# VBA To Number Rows In A Column But Starting From Specific Number

Mar 10, 2014
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.

View 7 Replies
ADVERTISEMENT
Jun 2, 2014

I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.

What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.

These are the columns that I have in my spreadsheet:

Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15

View 2 Replies
View Related
Feb 13, 2013

I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.

For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.

The below code counts the total which is not what i need.

Code:

Sub test()

Dim Mycount As Single

Mycount = Application.Count(Range("A:A"))

Cells(1, 4) = Mycount

End Sub

View 2 Replies
View Related
Jun 19, 2013

I use the following code to copy entire rows from one sheet to another and this is pretty standard.

VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)

Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.

View 5 Replies
View Related
Jun 29, 2008

I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.

both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.

View 9 Replies
View Related
Jul 18, 2013

I have a code which is copy/pasting the selection specified number of times

VB:

Sub CopyNtimes()

Dim i

For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)

With Selection

.Copy .Offset(i * .Rows.Count)

End With

Next

End Sub

How to modify this code so that it can paste the selection specified number of times leaving specified number or rows

For Example:

Selection is A1:Z10

need to copy paste 2 times...

Rows to leave: 3

So it should paste in the range A14:Z24 and then A28:Z38

View 5 Replies
View Related
Jan 25, 2006

I need to number some rows starting at row 5. Need to place the number in column AB of each row.

Needs to quit numbering at last record (column F will have information in the last record)

i need this to be a macro, never done an autonumber macro before....

View 9 Replies
View Related
Mar 6, 2010

I want to eliminate all column that contain number 3 in row A2:K2 as shown in the table below

Are highlighted in color yellow.

*ABCDEFGHIJK1123456789101121,2,31,3,91,3,131,5,131,9,111,9,133,5,73,5,93,9,114,9,135,11,13

View 9 Replies
View Related
Jun 9, 2007

I have two columns in excel. Column “A” where I have different group names column "B" all the different numbers and column “C” where I have ranked based on column “A”. I need a formula that would pick a number that is ranked 51 with specific group. Currently I’m using below formula (where MC1 represents one of the groups)that is working great unless there is no tie, however if there is a tie for rank 51 and let say two numbers are 22 and 22 the formula will return 44.

SUMPRODUCT(--(Terr!$Q$16:$Q$518=MC1),--(Terr!$AC$16:$AC$518=Main!C69+1),Terr!$Z$16:$Z$518)

View 4 Replies
View Related
Apr 10, 2014

Not something I've ever had to do before as i generally work with data sheets, i'm creating a document to print but need the page number to start from a set value and not default "1" of "10" etc,

I need it to start from say "5" of "15" rather than the "1" of "10",

Its simple to do in Word, but like i say not something I've ever had to think about in Excel.

View 3 Replies
View Related
Jan 8, 2014

I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?

View 6 Replies
View Related
Feb 12, 2009

I wrote an excel program in Excel'03 for a dental office to manage state assistance patients and one of the table columns is the state assistance number. The problem is that the program defaults to a number format when it is entered instead of a text format, which is what I want. The issue is that state assistance numbers are always 8 digits and when it defaults to a number field the program drops the required preceeding zeros.

For example the number 00123456 will sometimes show up as 123456, which is wrong. It's like sometimes it will show up right and other times it gets a butterfly in its brain and deletes those zeros irritating the receptionist here. So, how do I get the table to either stay in text format or set up a number format that keeps the preceeding zeros?

View 3 Replies
View Related
Jan 8, 2014

I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?

View 3 Replies
View Related
Jun 3, 2014

I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.

View 1 Replies
View Related
Jun 4, 2014

I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.

examples.xlsxâ€Ž

View 1 Replies
View Related
Feb 3, 2014

How to translate a specific number into a specific letter related to the number itself.

I have lots of different numbers for example all going down a specific cell (These numbers I want to separate into 3 different catagories. The positive numbers I want to be calculated as the same Letter that is next to that row directly over to the left of that cell.

So if the letter

B / cell / cell / +9 / Then I want if its a positive number like +9 to answer in the formula with the same letter (B) listed to the right in the same row in a different cell of course

B / cell / cell / -6 / Then I want if its any negative number like -6 to answer in the formula as the opposite Letter of (P) listed to the right in the same row in a different cell of course

P / cell / cell / +17 / Then I want if its a positive number like +17 to answer in the formula as the same letter (P) listed to the right in the same row in a different cell of course

P / cell / cell / -3 / Then I want if its a negative number like -3 to answer in the formula as the opposite Letter of (B) listed to the right in the same row in a different cell of course

and thirdly if its a (0) zero and only (zero's) Then I want the answer to stay (0) zero.

The number can be any numbers it doesn't matter. Only distinction is that positive number of +1 and up repeat and stay the same letter that the cell on the far left is already stated.

and all the negative number of -1 amd below all reverse the letter to the opposite letter of (B to a P) or (P to a B) listed to the right in the same row in a different cell of course

and of course (0) zero would be listed as a positive number and only return a (0) zero as the result of the formula.

View 9 Replies
View Related
Mar 8, 2014

I am having trouble setting up my cycle count spread sheet. For instance if my starting number is 1000 and when it reaches 0 or below it starts to count in minus when I just want it to automatically reset to 1000

View 3 Replies
View Related
Apr 29, 2014

I am looking for a formula to return the column number of the array when a specific text is found, in this case the text is "Yes"

The Array will only ever be 5 cells beside each other in a row

for example, M4:Q4, will be as follows - No No No Yes No

I want a formula to look at these 5 cells and return the number 4 as that is where the "Yes" value is

View 5 Replies
View Related
Aug 7, 2009

I am sure this should be REALLY simple, but i just can't find the answer i'm looking for. I have a sheet which changes daily in quantity of information. I want some simple code which counts up the number of populated cells in column A and returns the answer to a cell in another worksheet - or just automatically use it to print that number of pages.

I think i should be able to do the printing side, but, currently have no idea how to count up the number of populated cells in the row. If someones feeling very generous though, giving me the code for printing that number of pages too would save me some work (the worksheet which needs printing is different to the worksheet which needs the number of cells adding up.)

View 2 Replies
View Related
Mar 13, 2014

I'm using the VBA code below for a piece of code.

[Code] .....

However, I want to use this same function in another place, without the limit set on the cells that will be cleared.

What I would like to do is send the formula the cell to start at (E14), offset that by one column, and then send a number of rows. With that, create the range to be cleared.

Something like:

[Code] .....

View 3 Replies
View Related
Mar 6, 2014

I have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.

The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.

If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.

View 2 Replies
View Related
Jan 5, 2009

I type random numbers into column B

I want cell E10 to read column B then display (number 26 for example) how many times number 26 appears in column B

View 9 Replies
View Related
Jan 20, 2009

I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)

second question

I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)

View 3 Replies
View Related
Feb 12, 2013

I want formula which can automatically populate the amount based on the number of months starting from the date vehicle is received. For Eg.

Nissan patrol Rent is AED 5800/- per month & we deliver it on month Sept 2011 for 24 months then i want excel to automatically populate AED 5800/- for next 24 months starting from Sept 2011.

View 5 Replies
View Related
Aug 22, 2014

I am trying to create a graph that is conditional on two different columns. The first column is a date column, the second column has various categories. I want to show how many times each category appears per month. This database is continually added to so I wanted the formula to reflect the entire column range.

For example, let say I have 5 categories (Grapes, Apples, Peach, Pear, Banana). Column A would show a date (in a M/D/Y format) and Column B would list the fruit type. I want to show how many Grapes were input in January, February, March, etc. and then move on to show how many apples in each month, and so on.

View 5 Replies
View Related
Apr 28, 2006

on one sheet we have a summary of the main list, which includes totals of money recieved, totals of all the different sources (ie, where they heard about us from), the totals of the frequencies they pay (ie, how many donate monthly, quarterly...) ... etc. on the next sheet we have the "main" list of donors, their IDs, amounts, frequency, source ...

the totals on the first sheet are updated manually, but i want to change that as there are a great number of errors.

View 8 Replies
View Related
Jul 30, 2009

We're trying to use one template to enter data with users being able to start entry from a number of different starting points. this changes they way the look-ups have to work. The attached sample explains it a whole lot better.

View 2 Replies
View Related
Mar 22, 2009

In 1 cell i need a forumla to give me a starting number and take one away each time a code or codes are dislayed in a cell range. Something like this

A1 = 23 days or any number days i needed

Cell range B1:C52

every time a selected 1 or 2 letter code appears in the cell range i want A1 to subtract 1 day from the starting number, i would need it to subtract half a day if one code appears ie HD, the codes may be P, OT, HD

View 4 Replies
View Related
Oct 28, 2008

I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.

View 4 Replies
View Related
Mar 1, 2014

I work on a daily basis with spreadsheets in excel. The number of columns is the same, but every single spreadsheet has a different number of rows. I recorded this macro in a table with 1196 rows and I would like to use this macro also in other tables with a different number of rows.

Sub City2()

'

' City2 Macro

'

'

Selection.Copy

Cells.Replace What:="POMPANO", Replacement:="Pompano Beach",

[Code].......

View 12 Replies
View Related