Lookup When Two Columns Match
Feb 19, 2007
how does the formula change when i want a new column to "bring in" ( lookup?) a corresponding value from the second sheet when it sees that the names match?
For instance:
sheet1
FIRST LAST HEIGHT1
John Smith 5'9
sheet2
FIRST LAST HEIGHT2
John Smith 5'11
So, the conditional format would be a 4th column in the first sheet-- still comparing the first & last names-- but when they match it enters "HEIGHT2" into this 4th column.
This is still a conditional format, right? sorry if it doesn't belong here
View 9 Replies
ADVERTISEMENT
Jan 1, 2008
i did find a thread concerning my question but the topic was closed & the OPs best answer had been edited & removed for some reason...
i'm comparing annual pro sports stats for a project & want to do a vlookup contingent on pairs of columns matching between two sheets. ie if a first AND last name in one sheet match a first and last name in a second sheet then fill in x statistic. i dont know VB or anything, but i assume this can be done w/ a pretty simple formula
attached small example
View 3 Replies
View Related
Apr 27, 2009
I'm working on budgets (salaries). I have one main spreadsheet with all employee names listed - other spreadsheets are for each department. I need to bring the total salary from the department spreadsheets and would like to do this by looking up (or matching?) the names in the column from the main sheet to the department sheets and then putting the salary from the department spreadsheet to the main spreadsheet. In addition, I have several that have their salary split between two or more departments. On my department spreadsheet I have a column labeled % of salary for this department. On the main spreadsheet, I want to figure out a formula that will sum the percentages for a certain person (so I make sure I don't go over 100%).
For example - Joe Smith's name is on the main employee spreadsheet. He is also listed on 3 other department spreadsheets, with % of salary listed as 30% for department 1, 30% for department 2, and 40% for department 3. On the main spreadsheet I need to add up Joe's percentages from the department spreadsheets.
View 6 Replies
View Related
Feb 9, 2012
I have data like this:
Code:
500a
TRUE470b
440c
TRUE410d
TRUE380e
350f
[Code]...
and I want to look up an approximate value in Col2, say 310, and return it's next-highest friend from Col3, in this case "g". This is easy enough with INDEX and MATCH. But I want to take it one step further and only use those values which are approved by Col1 - so in this case I want 310 to ACTUALLY return "e"
I found some good information here which gets me close. The following works very well. It uses a boolean & operator to match two values at once, but it only works for exact matches. This example goes down the list and finds the first "sydney" which has an "x" and gives the result "h".
Code:
xmelbournea
sydneyb
xadelaidec
xmelbourned
sydneye
[Code]....
When I use this approach on data like in my first example it falls over, my guess is because the boolean & falls down before the MATCH function has a chance to accept an approximate match.
View 5 Replies
View Related
Apr 16, 2014
I want to search (sheet2 column A and B )for a match of (cell A2 and B1 of sheet2) and return value into sheet2 cell B2 Completed and if not found Outstanding
sheet1
A john
B Week 1
sheet2
A2 john
B1 Week 1
sheet2
B2 Completed
Here is a formula I had been using in a google spreadsheet but does not work in excel
=Iferror(If(Filter('DATABASE'!$C:$D;'DATABASE'!$C:$C=SPREADSHEET!$A2;'DATABASE'!$D:$D=SPREADSHEET!G$1)>1;"Completed";"Outstanding");"Outstanding")
View 1 Replies
View Related
Aug 4, 2008
Please see the attached example of my problem. I have TIME in column A in minutes and % in Column B. What I would like to do is search the % column against the value inputed into E2 (in the example 52%) and find the corresponding TIME value (Col A). However, where there is no exact match of the E2 value I would like to select the next greater value. For example as there is no 55% in my example the formula would move on to 57.27% and record 21 in D2.
View 9 Replies
View Related
Feb 20, 2008
I'm using an index array formula I learned here to lookup a value between 2 sheets in a workbook. I have had no trouble using it when matching just 2 pieces of information (first & last name), but now I need to make 3+ matches to get the value & the formula is no longer working.
When I check "show calculation steps" in the attached example, I can actually see that all 4 items have successfully matched across the 2 sheets but for some reason the formula is still not pulling in the desired value. Am I wrong to think that I can match more than 2 items w/ this kind of a formula?
View 3 Replies
View Related
Aug 23, 2008
I have 2 reports with the same column headings. I want Excel to compare each one on the common OrderID and then just show me the ones that don't match--either one invoice can't be found on the other, or in the cases where they are found, the invoice amounts do not match (IOW create an exception report).
View 2 Replies
View Related
Feb 15, 2007
I am trying to do a (what I thought was a) simple lookup involving 2 columns.
Pls see attached example. I am trying to find the "?" values, by matching column A&B of the input to the Data columns and returning the $$$ column.
I thought this wouldve been a piece of cake but its got me stumped!
View 9 Replies
View Related
Jul 12, 2014
I need a formula for left coulmn lookup (using index and matching function) and lookup array has duplicate value.
View 1 Replies
View Related
Feb 14, 2014
I am building a timeclock, and am using a user form to allow people to sign in/out.
I have a punch in form that logs the inputed username and password (after being checked against my employee list), along with a count of their username on this sheet (as a count of how many times they have punched in) and a timestamp (column 4). These values are all pasted to the first blank row in my worksheet "PunchInTimes".
Then, I have a punch out button that logs these same values the same way, only on "PunchOutTimes". Then, the idea is to link the index number of the PunchOutTimes record and PunchInTimes record for any given user, so that when they punch out, a complete record is pasted (to the first blank row) in a separate worksheet called "Timesheets".
I have been able to paste the username and count to the "Timesheets" sheet, however as soon as I try to index/match the count and inputed username (on the punch out form), I get an error 13 type mismatch.
I'm trying to paste the corresponding punch in time to this punch out time, so ive used an index/match with two columns (username and count) found in "PunchInTimes", and try to return the corresponding 4th column value (punch in time). After pasting the "punch out only" values to the PunchOutTimes, i used a "With/End With" statement, and set wsc equal to my 'timesheets' worksheet at the beginning of my code. So the line where I get my error is below in bold:
[Code] ......
View 4 Replies
View Related
Mar 26, 2008
Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
View 9 Replies
View Related
Jan 2, 2009
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
View 7 Replies
View Related
Jun 10, 2009
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies
View Related
Apr 7, 2014
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
View 3 Replies
View Related
Dec 15, 2013
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
View 9 Replies
View Related
Feb 20, 2009
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
View 7 Replies
View Related
Jan 8, 2008
I have a two sets of data, both which I have calculated variances plan Vs Actual, I would like to compare the previous months variances of different sheets. I have put a sort on the variances in descending order.
I want to match two fields E.g. B1 & D1 in sheet1 AND if they match then bring back L1 data in sheet2? The both sheets have same column names and in same order.
View 9 Replies
View Related
Jan 28, 2008
HOw can I match combination columns of A-F (row1) to combination H-M (rows1 to end) and show how
many are number matched in column N..
ex..
Rows
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1
2
3
16
17
11
9
11
17
18
View 9 Replies
View Related
Nov 3, 2006
I am looking for a fourmla to return a value in a column next to the closest value. Yes, this would normally be a vlookup example however in my application the numbers will not match exact as such in an client lookup application. I need to find the closest value to the value compared in the range and return the value to the right of it.
I have made up a small table attached with comparing what vlookup gives me and what I am looking for.
Example.xls
View 7 Replies
View Related
Aug 4, 2014
I am setting up a spreadsheet, that will have multiple sheets for each branch, this will than be referencing back to another sheet for data. As i will be replicating the sheets I want to make the formulas as easy as possible so I dont have to change them in every sheet. I have attached an example, the data sheet will have a table for each month, the remaining sheets will be each branch, ideally I would like to have a formula that looks up the data sheet and returns a value for each month and then be able to replicate the formula across each sheet. As the formula is looking at 3 different areas (date, branch and mortgage balance) i have tried using idex and match, but are not having any success.
View 4 Replies
View Related
Dec 14, 2012
I am trying to create a lookup table that will lookup parts of a colum and return the second column in the table. For example, column A has a lot of different titles in it, they each contain different segments and codes in them but I need to see if NM is in the list and if it is I want to return a 1.
Column A Lookup COLUMN Lookup Result
NM01A NM 01
NM02B IN 02
IN01A
IN02B
I need to see if what is in the lookup column is in column A, and if it is then I need to return the lookup result.
View 6 Replies
View Related
Nov 13, 2013
I would like to match a value between a weight range.
For example:
0-0.5 gram is $2
0.5-1 gram is $3
So, if my weight is at 0.3, the formula should give $2.
View 7 Replies
View Related
May 2, 2014
i need some formula to lookup with partial match "name", like this below :
name
property code
partial name (manual type name)
desired result
jim bob
1988.08.000250
jimmy bob
1988.08.000250
[Code]...
etc...
it's possible with excel formula?
View 3 Replies
View Related
Jan 25, 2008
2 worksheets. The first has the raw data and I want to drag some stats onto the second.
I'm trying to make it look in one column on first sheet and identify matches for a range of numbers (say 100 to 199), then where there's a match, look across into another column and count instances of specific inputs (A). ie, 114 has A in column G as does 119 and 199, 115 has B = count will be 3 -
My attempts at stringing combinations of match, IF, Countif and lookup/vlookups have, frankly, been a tad pathetic!
View 9 Replies
View Related
Nov 14, 2009
I have exported an income statement report from the ERP system to Excel. Only items that are not equal to zero are populated. So if there has been no expense in the Central division for Consulting fees, it does not show up on the report. Here is the formula:use control shift and enter
small(if(row(A1:A100)-ROW(A1)+1>MATCH("Central Division",A1:A100,0),if(A1:A100)="Consulting Fees",ROW(A1:A100)-ROW(A1)+1)),1)(
Excel Jeanie HTMLSheet2
A 2 East Division 3 Sales 4 Cost of Sales 5 Payroll 6 Lights 7 Consulting Fees 8 Net Profit 9 10 Central Division 11 Sales 12 Cost of Sales 13 Payroll 14 Lights 15 Net Profit 16 17 West Division 18 Sales 19 Cost of Sales 20 Payroll 21 Lights 22 Consulting Fees 23 Net Profit
Excel tables to the web >> Excel Jeanie HTML 4
So this formula picks up the first Consulting Fees after the Central Division. The problem is it is going to pick it up under the West Division. So, how would I modify the formula so that if the row number is also less than Central Division Net Profit (A15), it is zero. (no offset or indirect)
View 9 Replies
View Related
Nov 1, 2006
i'm trying to figure out how i could get the sumproducts or anyway to get this forumla work basically i'm trying to have the cost column to vary depending on the variable set on column d & e on the top basically ...
* if d7 is between d2 and e2 use cost 1 for the multiplication to generate H1.
* if d7 is between d3 and e3 use cost 2 for the multiplication to generate H2.
View 3 Replies
View Related
Nov 3, 2006
I am looking for a fourmla to return a value in a column next to the closest value. Yes, this would normally be a vlookup example however in my application the numbers will not match exact as such in an client lookup application. I need to find the closest value to the value compared in the range and return the value to the right of it. I have made up a small table attached with comparing what vlookup gives me and what I am looking for.
View 6 Replies
View Related
Aug 30, 2007
I am trying to create a project on excel in which there exists four worksheets. I deleted "class 2-4" due to file size but are very similar. My question here is i need a macro to located the number from the "current" column in the Manual Input section in the "Main Page" worksheet. The current number must match column A into the appropriate sheet (depending on class) and then look for the volume in row 5 and then round up to the nearest number. My goal is to input the "proposed" number into the appropriate column and row. This will be done for four different classes. My goal is to develop this table so that i can look for trends.
Eventaully i would like to concatenate multiple proposed values for each cell as the macro will need to add onto what is located in the cell should the value already exist. Code must be a module so it runs when ever data is entered in the current, proposed, and volume cells in the manual input.
View 3 Replies
View Related
May 23, 2008
I have a list of id's in one column and values in the next in ordered value ie
1 1000
2 900
3 800
4 700
Then I have a result in one Cell ie 850
What I would like to get is the ID that it is nearest to but not over.
ie its over 800 but less than 900 so give me 3
data starts in cell A1
View 5 Replies
View Related
