Reset / Clear ComboBox
Jan 11, 2008
I have a userform with several combo boxes on it. I also have three command buttons, 'OK', 'Reset' and 'Cancel'. I want to code the 'Reset' command button to reset the values of the combo boxes to empty or "". I have attempted to do this simply by using the following code.
Private Sub cmdReset_Click()
cmbWaterTemp.Value = ""
cmbTypeFastIce.Value = ""
cmbIceDrift.Value = ""
cmbTrendBehavior.Value = ""
End Sub
When I click on the 'Reset' command button I get the following error.
"Run-time error '94':
Invalid use of Null"
When I use the debug tool the error pointed to is a different sub.
Private Sub cmbWaterTemp_Change()
txtTemp1Encoded.Text = Left(cmbWaterTemp.value, 1)
txtTemp2Encoded.Text = Right(cmbWaterTemp.Value, 1)
End Sub
I am not exactly sure why the error points to this sub. I know there must be a simple way to accomplish this. I am including a workbook that is similar though not exactly the same due to file constraints. What I want to happen is when the 'Reset' button is clicked is to clear all values for the combo boxes and the text boxes. I have successfully gotten the textbox values to clear although not the combo boxes.
View 4 Replies
ADVERTISEMENT
Jun 19, 2007
How come I keep having the same value for "lastrow". eg: 35
lastrow = ActiveSheet.UsedRange.Rows.Count
It doesn't matter how many rows of data I've changed, it still show lastrow = 35.
I tried to add an extra line above but still doesn't work:
lastrow = 0
lastrow = ActiveSheet.UsedRange.Rows.Count
View 9 Replies
View Related
Sep 3, 2009
I'm just finishing a project that is a collection of three calculators, each of which returns data based on a series of user-supplied variables. All the mechanics are working [thanks in part to replies to previous posts], but there is one more thing I'd like to add:
Does anyone have a way to clear the contents of another cell [actually several] cells via another cell? As the most complex calculator requires eight variables to be entered, I'd like to provide a quick way [a button?] to "clear" or "reset" the calculator - basically wipe all unlocked cells. I should note that all of the cells in question already have Data Validation of one type or another.
View 10 Replies
View Related
Jul 18, 2013
I am working on some code that I would like the user to be able to re-run should the underlying data in the adjacent tabs change. My existing code is shown below
Code:
Option Explicit
Dim wb As Workbook
Dim ws As Worksheet
[Code]....
I'd like to be able to remove all data on the ALL tab so that when the UsedRange.Rows.Count is run again on that page it will only see the header row. In the past I've deleted or cleared data from the sheet and the Rows.Count still counts the rows which have no content in them.
View 2 Replies
View Related
May 27, 2008
Is there a function that reset all the combobox and textbox at once?
It is because I have changed my userform and now there is nearly 100 combo and textbox in it.
View 9 Replies
View Related
Jan 4, 2013
I have multiple comboboxes with correlating checkboxes. That is, checkbox 1 goes with combobox 1, 2 goes with 2, etc.
When a particular button is pressed, I would like the combobox to clear it's value if it's checkbox value is false. I was hoping there would be an easier, more efficient process than what I have, which works and is as follows:
VB:
Private Sub cmdbTest_Click()
z = "dep"
Call TestSub(z)
z = "loc"
Call TestSub(z)
[Code]...
I currently have 8 comboboxes. Tags were used for the comboboxes during another process which are not used on the checkboxes, so that option is out.
View 1 Replies
View Related
Sep 25, 2009
I have a combobox from the Forms Toolbox inserted in a worksheet and have a macro assigned to run when the user selects a value. After the value is selected in the combobox I'd like the combobox to clear itself (show a blank). Currently the selected value stays highlighted in the combobox after the selection is made. I know how to do this with a Controls combobox, but cannot figure out how to use it with a Forms combobox. (The reason I am not using the controls cb is because there seems to be an Excel2007 bug that causes the properties of the displayed text to randomly change when the control is activated. When a selection is made in the controls cb, the text displayed in the cb turns bold, and either grows or shrinks in size to the point that it is unreadable. Same thing seems to happen with all other ActiveX controls...)
Sample attached.
View 4 Replies
View Related
Apr 23, 2014
I have two separate workbooks, the first is called Job test and is to be used as a template for quoting jobs, the second is called Fixtures and is a database of fixtures that are organized in table. I keep them separate as multiple jobs will use the Fixtures DB workbook and I want to be able to update it and add new fixtures in one area. In order to facilitate this I have a macro that opens the Fixtures DB workbook anytime that the Job test workbook is opened. In the Job test workbook I have multiple dropdowns that I hope to make dependent or cascading by means of filtering the Fixtures DB workbook. The issue I have run into is with the following code.
Code:
Private Sub CLightType_Change()'Filters LampType
Workbooks("Fixtures.xlsm").Sheets("CLampType").Activate
Workbooks("Fixtures.xlsm").Sheets("CLampType").Cells.Clear
Workbooks("Fixtures.xlsm").Sheets("Fixtures").Cells.AdvancedFilter Action:=xlFilterCopy, CriteriaRange _
:=Workbooks("Job test.xlsm").Sheets("Criteria").Range("A1:A2"), CopyToRange _
:=Range("A1"), Unique:=False
[Code] ......
What this code hopes to achieve is that when I change the value in the LightType dropdown, the Fixtures DB workbook will automatically filter the data once to a different sheet(CLampType), then get only unique values for LampType in column O. I have set up a dynamic range for column O so as to populate my next combobox, LampType.
This should all be fairly simple and straightforward, however I am running into "Run-time error '1004': Clear method of Range class failed." when I try to execute the line to clear the worksheet, and also have an error when I try to filter the data via macro. The strange part is all of this can be done manually without a problem, and moreover I have tried recording the process and using the recorded version. Even stranger yet is that when I add an "on error resume next" before everything, the code works fine but keeps looping and acts finicky(I don't want to simply resort to this as a solution). I have also tried setting this macro up inside the Fixtures workbook instead and calling it from the combobox change, to no avail.
View 1 Replies
View Related
Aug 15, 2014
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
View 9 Replies
View Related
Mar 30, 2009
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
View 9 Replies
View Related
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
Dec 8, 2009
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies
View Related
Jun 20, 2009
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
View 14 Replies
View Related
Sep 28, 2013
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
View 2 Replies
View Related
Jun 12, 2006
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
View 9 Replies
View Related
Feb 8, 2008
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies
View Related
Jun 5, 2006
I have a workbook with 20 worksheets the first is a summary called Discount Set the 19 sheets with various names
The 19 sheets in column H4:H40 u enter a number greater than 0 which is the quanty required. This is used to calculate a price on which ever row it is entered
the selection must only affect numbers as there are rows that are just shading and they contain no data .
So u could enter quanties on serval rows of different sheets to get a total price displayed in the Discount set
What I want to do is have button on the Discount Set which will clear any quantity that does not equal 0 back to 0 in column H which will reset the total 0.00
View 9 Replies
View Related
Sep 15, 2014
Reset Counter to Zero:
I have Record ID on Column A: Auto Increment
I have a vendor Name on Column B: Vendor 1, Vendor 2, Vendor 3
I have a Code on Column C, Code A, Code B
What I want to happen is the Counter to count +1 each time. it sees the same vendor, same code and only to count to 4. As soon as it counts to 4; the next counter should be 0 (Zero).
Col A Col B Col C Col D
======= ====== ===== =======
Record ID Vendor Code Counter
======= ====== ===== =======
1 Vendor 1 Code A 1
2 Vendor 1 Code A 2
3 Vendor 1 Code A 3
4 Vendor 2 Code B 1
5 Vendor 1 Code A 4
6 Vendor 1 Code A 0
8 Vendor 2 Code B 2
9 Vendor 2 Code B 3
10 Vendor 1 Code B 4
12 Vendor 1 Code A 1
13 Vendor 1 Code A 2
14 Vendor 1 Code A 3
15 Vendor 2 Code B 0
It can be either in VBA or formula...
View 2 Replies
View Related
Jan 15, 2009
Is there a way to take the values between C2 & D2 and have them automatically post in column F ?
View 2 Replies
View Related
Oct 24, 2008
is there anyway i can reset this to start at st001 ive got everything done but i need to reset the orders to start at st001
View 3 Replies
View Related
Jun 2, 2009
I know that a variable of string type is equal to "" before it's assigned a value. So I reset the value of strings to empty (i.e. "") when I want them clear of a value. I also know that variables of Variant Type are equal to NULL when they are unassigned so I reset them to NULL when I want to clear them of a value.
But what about a Long? When you declare a variable of Long Type or Int Type or Double Type, what is it's inital value when empty and unassigned. I assume it's not 0 since 0 is an actual number.
I want to reset my lng variable and clear it of a value. So I'm wondering what should I set to... How can i do this?
View 3 Replies
View Related
Oct 23, 2012
I have a textbox that pulls language using the following code:
Code:
Private Sub TextBox1_Enter()
TextBox1.Value = Sheets("Language").Range("B2").Value 'places the value of the cell into the textbox
[Code]....
Randomly and sporadically, when working in the textbox, the form seems to reset. By reset, I mean that the language resets to what was there originally.
View 1 Replies
View Related
Jan 18, 2014
In the below mentioned query, i want to reset the range according to the find result. Here the range I6 need to change with the active cell with a row down
Windows("Holiday Uploader Workings.xlsx").Activate
Cells.Find(What:=Reply, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
[Code]....
View 3 Replies
View Related
Apr 1, 2007
When I execute a macro, and if during the macro execution I press the "Esc" key, the execution stops and I get a Microsoft Visual Basic window with the message that code execution has been interrupted with buttons to Continue, End, Debug and Help. If I click the "End" button, the window closes and Excel is at rest - which seems to be some sort of Reset process.
I have a need to execute that process while Excel is at rest.
Is there any way to code the process in VBA?
View 9 Replies
View Related
May 28, 2009
i have cells A1 to A10 filled with numbers
i have cells B1 to B10 blank
what i need to do is when something is typed in cell B1 - A1 to A5 are reset to zero and when i type something in cell B2 - A2 to A6 reset to zero.
I have tried to do this as a range ie
A1- A10 have numbers in B1 - B10 copy these numbers and reset if anything is typed in C1 with this formula =IF(C1:C5="",A1,"0") what it should do is reset B1 to zero if anything is typed in C1-C5 but only when something is typed in C1 does this work ..
View 9 Replies
View Related
Jun 20, 2006
I am not experienced at all with Excel, here is my problem: In column "A": I have 288 rows and has nothing but numbers in them. Row 1 is the lowest number, row 288 is the highest number. In each row the numbers typically increase; every once in a while the numbers may stay the same, but the number will never be lower. The numbers range from 0 through 600,000.
What I want to do is have column "B" follow column "A" until the cell total reaches 12000. The next cell in column "B" would then reset and start all over from "0". I want it to keep on reseting every 12000 counts. Another potential problem is that a majority of the time the cell value will not be an even 12000, 24000, 36000 etc. They may be more like A40: 11742 A41: 13201 etc.
View 5 Replies
View Related
Nov 27, 2012
I have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
View 8 Replies
View Related
Jan 23, 2009
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I attached a xls to this post to explain better.
View 14 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
View Related