Row Lookup: Return Zero If No Match

Nov 14, 2009

I have exported an income statement report from the ERP system to Excel. Only items that are not equal to zero are populated. So if there has been no expense in the Central division for Consulting fees, it does not show up on the report. Here is the formula:use control shift and enter


small(if(row(A1:A100)-ROW(A1)+1>MATCH("Central Division",A1:A100,0),if(A1:A100)="Consulting Fees",ROW(A1:A100)-ROW(A1)+1)),1)(
Excel Jeanie HTMLSheet2

A 2 East Division 3 Sales 4 Cost of Sales 5 Payroll 6 Lights 7 Consulting Fees 8 Net Profit 9 10 Central Division 11 Sales 12 Cost of Sales 13 Payroll 14 Lights 15 Net Profit 16 17 West Division 18 Sales 19 Cost of Sales 20 Payroll 21 Lights 22 Consulting Fees 23 Net Profit

Excel tables to the web >> Excel Jeanie HTML 4
So this formula picks up the first Consulting Fees after the Central Division. The problem is it is going to pick it up under the West Division. So, how would I modify the formula so that if the row number is also less than Central Division Net Profit (A15), it is zero. (no offset or indirect)

View 9 Replies


ADVERTISEMENT

Lookup Until Conditional Match Then Return Last Value In Row

Mar 17, 2009

I am trying to modify this formula to do one more thing, but I can't quite figure out how to do it. I have part 1 and 2, but part 3 is giving me a very hard time. The formula is not working correctly. It is supposed to do several things.

Do an HLookup for a row and return the last value in the row.If there is no value (blank), the value should be "Incomplete."If HLookup finds a value of "Fail," it should look to see if there is a value of "Pass" BEFORE (to the left of) "Fail." If this exists, then it should return a value of "OK."

Here is what I have so far....

View 9 Replies View Related

Lookup Return Error If No Match Found

Jan 11, 2006

If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.

View 13 Replies View Related

Lookup Drop Down List Value & Return Corresponding Match

Nov 16, 2007

I am trying to create a quotation spreadsheet and want the drop down list to contain the materials but once a selection is made in the drop down list, i want other cells to be accordingly populated with data stored on another worksheet within the workbook.

The source of the drop down list is material and i need other cells to be populated with the adjacent data.

Here is a small list i have at present, which will be much larger when completed.

MATERIAL 20mm 30mm
Absolute Black £62.15£83.30
Absolute Black Premium£71.65£96.10
African Red £58.20£78.00

So if the selection in the drop down list is African Red then it should accordingly populate other cells with the values £58.20 and £78.00. Please help as i have tried many sources elsewhere but without any luck and this would be very benficial.

View 7 Replies View Related

Index Match Lookup, Variable Return Column

Sep 3, 2009

I would imagine that the title of this thread made little sense, so let me try to explain:

Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.

So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.

View 9 Replies View Related

Find & Return One Of Many Values In Cell & Lookup Corresponding Match

Dec 10, 2007

Working on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.

Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION

I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.

PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"

TYPE TABLE:
Sweater SWTR
T-Shirt TSHT
Jeans JEANS

COLOR TABLE:
Blue BL
Green GN
Purple PL
Black BK

I would have separate tables for each part of the description.

The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.

I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.

View 9 Replies View Related

Lookup Column Values In Another & Return Value If Match Found

May 28, 2008

I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".

The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).

I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.

Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.

View 8 Replies View Related

Lookup Match And Return Comment Based On What Is In Relevant Column

Jan 15, 2014

The logic of the formula like this....

TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".

View 1 Replies View Related

Lookup/Match Column Values On Another Worksheet & Return Adjacent Cells

Jul 1, 2008

I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.

View 5 Replies View Related

Lookup / Match And Index To Return Percentage To Table To Draw A Radar Chart?

Jun 25, 2014

I'm struggling with match, index and lookup functions. I have a formula in column D that calculates the percentage of answers against the total score for that category. The way it calculates enables me to delete rows if they are not needed and still provide a total count and a percentage score.

Now the percentage is returned from a dynamic data set, I want to plot the percentages on a spider/radar chart. Instead of manually creating the chart or using a pivot, I wanted to lookup the percentages (column D) against the category (Column A) in question and plot so the chart updates as the user changes the answers.

View 3 Replies View Related

Reverse VLookup (Index Match) To Return Multiple Values Based On Single Lookup Criteria

Jul 11, 2012

I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.

View 1 Replies View Related

Lookup Up/Match: Return A Value In Column A If My Data Matches Column B?

Jun 5, 2009

I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.

View 4 Replies View Related

Lookup/Match: Compare A1 For The Values In Column B, Then Return The Corresponding Cell (column C) In Column D

Jan 31, 2008

I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.

I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.

View 9 Replies View Related

Fastest Lookup Method: Use A Key To Lookup A Value (VLookup, Index/Match, DGet, And The Rest)

Mar 26, 2008

Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?

View 9 Replies View Related

LOOKUP / MATCH Function To Lookup The Owner Name Typed In Cell

Jan 2, 2009

I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.

For example, the data source contains different pets, their names, ages and their owners.

The other sheets are on a one-per-owner basis.

What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:

John Smith (in cell A1)

Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4

View 7 Replies View Related

Index And / Or Match Formula With Multiple Match Required To Return A Value

Jan 21, 2014

See attached file, "Rate Sample Index-Match Formula".

I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".

In the 1st tab, "TEST FILE" there are a series of columns as follows;

A = Service
B = From
C = To
D = Rate

In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)

The formula needs to do the following;

1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59

For Example;

The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.

Additionally, if we were to add service as an additional lookup match how would this work?

View 3 Replies View Related

Lookup/Index-Match-Match Using Segments

Jun 10, 2009

Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.

View 10 Replies View Related

Match 1st And 2nd Columns In 2 Sheets And Return 3rd / 4th And 5th Column If Match

Dec 15, 2013

[URL]

What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.

View 9 Replies View Related

VLOOKUP / INDEX And MATCH To Return All Values That Match

Feb 4, 2014

I have two sheets of data , sheet A and Sheet B.

Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.

I have filled out the first two rows of results that should be returned as an example.

One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.

View 3 Replies View Related

Lookup Match

Jan 8, 2008

I have a two sets of data, both which I have calculated variances plan Vs Actual, I would like to compare the previous months variances of different sheets. I have put a sort on the variances in descending order.

I want to match two fields E.g. B1 & D1 in sheet1 AND if they match then bring back L1 data in sheet2? The both sheets have same column names and in same order.

View 9 Replies View Related

Lookup Closest Match

Nov 3, 2006

I am looking for a fourmla to return a value in a column next to the closest value. Yes, this would normally be a vlookup example however in my application the numbers will not match exact as such in an client lookup application. I need to find the closest value to the value compared in the range and return the value to the right of it.

I have made up a small table attached with comparing what vlookup gives me and what I am looking for.

Example.xls

View 7 Replies View Related

Lookup Or Index And Match

Aug 4, 2014

I am setting up a spreadsheet, that will have multiple sheets for each branch, this will than be referencing back to another sheet for data. As i will be replicating the sheets I want to make the formulas as easy as possible so I dont have to change them in every sheet. I have attached an example, the data sheet will have a table for each month, the remaining sheets will be each branch, ideally I would like to have a formula that looks up the data sheet and returns a value for each month and then be able to replicate the formula across each sheet. As the formula is looking at 3 different areas (date, branch and mortgage balance) i have tried using idex and match, but are not having any success.

View 4 Replies View Related

Lookup With Partial Match

Dec 14, 2012

I am trying to create a lookup table that will lookup parts of a colum and return the second column in the table. For example, column A has a lot of different titles in it, they each contain different segments and codes in them but I need to see if NM is in the list and if it is I want to return a 1.

Column A Lookup COLUMN Lookup Result
NM01A NM 01
NM02B IN 02
IN01A
IN02B

I need to see if what is in the lookup column is in column A, and if it is then I need to return the lookup result.

View 6 Replies View Related

How To Match Value Between A Range - If / When Or Lookup

Nov 13, 2013

I would like to match a value between a weight range.

For example:
0-0.5 gram is $2
0.5-1 gram is $3

So, if my weight is at 0.3, the formula should give $2.

View 7 Replies View Related

Lookup Using Partial Match

May 2, 2014

i need some formula to lookup with partial match "name", like this below :

name
property code
partial name (manual type name)
desired result
jim bob
1988.08.000250
jimmy bob
1988.08.000250

[Code]...

etc...

it's possible with excel formula?

View 3 Replies View Related

Lookup, Match, Combo

Jan 25, 2008

2 worksheets. The first has the raw data and I want to drag some stats onto the second.

I'm trying to make it look in one column on first sheet and identify matches for a range of numbers (say 100 to 199), then where there's a match, look across into another column and count instances of specific inputs (A). ie, 114 has A in column G as does 119 and 199, 115 has B = count will be 3 -

My attempts at stringing combinations of match, IF, Countif and lookup/vlookups have, frankly, been a tad pathetic!

View 9 Replies View Related

Lookup Value Using Row Match From Another Column

Nov 1, 2006

i'm trying to figure out how i could get the sumproducts or anyway to get this forumla work basically i'm trying to have the cost column to vary depending on the variable set on column d & e on the top basically ...

* if d7 is between d2 and e2 use cost 1 for the multiplication to generate H1.
* if d7 is between d3 and e3 use cost 2 for the multiplication to generate H2.

View 3 Replies View Related

Lookup Closest Match

Nov 3, 2006

I am looking for a fourmla to return a value in a column next to the closest value. Yes, this would normally be a vlookup example however in my application the numbers will not match exact as such in an client lookup application. I need to find the closest value to the value compared in the range and return the value to the right of it. I have made up a small table attached with comparing what vlookup gives me and what I am looking for.

View 6 Replies View Related

Lookup When Two Columns Match

Feb 19, 2007

how does the formula change when i want a new column to "bring in" ( lookup?) a corresponding value from the second sheet when it sees that the names match?

For instance:
sheet1
FIRST LAST HEIGHT1
John Smith 5'9

sheet2
FIRST LAST HEIGHT2
John Smith 5'11

So, the conditional format would be a 4th column in the first sheet-- still comparing the first & last names-- but when they match it enters "HEIGHT2" into this 4th column.

This is still a conditional format, right? sorry if it doesn't belong here

View 9 Replies View Related

Lookup & Cross Match

Aug 30, 2007

I am trying to create a project on excel in which there exists four worksheets. I deleted "class 2-4" due to file size but are very similar. My question here is i need a macro to located the number from the "current" column in the Manual Input section in the "Main Page" worksheet. The current number must match column A into the appropriate sheet (depending on class) and then look for the volume in row 5 and then round up to the nearest number. My goal is to input the "proposed" number into the appropriate column and row. This will be done for four different classes. My goal is to develop this table so that i can look for trends.

Eventaully i would like to concatenate multiple proposed values for each cell as the macro will need to add onto what is located in the cell should the value already exist. Code must be a module so it runs when ever data is entered in the current, proposed, and volume cells in the manual input.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved