value = Cells(i, 1).Value
Sheets("Sheet2").Cells(counter, 2).Value = Cells(i, j).Value
counter = counter + 1
Next j
Next i
End Sub
I have a report presented in the format such as the one in the attached file.
Current Format.xls
Is there a macro that copies and pastes the data from the original report to a new worksheet with the format such as in the attached file below.
New Format.xls
The reason why i would rather not use Pivot Tables for this purpose is because the pivottable is limiting me from expanding the report to include other looked up data with the AutoFilter option.
I have several thousands lines of data....much of the data is the same, 2-5 rows per person, but at the last two columns is different numbers/totals....I'd like to get those all into their own column so that each person has one row with all the data...I USUALLY would sit and sort by each total, shift them over to the right into their own columns, then sit and shift them all up to one line...but thats a carpal tunnel project and i know there must be an easier way....subtotalling brings the numbers down to one line once I have shifted each one over, but not the rest of the data....
Pic Attached: Excel problem pic.JPG
I have a list of about 600 addresses that need to be reformatted with a space following X character and need to be in all caps. This would be the more tedious way because I would still need to search the other file to make sure the text itself is correct. I saw on a different forum that this line would work in adding a space
(=REPLACE(A1,5,1,MID(A1,5,1)&" ")) but I need to add two spaces and adjust the location of the space so that it is following the first string of text.
The other approach could be to set up a formula or macro that searches the other file with a section of the original text and replaces that string.
First and foremost I would like to congragulate you on this wondeful piece of code in the below link...
The query was to get a future date excluding Fridays and Holidays...
http://www.excelforum.com/excel-work...rkingdays.html
I have a similar query and therefore I pasted this link...
I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any..
Now Holidays would be official Public Holidays and
Leaves would be taken by the employee..
The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
i would like to use the formula "now()" to establish a date in a document. is it possible to lock this date to the initial date? (so when the document is created the date won't change the next day)
View 2 Replies View RelatedI need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedI need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
I have to excel files
1. Temperature & Humidity Reading
2. Summary
I tried to copy a date from Temperature & Humidity Reading file using the formula ='[Temperature & Humidity Reading.xlsx]Sensor 7'!$C$2 to Summary file
if the date format is like this 6/10/2013 12:00:00 AM the result is fine, but when i try to copy that formula for the succeeding dates the results is same from what i copied.
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm‎
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change()
TextBox1.Value = DTPicker1.Value
End Sub
The initialize userform code uses the following to format and set the textbox
Code:
TextBox1.Value = Format(Date, "dd-mmm-yy")
TextBox1.Value = ""
Windows 7 with Excel 2010
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1
Restricted 5
etc
Example of data
ie.
a1 b1 c1
Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I am trying to create a calculator which will show start date and end date based on the specific date provided.
EX: column A has January 1, 2013, column B has Wednesday, Column C should have a start date which supposed to be 4 days ago (December 28).
I needs a formula (not VBA) to calculate the required start date.
I have to do a job of 14 working hours and this job must be finished on 05-may-2014 13:00
My working week is from monday u/i friday and every day I work from 08:00-16:00
At what time do I have to start the job to get it done in time.
The formula should give this result: 01-may-2014 15:00
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
Example Workbook.xlsx‎
