Using a Dynamic Named Range "Data", I would like a Formula to return the Row
Number of the "LAST" instance of a duplicate numeric value - repeating twice
consecutively in the same column.
I would like a flexible Formula to Return the Column Number of individual
Numeric Labels and their Numeric Value. I have a 2-Row by many Columns
chart/ grid layout. My 1st Column, Column Number "1" is Excel Column Letter
"F".
Numeric Label 17 is housed in Column Number "12" per my chart , its Numeric
Value 5 is housed on the next Row - directly below the Numeric Label.
Sample Data: ...
Scenario:
To Return the correct Column Number: locate the Numeric Label 17 and its
Numeric Value on the Row below, Numeric Value is 5. The Numeric Value is to
be increased by a Value of 1 (one) - NEW Numeric Value = 6. The Column
Number Returned should reflect Numeric Label of 17 remains the same but the
Numeric Value is increased by one.
To Return a Column Number representing the Numeric Label 17 and its original
Numeric Value +1 (plus one): the Numeric Label is still 17 but the Numeric
Value is NOW 6. From the oringal Column Number that housed Numeric Label 17,
that is Column Number "12", SEARCH in Ascending order: moving LEFT from
Column Number "12" and using the Numeric Value as the 1st (first) search
order and the Numeric Label as the 2nd (second) Ascending search order.
SEARCH the Numeric Value Row until the first Numeric Value either equal to 6
or more than 6 is found. Then Return the Column Number of the Column to the
Right of that Numeric Value.
Required Result:
Return the Column Number based on the Numeric Label 17 and the NEW Numeric
Value of 6, search in Ascending order - First search order based on Numeric
Value 6 - Second search order based on Numeric Label 17.
Returned Result should be Column Number 10.
I have a range of say B1:Z2. In row B1:Z1 I have dates in the format dd-mmm-yy. In row B2:Z2 I indicate presence of a person by "P". This is at infrequent appearance i.e. p,p,p,blank,blank,blank,p,p,p,p,p,blank,blank,p,p,blank,p,p,p, etc. I am trying to find or workout a formula that would find the most repetitive Ps in row B2:Z2 and give me the sum thereof. I.e, from the above example it should be 5. It does not have to count specifically P. Something that counts the most non-blank sequence of cells in the range should also do.
View 8 Replies View RelatedI have to create 1000 dynamic ranges and do not want to do this manually. See the list below for the syntax I am using, I am only showing the first 10.
Name Range
KPI_01=OFFSET(Date,0,1)
KPI_02=OFFSET(Date,0,2)
KPI_03=OFFSET(Date,0,3)
KPI_04=OFFSET(Date,0,4)
KPI_05=OFFSET(Date,0,5)
KPI_06=OFFSET(Date,0,6)
KPI_07=OFFSET(Date,0,7)
KPI_08=OFFSET(Date,0,8)
KPI_09=OFFSET(Date,0,9)
KPI_10=OFFSET(Date,0,10)
I have tried the following code which works to an extent...
Range("=OFFSET(Date,0,1)").Name = "KPI_01"
..but the final result of the named range is an actual range, i.e. "A1:A13".
How can I keep the named range as a dynamic range?
Is there a function in Excel that allows you to combine non-numeric columns as a list?
For example, 91401 is a zip shared by three cities: Van Nuys, Sherman Oaks and Valley Glen.
The data is in a workbook as three rows (each with 91401 as the first column, and cities listed individually:
91401 Van Nuys
91401 Sherman Oaks
91401 Valley Glen
I am eventually wanting to do a v-lookup with the zip, but the duplication is causing problems. I want the associated cities listed, but only want one row. The cities could be listed, separated by commas (preferably), like below:
91401 Van Nuys, Sherman Oaks, Valley Glen
The list of zips I have is several thousand long, so it's not practical for me to do it manually. Is there a "pivot table" of text that I could use?
I need to create a formula (not a VBA code as it is a shared spreadsheet) to bring up the next number in a sequence. For example
1
2
4
5
The outcome would be 3 as it is the first number that has not been used.
What I am trying to is to count the number of times a certain number or character appears (either on its own or in a batch of consecutive cells containing that number/character) in a column.An example might clarify things (for reasons of brevity I will write the columns in rows):
If a column looks like (each 1-digit numbers / characters being a consecutive cell) 0 0 X X 0 0 X and I am counting for X, then I should get 2. If my column is X X 0 X X 0 X 0 0, then I should get 3. If my column is 0 X X 0 0 X 0 then I should get 2. If my column is X X 0 X X 0 X then I should get 3. Is there a formula to perform that calculation?
I would like to " Validate Data In A Vertical Column To Not Allow Non Consecutive Numbers Less Than 100"
756415
10
456132
7
456123
12
The above is a valid list. Below would be an invalid list:
756415
10
13
456132
7
7
456123
12
13
This part of a larger scope, but I have a macro that will crash if the data entered is entered by way of the invalid list, it works perfectly with the valid list. I am limited to one column user's will input the data via a Barcode scanner that after it recieves input it enter's a "Hard" return. This is a warehouse pickticket program, user's scan their ticket id's (numbers greater than 100000) and then the number of lines on the ticket (usually not greater than 15)
I have sent a data sheet template to my client in which they paste their data, based on this data sheet analysis will be done automatically in next sheet "Summary".
Whenever they paste product code, vlookup is not working since the product code contains few are numeric (shows: "Number Stored as Text"). I advised my client to go with "Text to Column" and "Delimited" to change it as numeric. But my client feels this method is tedious one. Is there any alternate way to make that column as numeric permanently?
I understand filtering will accomplish this but a macro would save time.
My data is in Column "B" that contains ID#. If there is a duplicate ID# in column B, delete the row, but keep one. In addition, I do not want to delete blank cells in Column "B" and non number data.
Before:
XXXXX
35069
35070
35855
35855
XXXXX
35865
35867
After:
XXXXX
35069
35070
35855
XXXXX
35865
35867
I have sheet 1 and in c3
d3
1st
copy
[Code]....
this two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3) I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
I have sheet 1 and in
c3
d3
1st
copy
1347
0934
[Code] .......
This two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3)
I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
how many accounts, and list the total on the bottom.
So, I have something like this:
10003722
10003722
10003722
10003722
10008981
10008981
10008981
10008981
10008981
10028163
10034527
I need the column next to it to show #1 next to 10003722 than jump to the next one and have 2 next to 10008981 and so on...
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I'm creating a macro that creates a co-ocurrence matrix from variables that are adjacent to each other.
In order to proceed, I need to know how to return the column number of the first (leftmost) column in a range that the user selects.
Having an issue with an array formula.
{IFERROR(INDEX('sheet2'!$A$2:$A$14,SMALL(IF('sheet2'!$C$2:$C$14="X",
ROW('sheet2'!$A$2:$A$14)-ROW('sheet2'!$A$1)),C$2),1),"")}.
Originally I did not need to skip any rows, but now I have to skip certain rows. I've tried using my current array formula and skipping the rows not needed but can't get it to work.
{IFERROR(INDEX('sheet2'!$A$2:$A$5,$A$9:$A$14:SMALL(IF('sheet2'!$C$2:$C$5,$C$9:$C$14="X",
ROW('sheet2'!$A$2:$A$5,$A$9:$A$14)-ROW('sheet2'!$A$1)),C$2),1),"")}.
Can this still be done with an array formula? I need to skip rows 6, 7, 8. Not sure what I'm doing wrong but no names are appearing. Sheet 1 looks like this with "Job Titles" starting in A2 on sheet1.
Job Titles
Dept.
1
2
3
4
Claims
CSI
Outb Calls
CSI
Notifications
CSI
Evaluator
CSI
I tried a new formula in cell C3
:=IFERROR(INDEX(Sheet2!$A$2:$A$14,SMALL(IF(ROW(Sheet2!$C$2:$C$14)=9,
IF(Sheet2!$C$2:$C$14="x",ROW(Sheet2!$A$2:$A$14)-ROW(Sheet2!$A$1)))),C$2),1),"") entered as an array.
I should see the name "C. Pepper" followed by "L. Smith" when I copy the formula to the right into D3, "J. Rast" would be skipped as these are the rows not being picked up, but nothing is showing.
Sheet 2 looks like this with "Staff Name" starting in cell A1:
Staff Name
Mgr
Claims
Outb Calls
Notifications
Evaluator
A. Hawkins
Adams
[Code] ..........
how to find text from a row in column, where is a lot of text and return row number, of located text?
View 15 Replies View RelatedI know the column number (57) and want the formula to return the column name (BE) Auto Merged Post Until 24 Hrs Passes;not using vba that is! or if so , a custom function so macros dont have to be run.
View 3 Replies View RelatedCan column() return a letter instead of a number? I am planning to use it with INDIRECT? Is that possible?
=INDIRECT(row() & column())?
How to return column number (not letter)?
View 5 Replies View RelatedI have a column with zeros, positive numbers, and negative numbers. I need to find the last (bottom) positive number in the column.
Ex:
Column A has -
$50
$0
-$10
$22
$0
-$14
I want a formula or function in B1 that would return $22. However if I add a new row under the -$14 which contains $37, the formula should then return $37.
I have been googling all night, and I can't make this work.
I have a Range variable that points to a particular cell. If I wanted the address, I would do, cellName.Address. This returns, for example, "$F$3". If I wanted to have the column "F" as a number (column F would be the 6th column, so 6), how could I do that without storing some kind of array of letters and number equivilants. It would also have to work past the 26th column when the column addresses switch to, like, "AA", "AB" etc.
View 3 Replies View RelatedI have range like (3E:3K) in this range are only 2 different expressions. "Result and " forecast". I wanna look from left to right for the first cell with the string "forecast".
And than I want to work with the column of this cell, only this column.
How do i do that?
Edited
I corrected the coordinates. I want to look in a specific column line (Nr.3) from there the first Cell with "Forecast" and from that String the row number.
They following 4 posts were based on wrong informations by me.
I have this issue and I canīt find the solution .
I need to have sometihng that copies only the last ( cell in the right) non-zero cell and past in the same row.
This macro or VBA code needs to search the row, and paste in a column the value of the last cell in the right.
The sheet Iīm working have lots of rows and lots of columns. The columns are dates. And I need to have just a column in the end with the most recent data of each row.
I'm using the LOOKUP function to find the largest number and then return the name from a different column, it looks like this:
=LOOKUP(LARGE(round1!$F$2:$F$65,1),round1!$A$2:$A$65)
but all I get is hashN/A?
I am trying to see if there is a way using count or another option, of using one formula to look in a column and then spit out how many of each item are there:
i.e: lets say it says a, b, c, d etc...
Can a formula go through and say you have 3 of a, 5 of b and so on
I understand the basic of count sum iserror etc, just not sure if excel can do what I am wanting or if i should use access.
I have the following two rows that I'm looking to return a single column number that maxes two criteria. In the example, 70, 30 would return column 7. I'm not looking to create a dummy row the combines the two. Reason for using MATCH or HLOOKUP is that the two values may not be the values in the given table.
View 9 Replies View RelatedI have a got a table ( 10x30) with random numerical values.
How can I return a column number with maximum value?
Values will be changed periodically so the maximum number could be in different column each time
Example:
A-B-C-D-E-F-G
1-2-3-4-5-6-7
2-6-8-18-1-1-8
2-5-6-9-12-1-7
The results will be 4.
i have 2 sheets one called "IS" and the other called "AS" in cell a2 of "IS" is a number that i need to have excel look up in column a of "AS" once it find that number i need it to return the number thats in column e of that row to sheet "IS"column d. summary: a2 of "IS" looked up on sheet "AS" and returns the number in column e to cell d2 of "IS"
View 3 Replies View RelatedI am looking for a formula to return the column number of the array when a specific text is found, in this case the text is "Yes"
The Array will only ever be 5 cells beside each other in a row
for example, M4:Q4, will be as follows - No No No Yes No
I want a formula to look at these 5 cells and return the number 4 as that is where the "Yes" value is
