Return A1 Reference From Series Property
Feb 16, 2008
A common task for me is having to manually update the series formulas on charts to conform to some predefined conditions as the data changes. To reduce the strain of this, I've developed a VBA module that will read the various series A1-style formulas of the chart and update them according the the specific conditions. This works wonders on most charts, but I've suddenly run into a situation where Series.Formula property returns ONLY the R1C1 style. That is, where my series formula looks like this in the chart sheet formula bar: ...
View 6 Replies
ADVERTISEMENT
Jan 24, 2008
I need to build a formular in a cell that uses various columns in it's row such as: =A2+A4+A17+A24. In the past I've used simple number references to the columns (a is 1, b is 2,.....) I can't do tht though if I'm using a macro to automate the creation of a formula, right?
Is there a property I'm missing that will return the letter reference to the column instead of just the number as Activecell.column does?
My alternative is to write my own code to do this, but you know the bit about not reinventing the wheel....
View 9 Replies
View Related
May 14, 2006
I went through a lot of threads in this forum, although there were a couple relating to the same problem am facing, they didnt solve my error .. so here's my question again ..
When am trying to delink charts , i get an error stating "Unable to set the formula property of series class".
The code is as follows :
Sub DelinkChartData()
Dim iCtr As Integer, iChars As Integer, SH As Shape, iPlotOrder As Integer
Dim nPts As Long, iPts As Long 'Holds the total no of points in the chart
Dim xArray, yArray, sChtName As String, sSrsName As String
Dim xVals, yVals
Dim ChtSeries As Series ' var used to loop thru the series collection
Dim ws As Worksheet
Dim sChartType As String, iCtr1 As Integer
View 9 Replies
View Related
Dec 28, 2011
I made a macro to plot several line graphs on two axis (up to 5) side by side. I made the macro open up the files i need, and extract the necessary data into a common workbook. I put the common element, time as the x axis and heat as one y axis and pressure as the secondary axis. The source data on the excel worksheet is as follows:
(column A = time; column b = heat1; column c = pressure1, column d= heat2; and so on.
So when i have 3 workbooks i need to compare, it should have 6 lines. 3 sources work fine, but 2 sources gives me the "Unable to set the AxisGroup Property of the series class" error message.
Code:
Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1)).Select
Charts.Add
ActiveChart.ApplyCustomType ChartType:=xlBuiltIn, TypeName:= _
"Lines on 2 Axes"
ActiveChart.SetSourceData Source:=Sheets("Sheet1").Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1))
[Code]...
I don't get why it works for 3 but not 2 sources.
View 2 Replies
View Related
Feb 19, 2009
I'm trying to add the xvalues, but I get an error that says "Unable to set XValues property of Series Class"
Set buildSeries = ws.Cells(6, 2)
For k = 4 To Col Step 2
Set buildSeries = Union(buildSeries, ws.Cells(6, k))
Next k
ActiveChart.SeriesCollection(1).XValues = buildSeries
View 9 Replies
View Related
Jul 14, 2006
I am struggling with one problem. I am trying to change formulae of series in a chart using VBA code given below. But I am getting
'Runtime Error 1004, Unable to set the formula property of the series class'
ActiveChart.SeriesCollection(1).Formula = _
Replace(ActiveChart.SeriesCollection(1).Formula, "Sheet1", "test")
View 4 Replies
View Related
Sep 19, 2007
For the last day I have been getting the following error: "Run-time error '1004': Unable to set the Xvalues property of the series class."
The archetecture of the marco is sound being that I have used this methology in another macro and it works correctly every time. The XValuesand Values range are also correct and I know this because I had the macro select the data cells and it does this correctly as well. The data for simplicity at the moment has no empty cells or abnormal data. The data cells are all filled with some kind of data. For the XValue Range the data would look something like "2070087 4/27/2007" and the Values range is filled with a number between 0 and 100. What I can't figure out is why it crashes with a valid establish range. I highlighted the lines it crashes on in read, they are near the bottom.
Sub Proto1()
'
' Proto1 Macro
' Macro recorded 8/30/2007 by aaron.verellen
'
'
Dim CurrentSheet As String, ChartName As String
Dim RowCount As Integer, ColumnCount As Integer, FirstColumn As Integer, LastColumn, _
FirstRow As Integer, LastRow As Integer, Row As Integer, Column As Integer, _
ProductColumn As Integer, ArrayIndex As Integer, ParameterCount As Integer, _
ItemCount As Integer, MyIndex As Integer
Dim UserProductFlag As Boolean, NewProductFlag As Boolean
Dim Possibilities() As String
Dim ProductXRange As Range, ProductYRange As Range .................
View 9 Replies
View Related
Nov 19, 2009
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies
View Related
Jan 3, 2008
I am trying to create a chart that will allow the user to add/remove series to compare with each other. When adding a series, Excel gives it a name (e.g Series1) the macro is then set to rename it to a particular cell, however the name Excel gives the series varies depending on the order in which the series are added.
ActiveChart.SeriesCollection(SeriesCollection.Count)
instead of
ActiveChart.SeriesCollection(1)
would work collect the last series added, which is what I want, but when I apply this I get an run-time '424' error.
View 2 Replies
View Related
Sep 16, 2006
I have two obscure Files and I want certain information from each file.
I started by importing the data on seperate worksheets.
and I wanted to make a table basically summerizing the info on a third worksheet
On a third Worksheet i wanted to reference from those files in a table as i mentioned. So i started referencing the cells that contain the data for the first line and second line and i wanted to fill the series so I wouldn't have to type the info into Excel (like =C8)
uhm to summerize the following::
the two files are a players file (which has there specific team and player name) and a stats file (which has there corresponding stats). So i have the following
Year Team League GP G A Pts PIM +/-
2011-12 Swift Current Broncos WHL 82 5 22 27 128 10
the cell references are
for the stats worksheet
C8, D8, E8, J9, I9 (GP,G,A,PIM,+/-) Pts is just an add
and the next line would be 25 plus the cell references (so like C33)
i would like to fill it all the way down the page for about 1000 players
but it didn't work for me - the next line was C12, C27 etc...
View 11 Replies
View Related
Nov 30, 2007
I'm looking for a way to name lines in a pivot chart instead of default numbering eg ActiveChart.SeriesCollection(1). This in order to attach variable lines to y-axis no 2 no matter which selection is made in the pivot.
View 3 Replies
View Related
Aug 14, 2009
i need to write a formula that spits out the average of a series of numbers when (if):
every time "CAD" appears (column A) it takes the numerical figure of the cell directly to the right of it (column B). the data is arrange vertically, e.g., the range of "CAD"s is all vertical (column A), about 200 entries.
is there a formula/function that takes data from the columns completely adjacent to one another?
View 11 Replies
View Related
Mar 17, 2009
I'm having a problem with named ranges in a chart. I'm using Excel 2007 in Windows XP.
I have a line graph with twenty different series all using dynamic ranges. I created each series individually, typing the name and then the dynamic range I had previously defined. As far as I am aware, Excel demands when writing the reference that you specify which sheet/workbook this named range is from, so, given the scopes of my ranges are all 'workbook', I added the name of the workbook to the references.
e.g.
Series name:
Series1
Series values:
='workbook name'!range1
This seems to work fine, but when I save and then re-open the file, the dynamic ranges no longer work. If I go to Select Data and look at the reference for a series, it has been changed thus:
Series values:
=[0]!range1
View 2 Replies
View Related
Apr 23, 2008
I need to create a formula (not a VBA code as it is a shared spreadsheet) to bring up the next number in a sequence. For example
1
2
4
5
The outcome would be 3 as it is the first number that has not been used.
View 2 Replies
View Related
Nov 11, 2012
I am running Excel 2003 on a Win7 system.
Here is my situation:
Each of my data sets spans roughly 75 columns by 250 rows at present, but this could expand. The first 7 rows contain metadata. Columns 2-25 or so contain the raw data, from which everything to the right is calculated. The data sets have most columns in common, but not necessarily all.
In order to tease out the most meaningful information from my data, I frequently sort all or part of it based on varying criteria. When I find a useful sorting criterion, I create a new column with a header that describes the criterion and populate it with a formula that returns a 1 if the condition of interest is met for that row, or a 0 if it is not. For example, if I am doing this in column AA, I might enter
=--(AND($AX8>$AA$4,$Y8>0))
and copy it down to the end of the data. The resulting vector of 1s and 0s quickly re-identify data that meets that criterion even after subsequent resorting. It also makes locating data that meets multiple sorting criteria extremely simple. Essentially, I create a truth table.
Cell $AA$4 in the above example contains a "comparator" value I might wish to change at some point, which would change the subset of data the condition selects for.
Here's the first hard part:
For each data set, I need the ability to generate meaningful plots that includes separate series based on the criteria I have described. However, I also need to retain the ability to resort the data or change the comparator value without disrupting these plots. In other words, the plots must NOT change when the order of the data is changed, but MUST change to display the appropriate data when the comparator changes.
Here's the 2nd hard part:
Once I have this working for one data set, I need to be able to port it to other data sets (which are contained in other workbooks), so that I can compare equivalent plots from each. I also need to minimize the number of manual steps involved in doing so, to avoid human errors and excessive time consumption.
The only other possible complication I can think of at the moment is that, to this point, I have been inserting blank rows to isolate subsets that I do not wish to perform further sorting on from each other.
Right now I am angling toward VBA code that loops through the entire data set to generate base dynamic ranges using the column header row (row 1) as the names, and the entire column of data for the rangeloops through the truth table columns to generate "branch" row ranges for each of the sorting conditions,loops through the entire data set one more time to create "branch" ranges for each of the base ranges.
I could generate some code to accomplish a one-off solution for a given configuration of a single data set (provided there is not a list length limit in a chart series that I'd be violating)...but without a dynamic named range, I don't know how to get to something that would update appropriately. So in essence, I am still stuck at the dynamic range part of this.
View 1 Replies
View Related
Jun 9, 2006
I have a form with several combo boxes, and they function just the way I like as far as being able to pick from the list, or typing in them and having it show you the next available item in the list as you add letters. Whats happening that I would like to know how to deal with is... as soon as you type a letter that is not in my lookup range it generates an error. "Could not get the list property - Invalid property array index". I don't want people to be able to add to the list, but I would like a msgbox to pop up. Then allow them to go back to the box and try again.
View 2 Replies
View Related
Jul 21, 2014
NumberABC D Value to be returned
1 -10050 0 C
2 156.6700-31.34A
3 104.5800-20.92A
4 -6.2000 #NA
5 0 -3500 #NA
6 132.800-33.2 A
7 0 1000-50 B
What formula i need to apply so that i get values which are in column "Value to be returned"
View 6 Replies
View Related
Jun 15, 2013
In sheet2 I've many numeric value.
In sheet1, A1: =Sheet2!B12 which returns 0 (zero) though B12 of sheet2 is the result of =sum(B1:B11) i.e 660. But if in sheet1 A1=Sheet2!D12 or any other cell in sheet2 instead of B12, A1 gives correct result. That means cell A1 itself is not a problem. I checked format of B12 which is number format.
View 5 Replies
View Related
Nov 11, 2008
i am trying to write some code to analyse a weightlifting movement that occurs 3 times. In particular there is a part of the macro where the user will input the start and end time of the movement using input boxes (to only select relevant data).
I want to then use a vlookup function to search for the start and end times in a range (1 column) in the time range and return the cell reference of these so i can select only these values and either create a graph or do more analysis. My code for this particular part so far looks like:
View 3 Replies
View Related
Mar 3, 2014
I'm trying to lookup two dates in a column in order to provide the start and end point of an array for use in the PERCENTILE.INC function.
I can't quite get it working, my base idea is something like;
PERCENTILE.INC(INDEX(A1:A10,MATCH(C1,B1:B10,0))&":"&INDEX(A1:A10,MATCH(D1,B1:B10,0)),0.95)
So this looks for the dates found in C1 and D1, finds them in B1:B10, and returns the corresponding cells in A1:A10 for the array part of the PERCENTILE syntax.
I think the issue is that the lookup will return the value in A1:A10 rather than using the cell reference for the PERCENTILE.INC function...
View 4 Replies
View Related
Jun 16, 2006
I have a column of data in column and a column of data in column F. The data in column F is exactly the same as column C but in a different order. Is there a way to match column C to Column F and return the matching cell references for column C & F in column G & H? i.e. If the word Help appears in C27 and F40, match the two words and return C27 in G27 AND F40 IN H27. All of the values are unique (I hope).
View 2 Replies
View Related
Oct 20, 2006
how I would go about referencing a cell on another worksheet to return only the last so many characters from the data in that cell. EG:
Sheet 1 cell A3 contains the number (stored as text) 12345678
Sheet 1 cell A4 contains the number (stored as text) 98765432
On Sheet 2 I want to put into cell B2 5678 (the last four characters from the data in Sheet 1 A3.) Also on Sheet 2 I want to put into cell B3 5432.
View 2 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Jul 23, 2008
I am creating a summary financial sheet in Excel 2003, Win XP. It needs to show the top 10 sales variances from a large data list, along with the associated department.
I can bring in the top 10 largest variances using Large(array,k), but because variances are either positive or negative, I'm not really showing the true top 10. To fix this I can use absolute values via Large(abs(array),k) but then I don't know how to convert the value back to its original sign (positive or negative).
If I could somehow get the cell reference that the Large(abs(array),k) formula points to, I could do something like this:
=Large(abs(array),k) * (Large Cell Reference/Large Cell Reference)
I'm afraid to use the address function because of duplicate sales variances. I often have several variances of with same value, so I might not truly be pulling the address that the large(abs(array),k) is pointing to.
View 9 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Dec 13, 2006
i just want to use vlookup and hlookup to give me the row and column headings for 30 to 40 sesor at a time.... but i keep getting #n/a whenever the functions meet a table of more than one column! (reduced workbook attached)
it should surely be simple to get this data - but i've struggled to no avail. I thought that having the four separate worksheets was the problem - but i haven't had any look even when i dump the data into a single worksheet!
i basically just want excel to return the cell reference of a sensor number which exists in a table. sometimes a sensor can appear more than once, but its not very common and i could happily work around that by doing the manual search (ctrl f, find all).
any advice would be very much appreciated, i'm struggling and the number of sensors i need to test will increase in the coming months.. please help!
should i even be using vlookup and hlookup? ive tried all the other excel functions, but they don't seem to be useful?
View 8 Replies
View Related
Apr 14, 2007
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select
View 2 Replies
View Related
