Count Intervals Of 2 Numeric Values In Same Row And Return Count Across Row
Sep 23, 2005
I require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
View 12 Replies
ADVERTISEMENT
May 5, 2008
I will say exactly what i want.
I want to keep statistics of roulette.
More specifically, i want to count how many times a dozen lates to come.
The range from 1-12 is 1st dozen, from 13-24 is the 2nd and 25-36 is the 3rd.
I want to count among these numbers, how many times one of three dozens appear every 1 time, how many times appears every 2 times, .... until 20 times.
For example: I have put in a column 500 numbers from 0 to 36.
The output must be like this:
1st Dozen: Every 1 time: x
Every 2 times: n
Every 20 times: m
The same for 2nd and 3rd dozen.
View 9 Replies
View Related
Jun 11, 2013
I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
View 3 Replies
View Related
Apr 24, 2006
I have a workbook consisting of 4 columns where we log reported errors: Workbook1.xls DateNormalRelease Key Account Customer ID
Columns B and C have either a value of 1 or 0 at the date stated in A.
Column D is filled in only if the customer is a Key Account.
I also have a workbook where we manually inserts data from above workbook, amongst others; This workbook consists of 12 worksheets (one for each month)and includes these columns: Workbook2.xlsCustomer NameKey Account Customer ID Total Number of OrdersReported Errors. Is there a way to fetch all reported errors regarding a certain customer within a date interval and insert the value into column D?
View 3 Replies
View Related
Nov 20, 2006
Office 2003 with Windows XP
This is my first post so i may not have done everything correctly. I tried doing google searches to see if anyone else has done something similar but its a tricky thing to search for. I have found pages dealing with manipulating time but none seem to be what I want
I have an Excel sheet with data
A1=date
b1=source
C1-h1 all contain data (name, location, etc, etc) but I am not interested in those.
A1 (the date cell) is formatted like: m/d/yyyy" "h:mm:ss AM/PM
[Sample]
a2 = 8/1/2006 12:20:23 AM b2 = phone
a3 = 8/1/2006 12:21:13 AM b3 = email
a4 = 8/1/2006 12:33:03 AM b4 = phone
This is what I am trying to accomplish:
I want to break each hour, whether it contains data or not and get a count of the different types of source
my desired output would be:
time Phone email
12:00AM
to 2 3
12:30AM
My problem occurs because I am unsure how to break the times down into intervals. In my head, I would create a new column and try to break the time up into an interval. So for a2 (8/1/2006 12:20:23 AM), I think I would need to break the date and time up and then determine which interval would be needed based on the time.
I was going to perform the following:
=text(a2, "h" + if("mm:ss">30, 30,00)
Basically, pull the hour from a2 and evaluate the mins/secs.
If the min/sec is bigger than 30, put a 30 in the box. Less than 30, put double zero in the box. So for 8/1/2006 12:20:23 AM, b2 would have 12:00 since it falls in the 12 to 12:30 interval.
Once I have all the intervals, I would also need to preform a count on the source cell but I think I can use a vlookup to get the count for the interval.
View 9 Replies
View Related
Jan 20, 2014
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
View 2 Replies
View Related
Dec 11, 2009
I have a spreadsheet with two different rating scales (People & Business) that have a value of 1-5 per person. From this I created another column 'Sorter' that gives a person a single value of 1-25 (5*5 possibilities from the two rating scales.) I am trying to place people into a table based off of the column 'Sorter' as shown in columns U-Y. The real table cleaned up is in the table tab.
View 5 Replies
View Related
Dec 29, 2007
I am trying to total the number of cells in a column that are 0 or greater but less than 365. I use countif for for a specific digit but cannot compute a conditional range using it. I need to count the number of positive digits btwn 0 and 365. The column is a computation of the difference btwn today and past and future dates. A plus digit means we missed sevice and better be ready for an angry customer.
View 3 Replies
View Related
Jan 15, 2008
I have several cells that are either positive or negative values and the values are expressed in percentages. I'd like to know how many of the cells are over/under certain percentages. For instance, how many of the cells are over negative or positive 2%? I've tried the COUNTIF function using 2%, 4% and so on, but I always get back the same cell count regardless of the criteria I use.
View 7 Replies
View Related
Jul 13, 2012
I'm working on spreadsheet where I have to match the data on two columns, and then count how many times that same number appears on both columns (see below table) In this below sample, I should get total of 3. (23654 , 12345 and 57963).
A
B
12345
23654
67891
12345
57963
11111
23654
57963
56954
77777
View 4 Replies
View Related
Jan 29, 2010
I know different variations of this question get asked all the time... but I can't find an answer that I'm sure will *always* do what I want.
I have a range of cells (A1:A10), and I want to count all the text entries of positive length. That is to say, I don't want to count:
blanks
numbers
zeros
spaces
errors
I'm sure I need to use the LEN function, but I can't quite figure out how.
this counting expression will be inserted in a SUMPRODUCT formula
View 10 Replies
View Related
Dec 17, 2009
Is there formula that I can use that would have Excel count the numbers in a colum and return the numbers that are missing, 1,2,3,5,6,7,9,10 and excel returns 4,8?
View 2 Replies
View Related
Nov 3, 2008
I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.
I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?
View 6 Replies
View Related
Mar 19, 2012
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
View 1 Replies
View Related
Nov 17, 2007
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
View 2 Replies
View Related
Aug 7, 2013
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
View 9 Replies
View Related
Jan 20, 2008
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
View 9 Replies
View Related
Aug 21, 2006
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies
View Related
Jan 16, 2013
I want to work out how many cells in a colums are "equal to or more than AND less than or equal to" certain date ranges.
E.G. Column A has random dates from 01/10/2012 to 31/12/2012. I want to know how many of these cells have dates that meet the criteria of >=01/12/2012 and <=31/12/2012.
I have searched on here and found COUNTIF which didn't work. I also tried DCOUNT which I couldn't get to work.
View 2 Replies
View Related
Feb 9, 2012
I am trying to search text cells to return a word count within a particular row of cells and I am currently using the following formula:
=COUNTIF($D4669:$EI4669,$O$3), where cell o3 contains the word to search and $D4669:$EI4669 the data.
However, this formula misses data that contains characters such as "," etc.
View 9 Replies
View Related
Jul 16, 2013
I have data in range A2:E5000. Column D contains cost centers entered by users.
I also have a list of valid cost centers in range K1:K10.
What would be the vba code to check and return the count of the items entered in column D which are not valid, based on the list in range K1:K10?
View 1 Replies
View Related
Dec 21, 2007
I have tried and tried to get the VBA code working that will tell me the number of visible rows in an autofiltered set of data, but the result I seem to be getting is always "1". Below is the most simple form of the code that I am using (it is based on previous posts and tutorials on this site). (I have also attached a workbook with sample data and the code)
With ActiveSheet
Set rnData = .UsedRange
With rnData
. AutoFilter Field:=1, Criteria1:="5"
.Select 'demonstrate that the rnData range is valid
lcount = .SpecialCells(xlCellTypeVisible).Rows.Count
End With
End With
View 5 Replies
View Related
Mar 2, 2014
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
View 3 Replies
View Related
Apr 15, 2014
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies
View Related
Mar 26, 2009
I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
View 2 Replies
View Related
Jun 22, 2009
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
View 2 Replies
View Related
Feb 5, 2010
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies
View Related
Jul 1, 2014
VBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies
View Related
Mar 7, 2012
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
View 5 Replies
View Related
Oct 19, 2009
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
View 9 Replies
View Related