Is there a way to refresh a sheet every minute? So not on selection change but automatically every minute
I know this code will refresh but i dont know how to do this every minute (Not a selection change as then this could refresh every second which will not be efficient)
Sheets("Notes").Calculate
create a Macro that runs when system clock changes minute and then at every change of minute of system clock.
For example, if I give the execute command to start the macro at 09:14:45 (HH:MM:SS), then its first run should be only at 09:15:00, then next run at 09:16:00 so on...
I already have a Macro that runs every minute from initial run time, using
Code:
Application.OnTime Now + TimeValue("00:01:00"), "MyMacro"
but it seems to be unreliable, because in case I open another sheet that takes lets say 20 seconds to open, the next macro run is delayed by 20 seconds.
Entering a formula which will allow me to expand my data set by interpolating between sets of x,y values. My data set is in 5-minute resolution and I would like to interpolate so that I can output a new set of x,y values in 1-minute resolution. Here is my example of what I have and what I would like my end result to be, and also I have attached a sample of my data set in the below excel file:
Original data set
Date TimeTemperature oC
6/12/13 13:30 18.28
6/12/13 13:35 17.9
6/12/13 13:40 17.9
Desired data set
Date TimeTemperature oC
6/12/13 13:30 y
6/12/13 13:31 y
6/12/13 13:32 y
6/12/13 13:33 y
6/12/13 13:34 y
6/12/13 13:35 y
6/12/13 13:36 y
6/12/13 13:37 y
6/12/13 13:38 y
6/12/13 13:39 y
6/12/13 13:40y
datetime_temp.xlsx
I have 2 sheets.
Sheet2: it contains data that is being imported from an external link with the following info: ....
I am trying to build a sales sheet that will keep all the records during the month but every day it refreshes to a blank sheet, then allowing users to flick back to a previous day and all the data from then is still saved?
I think this is possible in excel as I am sure I have seen a working sheet before but I don't know where to start or even what the process would be called in excel?
The code below enables entire workbook protect/unprotect, however ultimately it refreshes a particular sheet (sheet 8 in this instance) when the relevant data table is edited.
I have 7 sheets (one is the data table and the other 6 house pivots that work off this data table). What I want to happen is for the code to enable the unprotect, refresh and protect of all the sheets exactly like it does for the current sheet 8 (I am simply new to this an am unsure of how to write the code to make the refresh happen for all sheets).
[Code] .....
I have inserted the following code in the 'ThisWorkbook' section to allow for to sheet protection macro to work:
[Code] ......
Along with the following code in the sheet 8 section to enable the refresh macro to work:
[Code] .....
I have a userform that collects data from a worksheet, if I press back on the userform to take me back to the sheet and then change the data, when I fire up the userform it doesn't update with the new data?
I've put DoActions in UserForm_Initialize tried userform1.repaint and nothing works..
To get from sheet to userform there is a button that valdates the data before showing userform1 so it should always run the UserForm_Initialize at a guess?
I want to make it possible to refresh a particular sheet on clicking a button. i can create the button and even assign the macro. but the code for macro, to refresh i don't know how to generate the code.
View 6 Replies View RelatedCurrently i have a button on sheet 1, that contains this VBA code
Code:
ActiveWorkbook.RefreshAll
Sheets 2 , 3 ,5 all have a MS Queries.
However I only need sheets 2 and 3 refreshed , and not 5.
At the moment it takes long to refresh all , and want to specify which sheets need to be refreshed, to make it faster for the user.
FYG, I cannot remove sheet 5, as it is required on adhoc basis.
I am trying to avoid selecting sheets in my current project. I have a querytable in A1. I can get it to work if i selects sheet and range.
Can it be done using with as below
Code:
With Worksheets("meeting to look at")
End With
I have a workseet that is basically a massive list of orders that have been placed. I have some conditional formatting based on cells that use the today() function to work out how long (in days) since the order was placed.
Trouble is, the spreadsheet is always open, and is never closed down... so it does not refresh automatically. So orders that should go red to indicate a week since they've been placed, don't!
I don't want to rely on people refreshing the screen. Ideally, I would like it to refresh once a day at 1 minute past midnight, or even every hour...
I have a query with ODBC connection to a SQL database. This query's parameter is linked to a cell. The resultant data is the source for a pivot table. I want to refresh the pivot table, when the query is run. I've tried using the cell that triggers the query....but the problem is that the query takes about 10 seconds to run. By the time the query returns new data....the pivot has already refreshed. I need it to refresh AFTER the query is complete.
I tried adding a cell that sums up the data from the query...thinking when THAT changes (due to updated data), to trigger the pivot refresh. Problem is that I don't know the trigger for when the sum cell changes (ie....formula change, not typed in.)
I have a summary sheet that pulls data from several worksheets. I have a filter on column I that hides all rows that have zero values in that column. Once I protect the sheet I cannot get the filter to update as the source data changes. I have tried other macros from forums but I cannot get them to work. I would like the filter to update every time that the workbook is calculated.
View 2 Replies View RelatedI am running a macro to create a combined master summary sheet from data in several other sheets contained in one workbook. That is working fine. I need to create some kind of refresh macro so that when data in these sheets change the master sheet will change and update automatically.
View 9 Replies View RelatedI found one of your old VBA entries that allowed me to automatically refresh an autofilter function, and it works great.... with protection off.
As soon as I protect the sheet so users can't enter data into the pages showing the autofiltered data, the autofilter kicks off.
i have set the protection to allow autofiltering, so it's something that is preventing the macro (for automatically updating/refreshing the autofilter).
I'd love to either fix the macro to "autorefresh autofilter" with protection on, or just enter another code that will disable all functionality on the worksheet. (workbook is set up with multiple sheets, first sheet is for all data entry, subsequent sheets are filtered data-trying to make them viewable only).
In sheet1 (SA Awards) I have the source table for my pivot table in Range ("A1:G50"). In sheet2 (Team Listing) my pivot table is located in Range("K2:S13")
When I make changes in sheet1 I need my pivot table to update, I recorded a macro to refresh, however have only got it to work via a button & only if Sheet2 is unlocked
Sub PivotTableUpdate()
Sheets("Team Listing").Select
ActiveSheet.PivotTables("PivotTable8").PivotCache.Refresh
Sheets("SA Awards").Select
Range("B2").Select
End Sub
1. How can I get this to work in the Worksheet_Change Event?
2. How can I password protect Sheet2 & still have it work?
i have an excel spreadsheet with 27 or so workeets. it contains sales figures in it.
I want to be able to link mutiple cells of this workbook to another workbook so that it retreives that data, So that when I hit the refresh (!) button it will automatically put the data in. I will recieve new sales figures (new files) on a monthly basis so i want it to be able to update the figures to the new figures.
I am using Task scheduler to open a workbook which has some connections to an ODBC that are set to refresh on opening.
I need to automate:-
One of the sheets needs to recalculate for the sort by ascending code to run on the sheet.
Save and then close after say 2 minutes of opening (to give the ODBC connections enough time to finish).
I have a protected worksheet containing an SQL query. I have two cells on the worksheet unlocked so that users can enter fresh parameters to feed the query.
Because I have to use MS Query to interrogate our SQL server (current IT decree), the query won't support parameters directly when the query cannot be represented graphically - so I have to manually edit the sql command text and then refresh the query - or at least that was why I wrote the code below
The problem: My macro won't unprotect the sheet before it calls the SQL.it therefore won't update the sheet to detail the DSN, command text and number of parameters (latter should be 0) - info just used to verify queryit won't run the query / return the data as the sheet is still protected Comment: I have had to remove sheet protection in order to allow the sql to execute and return data. If protection is removed, the query does execute and return data ( changes in the "parameter" cell contents do cause the query to be correctly modified)
I could comment out the debug info but the query still doesn't return data if the sheet is protected.
Activesheet And worksheets(ndx) where ndx has been defined As ActiveSheet.Name
I apologise If my post Is difficult To follow - especially the code.
Sub AgedStockParameters()
nmb = ActiveWorkbook.Name
ndx = ActiveSheet.Name
Workbooks(nmb).Activate
Worksheets(ndx).Activate
ActiveSheet.Range("A1").Select
WkshtQryCon = Workbooks(nmb).Worksheets(ndx).QueryTables(1).Connection
ActiveCell.Value = WkshtQryCon
Range("A2").Select
WkshtQryFld = Workbooks(nmb).Worksheets(ndx).QueryTables(1).CommandText
ActiveCell.Value = WkshtQryFld.......................
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
I've got a spreadsheet with a few queries to extract data into my sheet. Whenever I open the spreadsheet, I get a "query refresh" dialog box, asking if I want to "Enable automatic refresh". I keep clicking on the "Enable" button but I have to keep answering the question for each open. Isn't there a way to set "yean - ok - refresh the data" so that I don't have to keep saying "yes"?
View 2 Replies View RelatedIs there a formula that will calculate standard 60 minute time in to 100 dinute time? Example 2:21 = 2:35. I know how to get to the answer with a calculator, but would like a formula to cut out all of the extra steps.
View 3 Replies View RelatedI'm trying to use some call data for some predictive staffing. I need to see the highest number of calls happening around the same time each day. I'll have to do this for a number of different lines, so working out a formula that could apply.
I have two columns, date and time stamps of the calls. A small sample is below.
7/1/13 5:50 AM
7/1/13 9:49 AM
7/1/13 10:33 AM
7/1/13 10:53 AM
7/1/13 11:19 AM
7/1/13 11:41 AM
7/1/13 12:07 PM
7/1/13 3:58 PM
7/1/13 4:03 PM
7/1/13 5:35 PM
7/1/13 6:27 PM
7/1/13 6:39 PM
7/1/13 7:37 PM
What is the formula for taking two times, and finding the minutes between them. E.g. 12:35 PM-12:28 PM=7. I know i can use (A1-A2)*1440, but is there an easier way?
View 4 Replies View RelatedI currently have a macro that runs every 10 seconds. This macro calls 5 sub-routines.
Code:
Public Sub Copy_Data()
*****code****
*****code****
*****code****
*****code****
Call SortData
Call Create_OutOfStock_File
Call Create_NearEmpty_File
Call Create_InStock_File
Call Create_Other_File
Application.OnTime Now + TimeValue("00:00:10"), "Copy_Data"
End Sub
I need to keep the current code to run Copy_Data every 10 seconds, however, i would like:
Code:
Call Create_OutOfStock_File
Call Create_NearEmpty_File
Call Create_InStock_File
Call Create_Other_File
To be called/run every odd minute, for example, 00:01:00, 00:03:00, 00:05:00
i am using excel 2007 on windows xp. here is what i have, i have 5 scanners that i want to track to see how much they scan per minute in a day, week, and month period. here are my data in excel for one scanner in a 8 hour shift:
500047022059574
A1 = the image they scan for a day
B1 = hours they worked that day (cell formatted to [m])
C1 = A1/B1
it should come out to 10.63 but it doesnt.
I have a macro called MyMacro which I would like to run every minute starting from 08:00:00 and finish at 14:00:00.
View 9 Replies View RelatedI have a table in format below, I want show a third column with sum of w.r.t the minute, so for time 2:10 ,
i want to show 10 which is sum of first four values.
Started DB request
2:10:00 2
2:10:11 3
2:10:11 4
2:10:13 1
2:11:10 3
2:11:11 2
2:11:12 1
2:12:10 1
2:12:12 2
2:12:12 2
2:12:13 1
2:13:11 1
2:13:12 1
In cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
View 5 Replies View RelatedI have been given the task of finding out who logs in at what time of the day.
I have attached the raw data that I have to work with.
In essence I need to see how many login's there were for 06.00 - 10.00 at 15 minute intervals e.g:
06:00 - 5 Logins
06:15 - 1 Logins
06:30 - 3 Logins
06:45 - 11 Logins
etc
Has anyone got any suggestions?