I would like to find the blanks within a column. Using the available cell values above and below compute a sort of linear function then, using that linear function fill in the blanks in between. So the values are linearly increasing or decreasing (whatever the case maybe) to the next available nonblank cell value. spreadsheet attached.

I have a long list of numbers (1 to around 3000) in Column A and I need to print out only the numbers missing from that list. The numbers are sequential (except the ones missing) and there are no blank or missing cells, only missing numbers.

EXAMPLE:

1 2 4 5 7 .....

So I would only need to print the number 3 and 6. - it can be all in one cell, or in one column, it doesnt matter.

I have a userform which saves its info to a spreadsheet. what i want to do is to also open a new workbook, save the same info to the new workbook, copy and paste from existing spreadsheet will do instead of linking the userform to a different workbook (i can do all this) I then want to save the workbook in a specific folder(folderA) but named by the next number ie workbooks 1, 2, 3, 4, 5, 6, 7, 8 etc exist so the next workbook should be called 9 so I need some code to look for the names of existing workbooks in the folder and determine the next. Then I want a spreadsheet to at a pre-set interval(15 minutes) open each workbook , copy the line to the next blank row and move the workbook to a second folder(folderB). The folders A & B will only contain these workbooks.

i got worksheet which i store a list of all filing number in the same Col "R"

The combination of Filing Number Example

1) Invoice Filing Number = Inv2014070001 and continual 2) Purchase Order Filing Number = POD2014070001 and continual 3) Sublet Filing Number = SLT2014070001 and continual

Currently i am using a code which it can find the last filing number return to my userform textbox and increase the last number by 1. but this code can only return the very last filing number.

i need to find all the missing filing number in between all the filing number in Col R and return it to my userform listbox

VB:

If me.Remark.Value = "Sales" Then A = "Inv" If me.Remark.Value = "Purchase" Then A = "POD" If me.Remark.Value = "Sublet" Then A = "SLT" Y = Me.TransYear.Value myName = UCase(A & Y)

I would like a flexible Formula to Return the Column Number of individual Numeric Labels and their Numeric Value. I have a 2-Row by many Columns chart/ grid layout. My 1st Column, Column Number "1" is Excel Column Letter "F".

Numeric Label 17 is housed in Column Number "12" per my chart , its Numeric Value 5 is housed on the next Row - directly below the Numeric Label.

Sample Data: ...

Scenario:

To Return the correct Column Number: locate the Numeric Label 17 and its Numeric Value on the Row below, Numeric Value is 5. The Numeric Value is to be increased by a Value of 1 (one) - NEW Numeric Value = 6. The Column Number Returned should reflect Numeric Label of 17 remains the same but the Numeric Value is increased by one.

To Return a Column Number representing the Numeric Label 17 and its original Numeric Value +1 (plus one): the Numeric Label is still 17 but the Numeric Value is NOW 6. From the oringal Column Number that housed Numeric Label 17, that is Column Number "12", SEARCH in Ascending order: moving LEFT from Column Number "12" and using the Numeric Value as the 1st (first) search order and the Numeric Label as the 2nd (second) Ascending search order. SEARCH the Numeric Value Row until the first Numeric Value either equal to 6 or more than 6 is found. Then Return the Column Number of the Column to the Right of that Numeric Value.

Required Result:

Return the Column Number based on the Numeric Label 17 and the NEW Numeric Value of 6, search in Ascending order - First search order based on Numeric Value 6 - Second search order based on Numeric Label 17.

Using a Dynamic Named Range "Data", I would like a Formula to return the Row Number of the "LAST" instance of a duplicate numeric value - repeating twice consecutively in the same column.

i have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.

I am currently using MS Excel 2007. Is there a way in VBA to automatically insert missing columns based on a defined series or range of values?

For example, we have a report that displays columns of: Year 2004 to Year 2012 per column (9 columns in total). Sometimes, it displays missing a year or years (thus; our report has less columns). For example, it only shows 2008 to 2012 (missing 2004 to 2007). At times, it misses some years in between. What we do is manually add those missing years by manually inserting columns then inputting the missing year as their column headers.

Is it posisble for VBA to check if the columns contain all of the defined Year range (for example, you've initially defined: Year 2004 to Year 2012)? Afterwards, all missing columns are automoatically inserted (in chronological order or based on your defined values or range).

In a column, I have a repeating series of 24 different strings corresponding to the hours in a day. The strings are formatted as: 0, 10000, 20000, ... , 24000. Some days do not contain a complete series. What I would like to do is to complete each partial series by inserting a row with the proper hour string and zero's in adjacent cells.

In have a worksheet with about 5,000 rows. In column there is a unique identifier for each row, however the unique identifier can take one of 12 different formats, namely:

L1314LAND00001 through to L1314LAND0XXXX L1314CUST00001 through to L1314CUST0XXXX L1314COMM00001 through to L1314COMM0XXXX

M1314LAND00001 through to M1314LAND0XXXX M1314CUST00001 through to M1314CUST0XXXX M1314COMM00001 through to M1314COMM0XXXX

N1314LAND00001 through to N1314LAND0XXXX N1314CUST00001 through to N1314CUST0XXXX N1314COMM00001 through to N1314COMM0XXXX

S1314LAND00001 through to S1314LAND0XXXX S1314CUST00001 through to S1314CUST0XXXX S1314COMM00001 through to S1314COMM0XXXX

These unique identifiers won't always appear in sequentiual order. In Cells B2 to M2, I want to be able to determine what the next entry for each of the twelve variations will be, so for example, if the current highest value in column A for the 'S1314LAND' range S131400421, in cell K2, I would want it to display S1314LAND00422, and if the current highest value in column A for the 'M1314CUST' range M1314CUST0036, I would want cell C2 to display M1314CUST0037, so anyone at a glance can see the next highest unique reference for the relevant set, rather than having to go through the unique identifiers in column A manually to determine the next entry in the series.

I'm not really sure where to start, when there can be more than one aplhanumeric entries ending in the same number, e.g. S1314CUST00500 and M1314LAND00500.

I have been trying to create a userform that will generate a numerical list starting in a given cell using a starting number, an ending number, and an increment that the user will imput into a textbox. I have a userform set up, but I do not know how to do any coding. I have very little experience with excel.

I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.

If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)

But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.

After the data is plotted it is the code below that gets the error:

I have a small sheet that has a number in Column A and a larger number in Column B along with some data in Columns C and D. I wish to make a separate sheet that has rows numbered using the numerical range from Column A and Column B along with the data from Columns C & D

I have a list of numbers in sequential order. There are numbers missing. Is there a way to have Excel insert rows for the numbers that are missing in the series.

Is there formula that I can use that would have Excel count the numbers in a colum and return the numbers that are missing, 1,2,3,5,6,7,9,10 and excel returns 4,8?

I have this issue and I can´t find the solution . I need to have sometihng that copies only the last ( cell in the right) non-zero cell and past in the same row. This macro or VBA code needs to search the row, and paste in a column the value of the last cell in the right. The sheet I´m working have lots of rows and lots of columns. The columns are dates. And I need to have just a column in the end with the most recent data of each row.

I want to ask that I have got a workbook with different number series i want user form where i can enter its start number and end number and then it finds and delete shift cells up said series number i have entered in user form please see mentioned below example.

Series 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 and i want to delete 1 to 5 numbers delete to shift cells up.

I have one Row that houses numbers 80-90 in seperate cells (11 columns A20: K20) - these are my Numeric Labels.

I then have several other Rows that span the same number of columns as the Numeric Labels (A21:K100) and house Numeric Values that relate to the Numeric Labels.

I would like to AVERAGE the Numeric Values in each Row and have a Numeric Label (value) that corresponds to the calculated average returned as the result.

Scenario: Looking for Numeric Reference 8, the relevant Numeric Labels are 20, 22 and 26. Their respective Numeric Values are 145, 120 and 160. The Numeric Label with the lowest value of 120 is 22.

I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".

Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.

I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.

A common task for me is having to manually update the series formulas on charts to conform to some predefined conditions as the data changes. To reduce the strain of this, I've developed a VBA module that will read the various series A1-style formulas of the chart and update them according the the specific conditions. This works wonders on most charts, but I've suddenly run into a situation where Series.Formula property returns ONLY the R1C1 style. That is, where my series formula looks like this in the chart sheet formula bar: ...

Is there a formula to look in multiple arrays and return whatever it finds i.e. text or numeric values?

Sheet1 Â ABCDEFGH1Cat0Â CatFiveÂ Donkey32Â Â Â Mouse2Â Wolf43Â 4WolfFourÂ CatFiveÂ Donkey35Â Â Â Mouse2Â WolfFourSpreadsheet FormulasCellFormulaB1=LOOKUP(9.99999999999999E+307,CHOOSE({1,2,3},0,VLOOKUP(A1,$D$1:$E$2,2,0), VLOOKUP(A1,$G$1:$H$2,2,0)))B4=LOOKUP(REPT("z",255),CHOOSE({1,2,3},0, VLOOKUP(A4,$D$4:$E$5,2,0),VLOOKUP(A4,$G$4:$H$5,2,0)))

We recently bought some new software at work, and I'm having trouble formatting the exported data in a way that will work with existing reports. The attached file is what the data looks like after being exported. Basically, what I'm trying to do is insert rows for the missing numbers -- i.e., each name should be followed by rows numbered 1 through 10.

John Smith John Smith 1 1 4 2 8 3 4 5 6 7 8 9 10

My ultimate end goal is to have columns of data for each name, instead of rows:

John Smith 1 2 3 4 5 6 7 8 9 10

I've created a formula that can do that part, but it operates on the assumption that each name will be followed by a set number of rows.

What little I know about vba I've learned on my own, so I may just be missing something obvious.

Hi guys/gurls.. is there a way i can get the following check against range for orders which give result as invoiced(if within the range), duplicated(if 2 or more than 2 are on the orders list) & missing (which on not in the orders when checked against the range).

i have two chart A and chart B from ,chart A got nine repeting numbers and Chart B will show what is the number not in chart A or is outside from this number 0.1.2.3.4.5.6.7.8.9. i want auto generate to chart B.

I need a formula in column d that will return all the missing values between for example b1 and c2 and b21 and c21. The catch is that the numbers in column b and c can be anywhere but row b will always have the starting number and next to that cell the ending number in column d.

a further condition is that it must only calculate the missing number if the value in column a=1. if it is blank than nothing must be calculated.