I have a spreadsheet with multiple colored rows (grey rows are company headers, white rows are orders). I would like to find and delete any multiple company headers (i.e. grey rows followed by another grey row) and keep only the company headers that have orders (i.e. grey rows follwed by white rows). I have attempted the following macro but it doesn't seem to be validating the initial "If" since I keep receiving my "no good" ...
View 3 RepliesI have 6 columns on my data sheet. F column is Amount column.
If there are rows where all the columns A,B,C,D and E duplicate then I need that row to be deleted, BUT before that the value from the column F should be summed to the duplicating row's F column.
I attached a simple example file, where you can see my point better. (I need the code to work with thousands of rows, and not only with 5 rows which i put on the axample)
I have over 2000 rows with 20 columns and i need to find and remove identical rows. I can do a match with MATCH() by concatenating the columns and comparing them as a whole but i need to apply this to the whole table and i need it to remove all the duplicate rows it finds.
View 5 Replies View Relatedi found a link to my problem in the subject title below,
http://www.ozgrid.com/forum/showthre...t=45580&page=2
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
After red filling certain cells based on some conditional formatting, I apply a filter to hide them. Now I need to delete them using a macro script.
View 9 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
how I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View RelatedI need to create a formula that will remove / delete the last zero from a cell, but only if there is a . in the string and then delete the .
Example
A1
175FP2T12123050079301001 - Leave unchanged
A2
175FP2T12123050079302001.1 - result should be 175FP2T12123050079302011
I have a worksheet that when a row changes based on the value of column B, I want to remove all of the formulas found in the row but keep the existing values, and then change the color of the row.
In the sample file attached, when the value is "Closed", that row will keep the existing values and then it gets grayed out. Rows that are still marked "Open" need to retain the formulas in case other information changes.
I have tried copy/paste special using autofiltering but that doesn't work because of the hidden lines. This file changes on a daily basis and I need a quick way to update the file.
SampleFile.xlsx
I have scroll a column and clear (not delete) the content of those cells that they are repeated. not delete the row
I tried with this code but doesn't work, why?
[Code] ......
I am using the following code to grab installed software on a remote computer through a macro in Excel 2007. I don't have the entire code I'm using as the majority of it works, this section here though is where I'm having problems.
View 4 Replies View RelatedI have a 'document' which shows 294 pages, I have only 10 actual pages. How
can I delete or remove the unwanted pages?
My first VBA project continues, and what I thought would be a short-term diversion is becoming a career.
I have a couple of places where a worksheet needs to be built from scratch. I thought I was being a good programmer by deleting the sheet and creating a fresh new one each time (Worksheet.Delete and Worksheets.Add). Not.
I just happened to run across a post that referred to "residue" that's left in the workbook when you delete a worksheet. Thanks, mikerickson. I noticed the workbook size increasing, and it seemed to be increasing too much for the code and controls that I was adding as I developed this thing, but then that's Microsoft for ya.
My workbook is now at 400KB and I don't even have much data in it yet. If it exceeds 500KB, I have to upgrade a free Web hosting account to a paid account (max file size is 500KB for the free account).
Therefore, in addition to wanting to be a good programmer, and wanting to save disk space, bandwidth, and download time, I also have a financial interest in removing all that "residue". Emptying my recycle bin, you might say, except that I can't recycle this particular trash. That's now #1 on my to-do list.
I have used the following VBA quotes for my workbook to remove auotfills and data that I want to remove from my worksheet. The workbook has multiple worksheets and the worksheet that I want to use this VBA on is on worksheet 10 (ie. Sheet10). what's wrong with the VBA codes that I have below? Currently nothing happens whenever I try to click on the button that's linked to this code and there's no error message.
Sub ClearStuff()
Dim rng As Range
For Each rng In Sheets(10).Range("C18:BV" & Sheets(10).Range("B65533").End(xlUp).Row)
If rng.Value = Sheets(10).Range("D11").Value Then
rng.ClearContents
rng.Interior.ColorIndex = xlNone
End If
Next rng
End Sub
is it possible to delete/remove all non use cells
for example if i only want the cells A1 THROUGH TO O31
all the rest removed??
I have a list box that shows a range of cells (called emailrange). I want to add a Delete button that enables a selected value in the Listbox to be deleted if necessary (just the cell value not the row).
The code I have thus far is below: ...
When right clicking on the sheet tab, I need to know if it is possible to remove the "Delete" from being an option. My workbook is structured to where if a single sheet is deleted, it screws up all my formulas. I tried to just password protect the workbook, but doing that removes the "Rename" function, which I still need.
View 9 Replies View RelatedI want to delete a picture from an image control in a worksheet when pressing a button. So my code is:
Private Sub CommandButton1_Click()
Sheets("Sheet1").Image1.Picture = LoadPicture("")
End Sub
Well, the problem is that this code only works when I create it. If I save and close the excel file when I open it again and I press the CommandButton1 I get the following error: Run-time error '-2147417848(80010108)' Method "Picture of object "IImage" failed.
I need to delete ALL black text cells, and only keep colored ones.
[url]
ignore the circles, because I now want to delete ALL black text fields.
In addition, I need the cells shifted up. So it should do the same thing as Right Click --> Delete --> Shift Cells Up --> OK.
Is there any way I can do that with a command or macro? And if so, can you PLEASE tell me how to do that real quick?
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
I'm okay with Excel, but I'm just getting into utilizing VBA and I've been searching high and low for a simple VBA code that will remove/delete rows based off a single criteria without loop as there are over 40,000 rows. I tried a couple that I found onilne, and adapting them to my criteria range, but no luck. (All the ones that I found that work use loop and it takes about 15 mins to run through the entire spreadsheet)
I would like to maintain my first row as it's my headers. My single criteria is to remove all rows that have "NO" in column D.
I have a Macro which deletes a sheet called "Pre selection" with:
Sheets("Pre selection").Select
ActiveWindow.SelectedSheets.Delete
It asks me every time if I am sure and I have to click to continue. Is there any way to remove this prompt or set it to continue without my intervention?
I'm attempt to automatically validate QTP spreadsheets with an EXCEL VBA macro. All is going well but I now want to look smarter. Is there a method to globally remove all comments from a worksheet?: D What I actually want to do is add comments to cells which fail validation but some of these cells may already contain comments. If they do contain comments then I want to overwrite with my comments. I thought the easiest way would be to delete all comments at the start of macro but I am all ears to any other approach.
View 4 Replies View Relatedi have problem to delete row based on red color font (without bold), for example :
input :
title1 george
title3 mike
title4 zidan
output :
title4 zidan
I am trying to write some code and I am lost.
Column Y-has Y, N entered in cells
Column R-has 1,2, etc... entered in cells (some cells have color index 26)
Column O-has 1, 2, etc... entered in cells (some cells have color index 3)
Column G-has names entered entered in cells (some cells have color index 38)
I need the macro to check if Column Y has a "N" and then if it does check Column R, O, G and if there is no color index in any of the Columns the macro will delete the row.
If Column Y has a "N" but Column R, O, G has a color index it will not delete the row.
There are 3000 rows on the spreadsheet and the macro would need to go through all the rows.
I am looking for code that would delete all columns in a worksheet that do not contain a fill color.
View 9 Replies View RelatedI am using conditional formatting to apply a light green color (index number 35).
Is there a macro that can delete the cell contents of the cells with this formatting in col K and L?
vba to auto delete cells which is filled with color. e.g if from c39 to d39 is filled with lavender i want a vba to delete cell c39 to h39 until all cells with lavender is deleted. If there are other threads like this please direct me.
0.00 00 0.00 00 0.00 00 0.00 00 0.00 00 0.00 00 0.00 00