Repeat Amount For Number Of Columns With Month Name Starting From Delivery Date?

Feb 12, 2013

I want formula which can automatically populate the amount based on the number of months starting from the date vehicle is received. For Eg.

Nissan patrol Rent is AED 5800/- per month & we deliver it on month Sept 2011 for 24 months then i want excel to automatically populate AED 5800/- for next 24 months starting from Sept 2011.

View 5 Replies


ADVERTISEMENT

Show Week Number Of Today Date From Starting Date

Jun 27, 2014

is it possible to display the week number of todays date (today()) from a physically entered start date (which would obviously be week one), the start date would be november 4th 2013.

View 3 Replies View Related

Repeat The Following Rows And Formula With Column A Starting At 9150

Oct 28, 2008

I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.

View 4 Replies View Related

Last Ocurance Of The Last Date Used For Each Month And Then Use The Cell Number To Calculate The Column Totals For That Month

Jan 28, 2010

I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year

Column A is for date input and the same date can be repeated several tumes :-

1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09

Sometimes there are all 30 /31 days but normally not .

I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.

View 9 Replies View Related

Macro To Alert If Today's Date Is Within 5 Days Of Expected Delivery Date

Sep 18, 2008

I have a worksheet that has a sent date and expected delivery date I need create a macro that will alert me if today's date is within 5 days of expected delivery date.

View 14 Replies View Related

Counting Amount Of Columns With Different Content Under Number Of Conditions?

May 16, 2014

I've been desperately trying to figure out a formula that allows me to count the number of rows in a column that have different values, but that only counts those rows in which other conditions have been met. Probably sounds a little confusing, which is why I'll illustrate it with a screenshot:

The file contains a listing of major executives of a variety of different firms in different years from 1992 onwards. In the screenshot for example, you see the executives of AAR Corp from 1992 to 1997. Since my file however consists of 240,000 rows, there's a number of c. 2400 firms with their executives over a time period of 20 years each. Since not necessarily all executives remain with their companies for the rest of their lives, some executives show up for a number of different firms in my sample.

I want to determine at how many firms each executive worked within his current industry up to the respective year, based on the information of the 2400 companies and executive data over 20 years. The current industry is classified by 1 digit SIC codes (column U) and each firm has an individual firm identifier which is the CUSIP in column S.

For example, when applying this to the first row in the screenshot (Ira Eichner), I would need a formula that counts the number of different CUSIPs (thus firms), given that the EXECID (executive ID, identifier for each executive; column I) equals 9248, the 1 digit SIC code (column U) equals 5, and the Year (column J) is below 1992.

View 7 Replies View Related

Calculate The Number Of Times Lampard Has Taken And Inswing Delivery

May 25, 2009

I want to calculate the number of times Lampard has taken and Inswing delivery, and how many times an attempt at goal ocurs from these deliveries.

The equation i'm using is =sum(if(a1:a100="Lampard",if(a3:a100="inswing",1,0)))

However, this is not calculating the correct number, and instead just equating 1.

View 9 Replies View Related

Calculate Number Of Days Between Two Date Within A Current Month Including End Date

Apr 2, 2009

I have two columns of dates, leave start and end dates (when people start leave i.e. annual leave). Would need to introduce column(s) to calculate how many days fell within the month including the end date and excludes weekends.

For example, if the staff on leave from 31st March to 6 April, i need to show that the number of leave taken as 1 day in March and 4 days in April.

View 9 Replies View Related

Identify Start Month And Repeat Same Value In Next 12 Cells

Jun 3, 2014

I am working on a formula by it is repeatedly failing.

Based on input 1 which is the month name, I am looking for a formula to identify the position across columns as the starting cell and then the value in input 2 needs to be repeated 12 times from there.

Example:
Input 1 is Apr-14
Input 2 is 51.8

I have columns with month names starting Apr-13 to Mar-15

Since the input 1 is Apr-14, the formula should identify the appropriate column named as Apr-14 and from there it should copy the value (input 2 ) 51.8 for the next 12 cells which is until Mar-15. I have attaches the examples for your quick reference.

View 3 Replies View Related

Repeat Rows By Mutiplying Current Amount Of Rows By Cell Value

Aug 11, 2009

I have a table which contains a list of branches eg;

01
02
04
06

I then have a spreadsheet which contains a number of columns and rows.

I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet

The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows

View 9 Replies View Related

Vba To Find The Month And Week Number From Given Date

Apr 22, 2009

In the attch file i have the date coulumn from this date column i need to calulate the month & week no. (like WEEK1,WEEK2..)

The Week ( Monday to sunday) which need to be calculated is the week no. in the given month

like for month of April the week1 is print in the week column for 6april to 12 april date and Week2 print for 13 April to 19 april

View 14 Replies View Related

Convert Date To Month Running Number

Dec 22, 2007

how to convert date variable to month in running number. the starting date = 1996 Jan =1 and 1996 Feb =2 .... and so on.

as i plan to generate p table report for view more then 12 month data.....

View 9 Replies View Related

How To Calculate The Week Number Of The Month Based On A Date

Dec 30, 2013

I would like to calculate the week number of the month based on a date.

Now my days would only include working weeks (Monday - Friday).

Supposed the date is 12/31/2012:

M
31-Dec
T
1-Jan
W
2-Jan
TH
3-Jan
F
4-Jan

Since it only occupies 1 day of the workweek, then it will be considered as Week 1 of January. If the date is 1/28/2012:

M
28-Jan
T
29-Jan
W
30-Jan
TH
31-Jan
F
1-Feb

It will be considered as Week 5 of January since it occupies 4 days of the working week. If the date is 4/29/2013:

M
29-Apr
T
30-Apr
W
1-May
TH
2-May
F
3-May

It will be considered as Week 1 of May since it occupies only 2 days of the working week.

Basically if the date's month occupies 3 or more of the working days of the workweek then it will be considered as part of that month's working week. Is this possible with formulas? I tried to explain it the best I can.

View 4 Replies View Related

Count Number Of Date Ranges Include Certain Month?

Oct 30, 2013

I have a a set of date ranges. The start and stop date of the ranges are listed in seperate columns. I need to count how many of those date ranges include a specific month/year. Example data is below.

Start
Stop
Month/Year

[Code].....

View 4 Replies View Related

Return Month Number Of Date Unless Cell Empty

Apr 9, 2008

I am using the MONTH function in a formula. The Month value of an empty cell is returned as "1". Why is this? Is there any way to return a null value or zero?

View 6 Replies View Related

Annual Amount By Month

Oct 27, 2006

There are two tabs in my workbook right now. The first is where users will input information and annual budget number for consulting fees. The second tab spreads the annual budget by the 12 months. I don’t want the users to see or touch this tab containing the spread. Once the annual budget number is entered, I would like them to use a combobox to choice how they would like to spread the budget monthly. One choice is evenly which is the default and the other would be manually. If they choice manually I would like a userform or something where they than input each month’s amount that will total the annual budget. See attachment, this is all I got so far.

View 2 Replies View Related

VBA To Number Rows In A Column But Starting From Specific Number

Mar 10, 2014

I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.

View 7 Replies View Related

Formula To Count Number Of Days In Date Range - Split Per Month

Jan 23, 2012

I have a large spreadsheet which holds lots of data with date ranges that i need to performs different actions to. Any way to identify the number of days, per calender month, that falls in a date range.

sample data...

Start Date
End Date
Old Value
New Value

08/03/2010
18/06/2010
16758.2
16758.1

[Code] .......

I need to break down the total number of days per month

Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec

24
30
31
18

[Code] ......

As you can see this also laps into a new year, which poses my next problem, ill probably just add more columns on to the end of the table for that though...

I will later apply different calculations to these cells but in short need to get a calculation for the number of days per month first.

(in short spreading the new value out accross the year then multiplying it by the days... i also need to apply a further daily volume cal to it).

View 8 Replies View Related

Find Starting Date And Fill In The Following Months Until End Date

Mar 4, 2013

I have collected some data on economic factors for different countries. Unfortunately, the dates when I started to calculated my economic factors are different for each country (due to the data available to me).

What I would like Excel to have done is to take the date when I started to measure for e.g. country A (D3 ie 30/06/2007), copy it into column "I" (for country A, it's cell I3) and fill in the following months in the rows below (with always the date of the last day of a month) until it reaches 28th of Feb 2013. Then, it should go up to the next country (country B) take the starting date (D4, ie 31/07/2007), go to the last entry in "I" (ie I71) and paste the date in, fill in the months until 28th of Feb 2013, do the same for country C and so on.

I have started to code a VBA but I am unfortunately a beginner in VBA and totally stuck at the moment. My VBA code does paste in the months but for some reason, it also changes the starting date of the first month.

Moreover, I tried a workaround for the fact that Excel doesnt know when to stop; ie I introduced a "monthdiff" variable which should calculate the number of months between the starting date (which is variable and unique for each country) and the end date (which is always 28th of Feb 2013). At the moment, it only does this for country A.

VB:
Set rng = ActiveSheet.Range("I3" & Cells(monthdiff, "I").Address)[SIZE=4][/SIZE]

I have tried to make this dynamic but have been unsuccessful so far.

Spreadsheet with data&code is attached.

VB:
Sub Macro1()
Dim mainrange As Range
Dim rng As Range

[Code].....

View 3 Replies View Related

Return Value Of Date Using Addition From 2 Columns That Represent Date And Number

Feb 21, 2014

I want to get a return value of date in column C whereas column A represent a date and column B represent a number. Simplest formula in excel is Column C (Feb 26, 2014)= Column A (Feb 21, 2014) + Column B (5). I want it to have in macro code.

View 14 Replies View Related

Formula That Will Determine The Number Of Days That Fall In A Specific Month Based On A Date Range

Jul 31, 2009

I'm needing a formula that will determine the number of days that fall in a specific month based on a date range. For example, if I have a date range of 10/15/2009 to 01/13/2009, I need the formula to determine the number of days in each month within the range (October has 15 days in the date range; November has 30, December has 31, and January has 13.) I have a large spreadsheet that would be so much easier to manage with such a formula. Currently, my spreadsheet is setup as follows. I need the forumla automatically fill in the number of days under each month.

Stard Date End Date Oct-09 Nov-09 Jan-10 Feb-10
10/15/2009 01/13/2009

I'm using Excel 2007.

View 9 Replies View Related

Sumifs - Calculate Amount Of Money Invoiced Per Company Per Month

Mar 25, 2014

I'm trying to calculate the amount of money invoiced per company per month. In column B I have the date the invoice was issued. In column E I have the Company name. In column G I have the amount invoiced.

View 6 Replies View Related

Auto Number Macro Starting At 5th Row

Jan 25, 2006

I need to number some rows starting at row 5. Need to place the number in column AB of each row.

Needs to quit numbering at last record (column F will have information in the last record)

i need this to be a macro, never done an autonumber macro before....

View 9 Replies View Related

Hide Columns Starting From Active Cell

Apr 30, 2008

Continuing with a large Macro I am trying to peice together, I have reached a hurdle where I need to hide all columns to the left of the ActiveCell (which varies week to week) back to column B.

I have the following code which selects the correct number of cells to the left of the active cell but doesn't highlight the whole columns - just 3 cells for each column (very odd)

ActiveCell.Offset(0, -1).Range("A1").Select
Range(Selection, "B" & Selection.Column).Select

I'm sure it must be something to do with the

Selection.Column

part as when I write

Selection.Row

it just does 1 cell for each column (as to be expected)

I should mention I already have the coding to hide the columns, just need a way to highlight the relevant ones.

View 3 Replies View Related

VBA Sum Two Columns If They Both Have Data And Repeat For Each Row?

Apr 30, 2014

I do have some other coding background. I am working on some VBA script to run against data being put into a single excel sheet. Column C will always have data, but column D will not. What I need to do is loop through each row with something like this:

Staring at row 2 (since row 1 is a header in this report)
If Column D is not blank, then subtract D from C.
Repeat for next row until the end of the data

View 4 Replies View Related

Worksheet With Page Numbers Starting From Set Number

Apr 10, 2014

Not something I've ever had to do before as i generally work with data sheets, i'm creating a document to print but need the page number to start from a set value and not default "1" of "10" etc,

I need it to start from say "5" of "15" rather than the "1" of "10",

Its simple to do in Word, but like i say not something I've ever had to think about in Excel.

View 3 Replies View Related

Macro To Repeat Number Set?

Mar 9, 2014

I have many set of numbers in column A and Coulmn B each set separated by space.I need to repeat each set to n number of times.

View 14 Replies View Related

Repeat A Formula Automatically Every Seven Columns

Feb 19, 2010

I have a formula that is working, but I want to repeat it every seven columns. I know I can drag it and release it (or drag a few and release them in the appropriate column), but at this point I have so many columns that it's quite cumbersome to do that. Is it possible to create a macro that will automatically repeat the formula in every cell seven columns to the right (the same row for all)?

My formula is in cell K7 is:

=IF(AND(K24<=0%,K24>=-2%,OR(J32="T",J32="F")),1,"FALSE")

Now I want that formula to repeat (with the proper adjustments) for cell R7, i.e.:
=IF(AND(R24<=0%,R24>=-2%,OR(Q32="T",Q32="F")),1,"FALSE")

and then to automatically continue like that for cells Y7, AF7, AM7, and so on.

View 6 Replies View Related

Simple Macro To Repeat On Next Row On Same Columns

Jan 22, 2014

I've recorded a macro which selects a few cells in a row, copies them and pastes them again over the same cells (special paste - only values), and I've attached this macro to a button.

I would like the macro to repeat the same action on the next row for the same columns, each time the button clicked.

How to update the macro to move to the next row each time initiated?

View 5 Replies View Related

F4 Does Not Repeat Insert Rows Or Columns

Sep 12, 2009

My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved