I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 RepliesEssentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
View 3 Replies View RelatedI need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
Basically what I am trying to do is use a Lookup formula on a sales invoice where the product name and product price will be automatically entered into the sales form when the product ID is entered. What would the formula be?
Product Information
RegionProduct IDProduct NameProduct Price
Product IDHPPHomeware Pizza Pan19.95
Product NameSPPStone Pizza Pan 29.95
Product PriceHCDHomeware Casserole Dish19.95
Units SoldHCPHomeware Cookie Pan 9.95
Total SaleCWChina Wok 19.95
HEWHomeware Electric Wok29.95
WCMWilson Coffee Machine29.95
HBMHomeware Bread Machine49.95
HBMDHomeware Bread Machine -Deluxe89.95
HRHomeware Rotisserie119.95
OGGOlson Gas Grill 159.95
OEGOlson Electric Grill 159.95
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
Working on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.
Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION
I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.
PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"
TYPE TABLE:
Sweater SWTR
T-Shirt TSHT
Jeans JEANS
COLOR TABLE:
Blue BL
Green GN
Purple PL
Black BK
I would have separate tables for each part of the description.
The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.
I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedI would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
The logic of the formula like this....
TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedHere's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe
456 Jane Doe
List of individuals with state business
John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX
I have two worksheets. The first one contains 500 rows:
Column A - Company Name
Column J - Formula that calculates a 'company score' based on other data in columns B-H
Column K - Number of directors
The second worksheet contains over 3000 rows:
Column A - Name
Column B - Company
Column C - Designation
I want to caculate a score for each person (from worksheet 2) that does the following:
Personal Score = ('Company Score' / No. of directors) * Designation Weighting
Where Designation Weighting (numerical value) is determined by Designation (text). There are 10 different and mutually exclusive types of text in the Designation column.
My problem is compounded by the fact that each person (in worksheet 2) can be directors on several companies. The Personal Score that I want to calculate needs to recognise which different companies they are directors of and sum the scores derived from each company.
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:
Function Nth_Occurrence(range_look As Range, find_it As String, _
occurrence As Long, offset_row As Long, offset_col As Long)
Dim lCount As Long
Dim rFound As Range
Set rFound = range_look.Cells(1, 1)
For lCount = 1 To occurrence
Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole)
Next lCount
Nth_Occurrence = rFound.Offset(offset_row, offset_col)
End Function
The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1)
Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
I have 2 sheets with thousands of clients. One has client contact information and one revenue. I was able to put the 4 columns on 1 sheet. I need a formula that will say if the value of the client name columns match, (Client name) then return the value in the third column (revenue).
One other question, b/c i copied from a pivot table, i have the client name and their email address below in a separate row. Ideally i would have the client their contact and their revenue in 3 columns next to each other. Is there an easy way to bulk move the email address from the row below the column to the column next to the client name?
I have been using a look up that should be bringing me back a numeric value when i enter a certain code that relates to that value.
When i enter the code 267760RuVw the number brought back shoud be 850
When i enter the code 532210BiMe the number brought back should be 2000
The look up that i am using is =VLOOKUP(B4,Lorry!B3:O37,14)
All my sheets are in the same workbook
The look up value is on a sheet called "Pricing" and the table array is on a sheet called "Lorry"
The cell that the look up is entered into just returns N/A
Why is this not working?
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
I have exported an income statement report from the ERP system to Excel. Only items that are not equal to zero are populated. So if there has been no expense in the Central division for Consulting fees, it does not show up on the report. Here is the formula:use control shift and enter
small(if(row(A1:A100)-ROW(A1)+1>MATCH("Central Division",A1:A100,0),if(A1:A100)="Consulting Fees",ROW(A1:A100)-ROW(A1)+1)),1)(
Excel Jeanie HTMLSheet2
A 2 East Division 3 Sales 4 Cost of Sales 5 Payroll 6 Lights 7 Consulting Fees 8 Net Profit 9 10 Central Division 11 Sales 12 Cost of Sales 13 Payroll 14 Lights 15 Net Profit 16 17 West Division 18 Sales 19 Cost of Sales 20 Payroll 21 Lights 22 Consulting Fees 23 Net Profit
Excel tables to the web >> Excel Jeanie HTML 4
So this formula picks up the first Consulting Fees after the Central Division. The problem is it is going to pick it up under the West Division. So, how would I modify the formula so that if the row number is also less than Central Division Net Profit (A15), it is zero. (no offset or indirect)
Is it possible to write some VBA code that will copy IDs from Sheet1 and then find these IDs in Sheet2 and return the values these IDs have?
View 4 Replies View RelatedI am trying to modify this formula to do one more thing, but I can't quite figure out how to do it. I have part 1 and 2, but part 3 is giving me a very hard time. The formula is not working correctly. It is supposed to do several things.
Do an HLookup for a row and return the last value in the row.If there is no value (blank), the value should be "Incomplete."If HLookup finds a value of "Fail," it should look to see if there is a value of "Pass" BEFORE (to the left of) "Fail." If this exists, then it should return a value of "OK."
Here is what I have so far....
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
I am trying to create a quotation spreadsheet and want the drop down list to contain the materials but once a selection is made in the drop down list, i want other cells to be accordingly populated with data stored on another worksheet within the workbook.
The source of the drop down list is material and i need other cells to be populated with the adjacent data.
Here is a small list i have at present, which will be much larger when completed.
MATERIAL 20mm 30mm
Absolute Black £62.15£83.30
Absolute Black Premium£71.65£96.10
African Red £58.20£78.00
So if the selection in the drop down list is African Red then it should accordingly populate other cells with the values £58.20 and £78.00. Please help as i have tried many sources elsewhere but without any luck and this would be very benficial.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I have a data set with the weeks of the year as my column headers and a value of 1 (from a pivot table) in a distinct row value (removed for privacy) showing whether it existed in a given week based on pre defined criteria. What i need to do is ID the first (from the left) non blank cell in each row and then return that cells column header. I then need to do the same for the last (from the left) non blank cell in each row and then return that cells column header. On the attached I've put values in column N and O to show an example of what I need to return using a formula.
View 7 Replies View RelatedI have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.