I have created a combination chart comprising a column and a line. The columns to the extreme right and left are half visible (I can only see half of the column).
Look at my two attachments to see what i mean.
Attachments:
Excel File: http://www.MegaShare.com/235337
Screenshot:
OR
http://img530.imageshack.us/my.php?i...icture1qi7.png
Note: I have cross-posted this thread in excelforum.com: http://www.excelforum.com/showthread.php?t=608124
i have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
I have huge columns of data that can only be 30 characters long. I want to use a formula to split the column into two. The original column will have a character limit of 30, and should not cut words in half. If the Length will be more than 30 while including the entire last word of the cell, that word should be the first displayed in adjacent cell in the 2nd column.
The 2nd column can be any length.
I usually use a Text to Columns method, but dont know how to make it not cut off the words.
I have several buttons I and a chart I want to make invisible and visible programatically. The buttons have names like Button65, etc. I did not give them these names. Curiously, these buttons don't have properties when I right click on them in design mode as do other objects. Why not? Further, they act more like rectangles drawn from autoshapes in that I can assign a macro to them, but unlike a rectange they are not named as rectangles (e.g. rectangle 284). Why not? These are hybrid creatures!!
I like to use rectangles as command buttons, but then they do not have properties which allow them to be made invisible, etc...
The chart name is Chart 1. Same problem, it has no properties. How can I make it invisible?
I was wondering if it is possible to hide a column(s) but still have data in that column be visible at the bottom of the spreadsheet. For example, if I hide column G can it only hide the column from rows 1 - 50 and then the column will appear after row 50?
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
I've finally found a good application for sparklines and I was playing around with formatting. I created a simple 4 data point sparkline and the cell where I put it is was blank. If I selected markers it would show them but no line. If I changed to a column sparkline it was totally visible.
I want to sum filtered data from one column V and paste value into TextBox1 Goal for this code is that sum will be displayed into textbox automatically. Also i select data as last row Column "I"
Private Sub TextBox1_Enter() Dim LR As Long LR = Range("I" & Rows.Count).End(xlUp).RowTextBox1.Value = Sum(Range("V2:V" & LR).SpecialCells(xlCellTypeVisible)).ValueEnd Sub
ive added a filter, and on column A i want to find the first blank row under the header and type the word 'tech' and fill down to the last row populated against column b.
I am attempting to have a cell highlighted if the adjacent cells are visible, but no highlighting when the cells are hidden. For example, Cell D1 is highlighted when cells A1:C1 are visible, but not when cells A1:C1 are hidden. (this is for the group/outline feature)
I need to pause for 0.5 seconds (half a second). How can I do that. applicatiom.Wait can only be used for whole seconds and a FOR ... NEXT loop is CPU dependant.
I would like to round down to interger or half. I would give you some examples:
3.76 to become 3.5 2.48 to become 2 -1.12 to become -1.5 0.05 to become 0
I tried to use round down fucntion but I am not able to have the desired outcome. I thnink the issue is with the second argument of the aforementioned function. How many digits should be indicated? I put 1 but it does not work.
I am trying to resize a picture on a worksheet to fit a dynamic measurement(the size of the page is different depending on the contents in cells).
I am doing this all in VBA.
so what I have come up with is that I need to
1) determine the total column width of only the non-hidden(visible) cells. 2) resize my picture to those measurements, so I can get an exact fit, and it doesn't create a new page break, by going over.
I have found some code on forums, and am thinking of something like this as a solution(although I don't know how to complete it):
I am collapsing a field in my pivot table and it is hiding all detail behind it. The column that precedes it is a description of the account number. How do I keep the description visible when collapsing a account number.
Need macro that changes the text in a particular field. Previously, the column to change was column 46 (AT), but now the column is column 1 (A). If I adjust the last line and run the macro, I get this error message: "Compile error: Invalid or unqualified reference".
I have a database that holds thousands of names and the columns are of trinings that they have completed. I can filter by the criteria of name and of ID. ID number is unique so what I want is to know if Column F has a date in it once filtered. It maybe line 789 but that is all it shows because the filter is on.
I have two sheets. One containing in cell B2 "1211 - Extra Core Hours" (t_Cost_Centre_data) and then another sheet that displays the data. On the display sheet, there need to be two fields. Event ID and Event Name. The event ID is the "1211" and the name "Extra Core Hours".
My question is, how do I split the reference so that only the ID and name appear in the relevant cell?
Ie Event ID Event Name 1211 Extra Core Hours
Note, the ID's and names will change and they will be multiple.
I have a spreadsheet with members details in and I've added a few columns showing:
Col Q: Paid 2008 (blank if No, 1 if Yes) Col R: Show Paid Yes or No (shows a Yes or a No) Col S: Date Joined (only entered if new and joined during 2008) Col Z: Subs owing from 2008 (if existing members and owe last yr's subs) Col AA: Subs to Pay in 2009 (a standard £35 or pro rata if joined during 2008) Col AB: Pro Rata (if they joined other than at the beginning of 2008) Col AC: EA Sub? (based on a yes/no column, to add £5 if yes) Col AD: Total to Pay for 2009
So the formulae (or data entered) for the above columns are as follows:
Col Q: Paid 2008 - blank if no, 1 if Yes Col R: Show Paid Yes or No - =IF(Q2=1,"Yes","No") Col S: Date Joined - a date entered in format d/m/yy Col Z: Subs owing from 2008 - =IF(R2="no", 35,0)....I want a default 35 in here Col AA: Subs to Pay in 2009 - =IF(S2="",35,"Pro Rata")....says that if there is no date which indicates they are an existing member, they will pay the standard 35, otherwise they'll be paying a pro rata fee...................
Problem: It all works fine until a certain row (27 actually) - then I get a VALUE! error which points to the Date Joined field. Now I've tested that value against the vlookup table and it returns the correct data, so why doesn't it do it in my spreadsheet????? I've tried changing the formats on the cells; clearing all data; entering a different date, but from that row in the spreadsheet down to the last row, it simply won't work! I've looked at each formula in each cell on the rows where it is working and the rows where it isn't and I can't see anything different.
What else can I look for? It is SO frustrating as it does what I need it to to do but only for a third of the spreadsheet!!!!
Trying to take for example, 9/25/2012 and write a formula to make the resulting cell read 2H2012. Or 4/15/2012 and have the resulting cell read 1H2012.
When I go to print my 1 page document, I've selected to have the page shrink to fit onto 1 page. For some reason, when I choose this option to shrink, it doesn't print the entire document, only about 3/4 of the page or so. Something I did recently that was a little different that may have caused this but am honestly not sure is i added my company logo to the header so it'd print on the document too. If I added it as an image, for some reason it wouldn't print.
