Clear Combobox Based On Checkbox Value
Jan 4, 2013
I have multiple comboboxes with correlating checkboxes. That is, checkbox 1 goes with combobox 1, 2 goes with 2, etc.
When a particular button is pressed, I would like the combobox to clear it's value if it's checkbox value is false. I was hoping there would be an easier, more efficient process than what I have, which works and is as follows:
VB:
Private Sub cmdbTest_Click()
z = "dep"
Call TestSub(z)
z = "loc"
Call TestSub(z)
[Code]...
I currently have 8 comboboxes. Tags were used for the comboboxes during another process which are not used on the checkboxes, so that option is out.
View 1 Replies
ADVERTISEMENT
Jan 16, 2008
I have a worksheet with several rows (A3:H70). Column J contains checkboxes (1 in each row). I'm trying to develop a macro that will clear rows based on the value of the check boxes. For example, if the checkbox on J3 is checked, that row (A3:H3) will be cleared.
If the checkbox on J4 is UNchecked, then that row will be skipped and so on.
View 9 Replies
View Related
Jan 30, 2008
I am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
View 2 Replies
View Related
May 28, 2014
Trying to create a simple loop that will change the visibility of a large quantity of CheckBoxes when a certain value is selected within a ComboBox . I'm very new VBA programming and loops are not something I've tried yet. My code currently is this:
[Code]......
When I run it, I get a "Compile Error: Invalid qualifier".
View 2 Replies
View Related
Jan 1, 2007
I have a sheet with 550 checkboxes (form toolbar). I want to be able to reset the boxes to unchecked with a button. I found an example here but I seem to need the label (Ex: "Check Box 1")
Sub UnCheckit()
ActiveSheet.Shapes("Check Box 1").ControlFormat.Value = False
End Sub
It doesn't make sense I would need to leave the label showing on the sheet, but the label seems to be the identifer for each checkbox, not the named cell. So I am a little confused how to alter the code.
So when it works it looks like:
[] Check Box 1 Click this box to indicate something
While I wanted it to look like:
[] Click this box to indicate something
(I guess control checkboxes was the way to go but we are here now.)
View 5 Replies
View Related
Jan 6, 2008
I have created a checkbox which places a "TT" on a master sheet when checked on the NEW8 sheet. What I want to know is how do I get the "TT" to delete from the master sheet when unchecked on the NEW8 sheet. Below is what I have...
View 9 Replies
View Related
Sep 13, 2007
I have a check box that when checked needs to take information from multiple cells and copy into multiple cells and then when uncheck remove the data from the cells.
I have attached a sample.
View 4 Replies
View Related
Jan 11, 2008
I have a userform with several combo boxes on it. I also have three command buttons, 'OK', 'Reset' and 'Cancel'. I want to code the 'Reset' command button to reset the values of the combo boxes to empty or "". I have attempted to do this simply by using the following code.
Private Sub cmdReset_Click()
cmbWaterTemp.Value = ""
cmbTypeFastIce.Value = ""
cmbIceDrift.Value = ""
cmbTrendBehavior.Value = ""
End Sub
When I click on the 'Reset' command button I get the following error.
"Run-time error '94':
Invalid use of Null"
When I use the debug tool the error pointed to is a different sub.
Private Sub cmbWaterTemp_Change()
txtTemp1Encoded.Text = Left(cmbWaterTemp.value, 1)
txtTemp2Encoded.Text = Right(cmbWaterTemp.Value, 1)
End Sub
I am not exactly sure why the error points to this sub. I know there must be a simple way to accomplish this. I am including a workbook that is similar though not exactly the same due to file constraints. What I want to happen is when the 'Reset' button is clicked is to clear all values for the combo boxes and the text boxes. I have successfully gotten the textbox values to clear although not the combo boxes.
View 4 Replies
View Related
Sep 25, 2009
I have a combobox from the Forms Toolbox inserted in a worksheet and have a macro assigned to run when the user selects a value. After the value is selected in the combobox I'd like the combobox to clear itself (show a blank). Currently the selected value stays highlighted in the combobox after the selection is made. I know how to do this with a Controls combobox, but cannot figure out how to use it with a Forms combobox. (The reason I am not using the controls cb is because there seems to be an Excel2007 bug that causes the properties of the displayed text to randomly change when the control is activated. When a selection is made in the controls cb, the text displayed in the cb turns bold, and either grows or shrinks in size to the point that it is unreadable. Same thing seems to happen with all other ActiveX controls...)
Sample attached.
View 4 Replies
View Related
Apr 23, 2014
I have two separate workbooks, the first is called Job test and is to be used as a template for quoting jobs, the second is called Fixtures and is a database of fixtures that are organized in table. I keep them separate as multiple jobs will use the Fixtures DB workbook and I want to be able to update it and add new fixtures in one area. In order to facilitate this I have a macro that opens the Fixtures DB workbook anytime that the Job test workbook is opened. In the Job test workbook I have multiple dropdowns that I hope to make dependent or cascading by means of filtering the Fixtures DB workbook. The issue I have run into is with the following code.
Code:
Private Sub CLightType_Change()'Filters LampType
Workbooks("Fixtures.xlsm").Sheets("CLampType").Activate
Workbooks("Fixtures.xlsm").Sheets("CLampType").Cells.Clear
Workbooks("Fixtures.xlsm").Sheets("Fixtures").Cells.AdvancedFilter Action:=xlFilterCopy, CriteriaRange _
:=Workbooks("Job test.xlsm").Sheets("Criteria").Range("A1:A2"), CopyToRange _
:=Range("A1"), Unique:=False
[Code] ......
What this code hopes to achieve is that when I change the value in the LightType dropdown, the Fixtures DB workbook will automatically filter the data once to a different sheet(CLampType), then get only unique values for LampType in column O. I have set up a dynamic range for column O so as to populate my next combobox, LampType.
This should all be fairly simple and straightforward, however I am running into "Run-time error '1004': Clear method of Range class failed." when I try to execute the line to clear the worksheet, and also have an error when I try to filter the data via macro. The strange part is all of this can be done manually without a problem, and moreover I have tried recording the process and using the recorded version. Even stranger yet is that when I add an "on error resume next" before everything, the code works fine but keeps looping and acts finicky(I don't want to simply resort to this as a solution). I have also tried setting this macro up inside the Fixtures workbook instead and calling it from the combobox change, to no avail.
View 1 Replies
View Related
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
Jun 20, 2009
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
View 14 Replies
View Related
Jun 12, 2006
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
View 9 Replies
View Related
Feb 8, 2008
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies
View Related
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
View Related
Mar 20, 2012
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
If Worksheets("Dosing").Range("BM21").Value = 0 Then
CheckBoxLD.visable = False
Else: CheckBoxLD.visable = True
End If
End Sub
View 4 Replies
View Related
Jan 26, 2007
I have several checkboxs in an excel sheet, that if one is checked i would like it to make a change to a variable in a macro that will run when saving a file.
for an example:
if checked:
Checkbox1 = NCE1
Checkbox2 = NCE2
Checkbox3 = NCE3
Checkbox4 = NCE4
Checkbox5 = NCE5
I have a bit of code that is like this....
ActiveWorkbook.SaveAs ("\marketing2PartageNonconforms" & sF1 & " - CO" & sF2 & " - FC" & sF3 & ".xls")
I would like sF1 to change depending on which checkbox is checked. so if checkbox1 is checked, than sF1 = NCE1 .
View 9 Replies
View Related
Mar 20, 2014
I have a part of code but would need to see if there is a simple way to combine all my textbox to become negative value If my Combobox is checked.
In my Module, This will Calculate my Textbox11 each time I call for my Sub
This will call my Sub updateTextBoxes() I have set up from Textbox2 to textbox10
In my Userform I have a CheckBox1. If this CheckBox1 is Selected then I need to change the entry of all Textboxes(2-10) to be negative Value.
Works well right now but I need to identify all Textbox separately how could I bundle this up... even if a module is called...
So IF checkbox1 = True then textbox2 to textbox10 will = a negative value... If user adds 2 to textbox2 when the checkbox1 is = True then 2 will turn to -2
View 3 Replies
View Related
Dec 26, 2008
Could anyone please help me frame a vb code for the below explanation?
I have a sheet where in some terms are provided. Users have to open this sheet and check its description. After going through all the terms, they have to select the required terms using a checkbox given beside these terms. After checking the reqd. boxes, they would click on 'Submit' at the end of the sheet.
Once Submit is clicked, a new excel workbook should open up with the selected terms as various column headers.
View 10 Replies
View Related
Jan 23, 2010
I have a userform with a checkbox. If the box is checked, I would likke to write "Option One" to cell A1 in Sheet1 when the Close button is clicked. I can't get the code correct for this. The workbook is attached.
View 2 Replies
View Related
May 22, 2012
VBA Code
I would like to combine data into one cell based on check box selection. I have 25 check boxes all named CheckBox1, CheckBox2, etc...
The data will be placed in cell "Q10".
Checkbox 1 would use the data from "AL130"
Checkbox 2 would use the data from "AL131"
etc...
There could be any combination of Checkboxes selected.
Each selection must be separated by a comma.
View 2 Replies
View Related
Aug 29, 2008
I am trying to get an IF Statement created based off a checkbox answer.
I have a cell reference C2 from Checkbox that is answer Y.
If "Y" I want to calculate *0.005+0,0.03),0)*C4.
I need to skip the 1st & 2nd quarter after C4 before the calcautaion starts.
Then continuing no greater than .03 till the date changes.
I have tried to rearange this formula every way I can think of to get it to work like I want it to.
a correct formula for me to get this to calculate?
View 9 Replies
View Related
Oct 23, 2008
I am attempting to modify a spreadsheet so that it will enable a range on Sheet3 (I9:K42) if a check box is checked on Sheet2. If it is not checked, it will lock that range on Sheet 3 and grey (or gray, if you prefer) out that range.
View 9 Replies
View Related
Jul 19, 2006
When I click this button, a new row is inserted. Depending on whether this checkbox is checked, I want some of the formulas to adjust.
Public Sub AddEntry()
thisone = ActiveSheet. Name
FinalRow = Range("A65536").End(xlUp).Row
Range("A" & FinalRow + 1).Select
Selection.EntireRow.Insert 'just inserted a new row
x = Range("T1").Value
Sheets("Calculator").Select
Rows(x + 3).Select
Selection.Copy
Sheets(thisone).Select
Rows(FinalRow + 1).Select...........................
View 3 Replies
View Related
Jan 18, 2008
I want to write code for a Checkbox that when checked it fills a cell with a color, but if it is subsequently unchecked, the cell color disappears.
View 9 Replies
View Related
Jan 23, 2008
I have a Worksheet_Change event like the one below. When Checkbox1 is ticked the it subtracts and when it's not, it adds:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim intValue As Integer
If Not Intersect(Target, Range("W12:X24")) Is Nothing Then
intValue = CInt(Target.Value)
If CheckBox1.Value Then intValue = intValue * -1
Select Case Target
' Apples
Case Is = Range("W12")
Logbook.Show
Range("I10").Value = CInt(Range("I10").Value) + intValue
Case Is = Range("X12")........................
View 7 Replies
View Related
Mar 12, 2008
I have a checkbox and a command button on my sheet. I want that, depending if the checkbox is marked or not, I can call two different macros. I don't know if this is possible at all or maybe can be done easier otheriwise, but this would more or less be my idea of what should happen:
Private Sub CommandButton1_Click ()
' If CheckBox1 = marked
Call MacroA
'Else (CheckBox1 = unmarked)
Call MacroB
' End If
End Sub
View 4 Replies
View Related
Jun 4, 2008
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click()
Dim rClSkills As Range
Dim rClLookup As Range
Dim var1 As Integer
Dim iDecision As Integer
Set rClSkills = Range("TblClSkills")
Set rClLookup = Range("ClassLookup")
iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?")
If iDecision = vbYes Then
var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0)
If CboAppraise.Value = True Then.............................
View 6 Replies
View Related
Feb 25, 2009
married, widows, single checkbox is selected
macro solution
good work.
View 5 Replies
View Related
Jun 13, 2006
I would like to set up some option buttons so that the will be become visible and enabled when a check box is checked, and the opposite when the same checkbox is not check. This is my problem
Private Sub cbpDiscAlum_Click()
Dim myOption As Control
Dim myValue As Boolean
myValue = cbpDiscAlum.Value = True
If myValue = True Then
For Each myOption In pDiscounts.Controls
myOption.Visble = True
myOption.Enabled = True
Next myOption
Else
For Each myOption In pDiscounts.Controls
myOption.Visible = False
myOption.Enabled = False
Next myOption
End If
End Sub
It is the 5th command where it gets hung up: For Each myOption In pDiscounts.Controls. I am sure I am spelling both of the names correctly: the checkbox, and the group name.
View 3 Replies
View Related
