I am running an array formula which is working fine except that I now need to add a further condition: that a one of a number of values in cells C1:C8 is found in range $a1:$A500. I've tried Or with comma separation and with * separations but nothing seems to work.
Can anyone advise me of the syntax?
Add a condition to this formula Let us assume for the column (classes) and the condition is selected from the cell "G1"
Condition E2: E30 = G1
ID
NAME
CODE
Birthday
[Code]....
with the formula below..
=SUM((Sheet2!A$4:$A$17475=AM2918)*(Sheet2!B$4:$B$17475=AN2918)
*(Sheet2!H$4:$H$17475="Left")*(Sheet2!$E$4:$E$17475>=AR2918)*(Sheet2!$E$4:$E$17475)
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I have three columns of Data. A is vehicle number, B is miles and C is a Date. I want to be able to pull the miles for the newest date when the user types in a bus number next to the formula. I think It can be done with an array formula but I am not 100% sure on how to do it. Also is it possible if they enter a vehicle number and a date that a different formula finds the miles for the most recent date to the date entered.
Excel Help.JPG
Is it at all possible to refer to a array that may change in a formula?
For example I need to use a Vlookup formula, however the table array will change depending on the value of another cell.
I need the user to be able to select the column heading that the lookup should work off from a drop down list. So if the user selects column heading C, the array should start from column C though it will always end at column Z. If the user selects column heading Y the array would be Y:Z.
I'm trying to use arrays in a macro!
Here's my
Sub ArrayTest()
'
' ArrayTest Macro
'
Dim Array1() As Variant, Array2() As Variant
Dim R As Integer, ilR1 As Integer, iLR2 As Integer
ilR1 = Cells(Rows.Count, 1).End(xlUp).Row
iLR2 = Cells(Rows.Count, 7).End(xlUp).Row
ReDim Array1(1 To ilR1)
ReDim Array2(1 To iLR2)
For R = 1 To ilR1
Array1(R) = Cells(R, 1) & Cells(R, 2) & Cells(R, 3)
Next R
For R = 1 To iLR2
Array2(R) = Cells(R, 7) & Cells(R, 8) & Cells(R, 9)
Next R
For R = 2 To UBound(Array1)
If WorksheetFunction.CountIf(?????, Array1(R)) > 0 Then Cells(R, 4) = "old" Else Cells(R, 4) = "new"
Next R
'
End Sub
Basically, the macro concatenates the content of three columns from two different tables into two arrays. Array1 contains the current stuff and Array2, the old one. If I CountIf items from Array1 into the content of Array2, I should get what's new (count 0).
Now, ? in the code should refer to the content of Array2. How do I do that?
The errors I get are 424 object required [Array(iLR2)], 1004 method 'Range' of object '_Global' failed [Range(Array2) or Range(Array2(2), Array2(iLR2))], or type mismatched [Array2].
I have the following array function that I am trying to get to work properly:
ActiveCell.FormulaArray = "=SUM(IF(NCR!O2:O100=39326,NCR!Q2:Q100,0))"
39326 is the value of 9/1/2007, and this formula works properly.
I am looking for a way to use this formula but replace 39326 with whatever date is in the first row of the same column as the active cell when it is run.
That is, if the macro was run with cell B8 as the active cell, "39326" would be replaced with whatever value was in cell B1.
I'm working on a project in Excel (for a restauraunt) and I basically need to make a formula to work out what an item is, using it's ID number and referencing the certain menu that it is in.
as you can see the table array is defined in cell E3, but i still get a #N/A result, and when I replace the "E3" in the formula with "Deserts" it produces a result.
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
I am using COUNTIFS to work a formula for finding an average of a SUMPRODUCT. Formula:
View 2 Replies View RelatedI have the following formula
=SUMPRODUCT(INDIRECT($B3&"I3:I1000")*(INDIRECT($B3&"K3:K1000")>0)*(INDIRECT($B3&"u3:u1000")=$F$1)*(INDIRECT($B3&"p3:p1000")=$D$1)*(INDIRECT($B3&"r3:r1000")=$H$1))
Cells F1, D1 and H1 contain dropdown lists matching values in the referenced columns, PLUS they all contain the option All, which effectively means that the condition should return true.
I need something like if($F$1='All',1,(INDIRECT($B3&"u3:u1000")=$F$1))), but this doesn't work
I currently have a Row with this value
row1 lh lh lh
row2 8 12 8 5 2
First I will need to check if the column has an "lh" if true then sum row2, however i will need a second condition that will check that if >8 it will use the value 8 instead of 12.
However if value is<=8 get that value from the cell.
In this case the correct answer is
8 + 8 + 5 = 21
8 (because it is <=8 get the value from the cell) + 8 (because 12 is>8 use the value "8") + 5 (because <=8)
im currently using a static array to select multiple sheets at once which works alongside another Sub
Sheets(Array("Group1", "Group2", "Group3", "Group4")).Select
i have a button that creates a new sheet and names it "GroupX" X being the next number, it automatically adds on the right number by itself and it works fine...
i want it my array to be dynamic so that i dont have to manually edit the array and the macro every time i add a new sheet.
i have tried things like:
Dim MyArray As Variant
Dim Shts As String
K = Sheets.Count - 4
For p = 1 To K
Shts = "Group" + p
Redim MyArray(K) As String
MyArray(K) = Shts
Next p
Sheets(MyArray(K)).Select
Basically, I'm trying to alter the code by inserting another condition where if S12 = R than it will exclude the value found in D12, other wise D12 is included. It was initally setup with a range of $C12:$H12 but i had to write it out long to exclude $D12
Here's my ammended ...
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
=COUNTIFS(Sheet1!$ColA:$ColA,Sheet2!$ColA:$ColA,Sheet1!$ColB:$ColB,"paid")
Sheet1:
ColA
ColB
123
paid
[Code] .....
Sheet2:
ColA
ColB
23
NY
[Code] .....
Given three criteria (category, name and date) I want to find the specific value within the table or array. refer to attachment.
View 4 Replies View RelatedI have a large table of data sorted by date and I need to get the last value for a given variable. in certain instances using LOOKUP(9.999999E+307,sheet1!A:A) works but not when I'm trying to get values for past dates
Her is an example table:
Date
Month Value
Variable
1/2/14
1
11
[Code]...
If i need to find the last value for the month of February, in this case 514, what combinations of formulas should I use? I feel like this should be easier than I making it out to be.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Basically have a spreadsheet to track an athletic competition going of for the purposes of a fantasy game (like fantasy football). The scores from each event are being copied and pasted into a data pages and then other pages pull from that for calculations. I'm using rankings (rank.eq equation) on a calculation tab, and then using those rankings on a leader-board tab find placement via the VLookup function. The issue I'm running into is ties, when two people are ranked the same. I've been playing with this:
=IF(ISERR(VLOOKUP($J17,Men!$A$1:$G$43,7,FALSE)),VLOOKUP($J17,Men!$A$1:$G$43,7,FALSE),
VLOOKUP($J16,INDIRECT("Men!A" & LOOKUP(J16,Men!A1:A43)+1):$G$43,7,FALSE))
Where it checks for an error in the Vlookup, if its not an error then it does the VLookup, if it is then if looks up the previous ranking and the VLookup array uses Lookup to find the position of the last rank, increments it by one and starts the new Vlookup there.
I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.
View 2 Replies View RelatedI am trying to change the variable value in my following code through array.
What I want is that both the statements
Debug.Print testarray(0) & "........" & testarray(1) & "......." & testarray(2)
Debug.Print custname & "........" & custaccount & "......." & worthcredit & vbCrLf & vbCrLf
should deliver me the same values i.e changedname 123456 and true
for testarray(0),testarray(1),testarray(2) i am getting the values but I am not able to change the variable values for custname ,custaccount and worthcredit, although I am accessing the same elements.
Here is full ....
My question is about assigning an entire array to a single variable. In this case, I want to assign an entire array to one element of another array.
View 6 Replies View RelatedI have a variable array, that is, the first cell of the array is variable and the last cell is variable. I have dimmed the first cell , "firstcell" as a range. I have dimmed the last cell , "lastcell" as a range. I'd like to sort the array but first I have to select all cells in the array. Need the proper syntax to select all cells between "firstcell" and "lastcell" in my macro.
View 2 Replies View RelatedCode:
Dim MyArray as Variant
Dim Address
MyArray = Range([a1], [b10])
For varRow = 1 To UBound(MyArray, 1)
' I want to know the current address of the cell right here,
' For instance I want to know I'm working with A1 right here
' Is that possible?
Next I guess my question is how do I find out the originating address of the cell I'm working with in an array. I need to check the font color of A1,B1,C1 etc while working in that range and I have no idea how to access it.
how to do is the assignment of GoodArray1 to CurrentArrayToUse, i.e. "CurrentArrayToUse = GoodArray1" below:
Global NextArrayToUse()
Global CurrentArrayToUse()
Global PreviousArrayToErase()
Global GoodArray1(), GoodArray2(), [etc]
Global CurrentGuessNumber As Integer
[bunch of code, part of which assigns a number to CurrentGuessNumber, then the following...]
Select Case CurrentGuessNumber
Case 1
CurrentArrayToUse = GoodArray1
NextArrayToUse = GoodArray2
Case 2
CurrentArrayToUse = GoodArray2
NextArrayToUse = GoodArray3
PreviousArrayToErase = GoodArray1
ReDim PreviousArrayToErase(0, 0)
I'm trying to populate a worksheet using arrays.
View 14 Replies View RelatedI need to create an array with a variable as it size For instance:
View 2 Replies View RelatedI created an Index/Match array forumula in the worksheet. It works.
View 2 Replies View RelatedI am trying to do is to build an array from a series of cells that may or may not contain text.
For example cells A1:A6 may be equal to red, orange, yellow, green, blue and purple,
but each cell may also be blank.
So I might also have blank, blank, yellow, blank, blue, purple.
Is there a way I can make an array of just {yellow, blue, purple}? and then the next time it may be {red, blue}
Or can I index only cells that have text?
In the end, I just need a way to make a selection from only those cells that have text.