Returning Totals In A Series Of Tables
Dec 29, 2008
I have a data dump which is a series of tables, the layout and headers of the tables are fairly fixed however the number of rows in each table is constantly changing. What i would like to do is return the table header, and the average turnaround for each table, preferably without amending the tables. Attached is a sample, these tables marked task C1 task C2 etc are the table headers and in the cell next to Average turnaround is the value i would like to return. I would also like to return the bottom value of each table in column C so at the end it should look like:
Task C1 434 2.52
Task C2 16 3.00
Task C3 10 2.20
Task C4 329 3.24
I do not want to amend or adjust the table as this sheet continues on for 3000 more tables, which is the reason i am looking for a VB lookup type function.
Sheet Attached..
View 9 Replies
ADVERTISEMENT
Aug 7, 2014
I have a list of stores and the costs for various items.
Each store has (usually) more than one row.
Each store's items are totaled at the end of each line. Simple
What I do not know how to do is total all rows for each store, automatically. Like I said, I don't know how to explain it, so searching for it does not work out well for me.
Please see the attached sheet : How to Calculate Store Total.xlsx
View 9 Replies
View Related
Aug 6, 2006
I created again some pivots and now i want to make calculations between the pivot items and pivot totals. Is this possible. And if not how can a use other Excel trick to overcome this problem? attached file is for more details.
View 3 Replies
View Related
Mar 20, 2014
I currently have a problem with suming the costs from tables across multiple sheets where the tables are of varying size.
Each sheet, 'sheet1' to 'sheet10' for simplicity sake, has a simple table consisting of two columns, 'Item' and 'Cost'. Each row contains a certain item and it's respective cost. The bottom of each table then has 'Total' in the item column and the sum of the total costs in the 'Cost' column.
However, each table on each sheet has a varying number of rows. This means on 'sheet1' the total may be in B5 and on 'sheet2' it might be in B7.
I need to sum all the total costs from 'sheet1' to 'sheet10' in a single cell.
I tried using the =SUMIFS formula with a 3D Range but I discovered that you can't use this formula with a 3D Range.
The only solution I could think of is to use a loop that goes through each sheet in turn, searches Column A for 'Total' and then adds the cell next to it to a running total.
View 3 Replies
View Related
Nov 26, 2007
1) Not using a macro and combining relevant w/s functions, is there an intelligent way to return the value of:
SUM(n=n1 to n=n2) of (-1)^(n-1)*(n)^(n-2)/(n-1)!*X^n
to a cell containing the formula ??
2)Example:
n1 in cell A5:: 1 (integer variable)
n2 in cell A6:: 32 (integer variable)
X value in cell A7::1.00
Returned sum in cell A8:: 0.567143 ...
View 9 Replies
View Related
Dec 10, 2013
I have a list of data in Column A of a spreadsheet that is all at different lengths.
I would like to return the numbers from this (see below) seperately and also everything after the last number so returning "green"
Example:
EAST MIDS, YORKSHIRE0112012green
EAST MIDS, YORKSHIRE0112012red
EAST MIDS, YORKSHIRE0112013black
EAST MIDS, YORKSHIRE0112013brown
View 1 Replies
View Related
Apr 29, 2014
I have a spreadsheet that has amortization tables for several loans. I am trying to add a summary tab that will pull the next due date on each loan. Some of the loans are behind so I can't use a >today() function. I have been trying the following:
=MIN(IF(AND(ISBLANK(Smith!A:A),NOT(ISBLANK(Smith!B:B))),Smith!B:B))
Column A is date payment is actually made, and column B is due date, so I want to return the first column B that has nothing in column A.
View 1 Replies
View Related
Mar 23, 2014
This example workbook contains a datatable, which is inputted via a userform. The datatable has 4 columns: Date, Invoice no., Loads, Tonnage. This table is dynamic, as a new row gets entered each time data is entered in the userform. A different userform (the one in the example) has comboboxes which refer to the data in the table. This userform asks the user for the Date, Invoice no., Loads and Tonnage. I want to use comboboxes so that they will advise the input based on the users previous input.
The first combobox asks the user for a data, and should contain a list of all the unique dates that are stored in the table. When the first combobox is inputted, the list for the second combobox will change. The list of the second combobox should be a list of unique invoice numbers, based on the date that has already been entered. The 3rd and the 4th combobox should also show a list of unique values, based on the previously entered date and invoice no.
Example: The first combobox should advise the dates: 4-Nov-14 and 15-Nov-14. User chooses 4-Nov --> second combobox should advise unique invoice numbers based on chosen date: 1252 and 1311. User chooses 1152 --> 3rd combobox should advise unique values based on previous values: 3, 8 and 7. 4th combobox: 57, 23 and 47.
View 3 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Jul 1, 2013
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
View 2 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Aug 22, 2014
I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
View 8 Replies
View Related
Sep 21, 2011
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
Oct 9, 2008
Here's what I have...
Column A Column G
date $ Amount
my data example...
10/5/2008 $10.00
10/5/2008 $20.00
10/8/2008 $12.00
10/8/2008 $8.00
10/8/2008 $25.00
10/9/2008 $75.00
What I want the formula to do is look in Column A find all of the dates that are on the same day and then look in column G and add all of those $ amounts.
So the result would be...
10/5/2008 $30.00
10/8/2008 $45.00
10/9/2008 $75.00
View 4 Replies
View Related
Jun 5, 2014
Here is what I have:
cell b6 =SUM(B3:B4)
cell b8 =C8*B6
cell b20 =SUM(B11:B18)
cell b29 =SUM(B22:B27)
I want to add all these cells together for the total. I used the formula =SUM(B6+B8+B20) and it works fine. However, when I try =SUM(B6+B8+B20+B29) I end up with 0.00 in cell B31
View 2 Replies
View Related
Nov 22, 2012
I'm tracking 50 food items (in column A) for 40 homes (columns B-AO) where each home gets none or varying quantities for each food item (ex: apples 7 for home B, 0 for homes C-L, 19 for home M, etc.). I can get grand totals for each item for all homes, but need to also list how many for each home receiving apples. Ex: 4 homes get apples (4, 7, 19, 1 respectively). SO I want my total sheet to have a column for each food item with the grand total "31" and the second column to show 4 + 7 + 19 + 1. The quantities change frequently so I need a formula I can use for each food item. Also I don't want "zeroes" included. What formula would I use to do this?
View 3 Replies
View Related
Jan 2, 2014
I've been trying different combinations of "If" statements to get a sum for the total items in house or total items at outside vend.
I need something that will be able to differentiate from parts in house to parts outside vend and put the total sums into M2 and M4
Please see the attached sample : Sample Qty.xlsx
View 2 Replies
View Related
Oct 9, 2008
Does Excel know week numbers? e.g. Week 40 is Sunday 10/5/2008 to Saturday 10/11/2008. Here's what I have...
Column A Column G
date $ Amount
my data example...
10/5/2008 $10.00
10/5/2008 $20.00
10/8/2008 $12.00
10/11/2008 $8.00
10/12/2008 $25.00
10/13/2008 $75.00
What I want the formula to do is look in Column A find all of the dates that are in week # whatever and then look in column G and add all of those $ amounts. So the result would be...
Week 40 $50.00
Week 41 $100.00
View 3 Replies
View Related
Jul 9, 2009
I need help to total a column but in four cells the values are as a result of conditional formatting and the total ignores those cells. Is this difficult or am I a bit slow? This is in 2003.
View 6 Replies
View Related
Oct 20, 2009
This problem has come at the end of a big exercise whereby I've managed to construct a spreadsheet that automates three payment processes based on various VLookups to another file. However, I've come to a stage where I need to pre-empt a payment allocation based on cumulative totals.
I'll try and explain clearly below but I've also attached a spreadsheet showing the intended result (along with a copy without the output so that someone can add in the formula - again, if it exists.
So, this all centres around a code allocated to our clients and a declaration that they complete. Say client code "Apple1" (col E) sends in instructions to pay on a position of "650,000" (col F). Within our existing spreadsheet we have an available position of "800,000" which can be seen by totalling column G for client code "Apple 1".
So that's the first requirement - for all rows on my existing spreadsheet for client code "Apple1", I want to add the cumulative total of column G ("800,000") I'd like this captured in column H, as per my example.
We can then make payment based on their declaration, up to their total available amount. However, we need to pay them in stages according to our existing allocations (col G). Therefore, taking the first example, their declaration show's an available position of 650,000, their total position is 800,000 and the available nominal amount for that row (col G) is 200,000 - so they can be paid on that full amount therefore, 200,000 should be shown in cell I3.
So now, they've got 450,000 left to be paid and cell G4 again shows a position of 200,000, so once again, cell I4 should show 200,000.
The client "Apple1" now has a payment amount remaining of 250,000 remaining but in this instance, cell G5 is for 300,000 - so because the remainder of their available payment is less than the amount in cell G5, we should post the available payment amount in that field - 250000.
Therefore, if you add up all of column I for client "Apple1" it comes to 650,000 - the amount we have on our declaration - even though the total of their available position is 800,000.
I've included another client in the mix "Sauce2" who should show 200,000 and 0 respectively in cells I6 and I7.
View 14 Replies
View Related
Apr 20, 2009
Let me first explain what my worksheet looks like.
View 2 Replies
View Related
Jan 11, 2008
I have a column of wickets (M). M5 and M6 are the number of wickets for one match, M7 and M8 for the next, and so on. Two wicket entries for each match.
I needed a formula to count the amount of times the combined wicket total for a match is greater than 10. Initially there were only a few M values, so I used this:
IF(M5+M6>=10,1,0)+IF(M7+M8>=10,1,0)+... and so on. Now I want to expand it to have more M values and this formula would become huge.
View 11 Replies
View Related
Nov 29, 2011
I have a file tens of thousands of lines long. This has a bunch of store numbers along with the amount owing to them.
Now this is presented like this
Str 50 $10
Str 50 $20
Str 50 $15
Str 60 ... etc etc
I just need the totals for each store, which I will then copy into my billing file. The person who sent me this original has already subtotaled it, and each site has a plus sign next to it. When I click the plus sign I can see the breakdown (ie store 50 ten times, store 60 twelve times etc) but otherwise the store totals are given on 'adjacent' rows. The problem is these rows arent actually adjacent, the other rows are just hidden. So when I try to copy the store totals all the other junk gets copied as well.
How do I copy just the store number and totals?
View 6 Replies
View Related
Oct 31, 2006
I would like to get the total in column B but its not giving me the correct total. So I would half to use a helper column in column D to retrieve correct results. Is there anyway I could have an all in one formula for this. I would prefer not to use the helper column. The correct result is in cell D23.
View 9 Replies
View Related
May 4, 2007
I would like to know how do I go about adding the following:
This is a test it counts out of 1250 points
But there are 3 fields which can be omitted from the grand total of 1250
Some students might not have all three fields. The fields totals are 30, 90 and 130. The students might have one or two of them in either order. Now what I would like to do is have 3 different fields where I can mark with a Y=Yes and N=No in a block. then it would change the Grand Total score accordingly.
View 9 Replies
View Related
Dec 12, 2007
I have a spread sheet that is used to review calls placed by a call center.
Column A has the extensions of the phones, and Column E has the type of call (Outgoing or Incoming). Each line is a new phone call.
We have about 8 extensions, but the worksheet could have a couple thousand calls. So, Column A could have extension 1401 from rows 1-100 as extension 1401 made 100 calls. I'm looking for a formula or macro that will summarize how many outgoing and incoming calls extension 1401 had. Thoughts?
My initial thought was something like this:
=SUMPRODUCT(--(A2:A5000=H2),(E2:E5000))
In this formula, I would type in the extension of H2 and it would scan Column A and add up the values in Column E. The only problem is, that Column H doesn't contain a numerical value. It only has "Incoming" and "Outgoing" (minus the quotes), so this doesn't work.
View 9 Replies
View Related
