I have this issue and I can´t find the solution .
I need to have sometihng that copies only the last ( cell in the right) non-zero cell and past in the same row.
This macro or VBA code needs to search the row, and paste in a column the value of the last cell in the right.
The sheet I´m working have lots of rows and lots of columns. The columns are dates. And I need to have just a column in the end with the most recent data of each row.
I have one Row that houses numbers 80-90 in seperate cells (11 columns A20: K20) - these are my Numeric Labels.
I then have several other Rows that span the same number of columns as the Numeric Labels (A21:K100) and house Numeric Values that relate to the Numeric Labels.
I would like to AVERAGE the Numeric Values in each Row and have a Numeric Label (value) that corresponds to the calculated average returned as the result.
Scenario: Looking for Numeric Reference 8, the relevant Numeric Labels are 20, 22 and 26. Their respective Numeric Values are 145, 120 and 160. The Numeric Label with the lowest value of 120 is 22.
I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".
Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.
I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.
I would like a flexible Formula to Return the Column Number of individual Numeric Labels and their Numeric Value. I have a 2-Row by many Columns chart/ grid layout. My 1st Column, Column Number "1" is Excel Column Letter "F".
Numeric Label 17 is housed in Column Number "12" per my chart , its Numeric Value 5 is housed on the next Row - directly below the Numeric Label.
Sample Data: ...
Scenario:
To Return the correct Column Number: locate the Numeric Label 17 and its Numeric Value on the Row below, Numeric Value is 5. The Numeric Value is to be increased by a Value of 1 (one) - NEW Numeric Value = 6. The Column Number Returned should reflect Numeric Label of 17 remains the same but the Numeric Value is increased by one.
To Return a Column Number representing the Numeric Label 17 and its original Numeric Value +1 (plus one): the Numeric Label is still 17 but the Numeric Value is NOW 6. From the oringal Column Number that housed Numeric Label 17, that is Column Number "12", SEARCH in Ascending order: moving LEFT from Column Number "12" and using the Numeric Value as the 1st (first) search order and the Numeric Label as the 2nd (second) Ascending search order. SEARCH the Numeric Value Row until the first Numeric Value either equal to 6 or more than 6 is found. Then Return the Column Number of the Column to the Right of that Numeric Value.
Required Result:
Return the Column Number based on the Numeric Label 17 and the NEW Numeric Value of 6, search in Ascending order - First search order based on Numeric Value 6 - Second search order based on Numeric Label 17.
Using a Dynamic Named Range "Data", I would like a Formula to return the Row Number of the "LAST" instance of a duplicate numeric value - repeating twice consecutively in the same column.
Is there a formula to look in multiple arrays and return whatever it finds i.e. text or numeric values?
Sheet1  ABCDEFGH1Cat0 CatFive Donkey32   Mouse2 Wolf43 4WolfFour CatFive Donkey35   Mouse2 WolfFourSpreadsheet FormulasCellFormulaB1=LOOKUP(9.99999999999999E+307,CHOOSE({1,2,3},0,VLOOKUP(A1,$D$1:$E$2,2,0), VLOOKUP(A1,$G$1:$H$2,2,0)))B4=LOOKUP(REPT("z",255),CHOOSE({1,2,3},0, VLOOKUP(A4,$D$4:$E$5,2,0),VLOOKUP(A4,$G$4:$H$5,2,0)))
I am trying to do is extract the volume size of products in 'ml' from 10k plus products from a description field cell. this description field could also contain the weight of the product in grams so I cannot just do a search for a numeric string , it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I require a Formula to calculate the INTERVALS (the number of Rows between the LAST instance and the PREVIOUS instance in a column) between each individual occurrence of any designated PAIR of Numeric values (single-digit / double-digit) in the same Row of the Named Range "Results" and return each calculated INTERVAL result to a separate Column on the same Row of a New Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the INTERVAL by calculating the number of Rows between the LAST instance and the PREVIOUS instance in a column - locate when both Numeric values LAST appeared together and Count back to their PREVIOUS appearance together to get the required Count; i.e. count from the Row ABOVE LAST appearance to the Row BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion vertically and horizontally and they are referenced using the horizontal and vertical cell address that houses each criterion, and the results are returned across the Row of the intercept of the vertical and horizontal criterion. At some point both criterion values being referenced will be the same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout: Cell Ref. A2 and B1 criterion 80 and 80 Cell Ref. A3 and B1 criterion 81 and 80 Cell Ref. A4 and B1 criterion 82 and 80
I have a column of several thousand entries listed as numeric with a scientific symbol eg.
1.4mSv 19.53mSv/1mSv (some have a mix and or alpha/numeric range)
I want to convert them to the numeric value only. I'm extracting to a chart which is not recognising the alpha and throwing the data out. I tried find and replace, trying various options within the 'replace format' tab with no joy.
I have a few thousand products codes (i.e ABCD123BLA08 or SHU267BLA) They are non standardised in length or structure. I wish to pull out everything upto the end of the third numeric digit.( ie ABCD123 and SHU267) I cannot use left as they are all different lengths. Ideally i would serach for a non numeric char after the number then use left up to that point. Search can't do this, FIND can't do this.
Summary ABCD123BLA08 would be ABCD123 SHU246BLU would be SHU246 I147ORT08-12 would be I147
19352510 C084111X AA 24253081 A001290U AA 19599291 48413321
I want to write an If Statement is a column next to each entry that denotes two options either Broker or Agent. Where the code is say 19352510 then Broker and where it is say C084111X AA then Agent.
Broker codes will never contain a letter. The Agent code will always start and finish with a letter.
Given 5 rows in column A, I have strings that has the word 'Qty' and some none. For any string that has the word 'Qty', I want the numeric value before it. For string that doesn't have the word 'Qty', I want it to be 1. My question is, how should I added the numeric string without a helper column?
Column A Desired Qty to Take
some string name and ended with (4 Qty) 4
some string name without the word Qty 1
[code]....
In the above example, I would like to have an answer in say cell B1 to be 15
IDMacro Out Put X11891189 cdecde CONFRCONFR 175175 D0101101
I ahve a sheet having two column one is "ID" and other is "Macro Out Put" as shown above , is that possible with VBA code that it give the same result as i shown above in column "Macro Out Put". for reference i also attch the file
I am using this formula: =INDEX(A5:Z5,MATCH(9.99999999999999E+307,A5:Z5)).
All the cells in the range A5:Z5 contain SUM formulas for adjoining cells in rows 1 to 4. The above INDEX formula doesn't work in this situation because many of the formulas in row 5 return a 0 value because there is no data in rows 1 to 4. If I delete the formula from all these cells, the INDEX function works OK, but I'd rather not do this.
Is it possible to amend this formula so that it returns that last numeric value >0?
on the extreme left column, i have 23 numbers from A1:A23. All 23 numbers are in the form of 4 digit. For example A1 there is 1234, i need to display the possible 3 digit combination of this in the same row (like say 123,124,234,134 in B1,C1,D1 AND E1).
Another example in A2 there is 3545, i need to display 354,455,355 in the same row in B2,C2,D2
I need to perform this operation for the 23 numbers on the extreme left row. Can give me some hint on the code.
I have some data fields (in yrs and days) as follows:
a = 5y020d b = 2y225d c = 12y003d
I need to add these three data items together in VBA to get a total yrs and days. The answer is then returned to an excel worksheet (sheet 1)
I have tried this:
a = LEFT (a, 1)
b = LEFT (b, 1)
this gives me the 5 and the 2 for the yrs but I am not sure how to get the days (20 and 225)
also, if I try and sum, i.e. a + b and then return to the spreadsheet i get 52 as the answer rather than 7 which is the answer i need. How can i convert this in the VBA correctly.
in excel when im writing a vba macro is thier something that i specify to only find numerical, or only find alpha characters? what about in excel when im doing a odbc query?
I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm‎
I have a dynamic worksheet containing a variable number of rows that I would like to have automatically numbered when I run my VBA script. I used Dave Hawley's code as follows, with a modification to begin at cell A2, but it doesn't seem to work, as it only numbers cell A2 and not the rest.
VB: With Range("A2") .Value = 1 .AutoFill .Range("A2:A" & RowTotal), xlLinearTrend .Range("A" & RowTotal + 1).Clear End With
RowTotal is just a variable that holds the results of a simple last row finder. How to make this work?
Looking at one row and finding the last numeric entry has defeated me, I've attached a sample sheet which clearly shows the rows and and what/where to display the results ...
I have a sheet (example attached) I need a formula to recognise only the numeric values either by automatically deleting the words or by entering the numbers in another corresponding sheet, either would do.
In a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.