I need to run only one of three Macros depending on the contents of an individual cell. Logically speaking, if cell a1 is "YES" , run Macro 1 which will unhide worksheet1, If it is "NO" , Run Macro 2 which will unhide worksheet2, and if it is N/A, run macro 3 which will unhide worksheet3.
Is "IF" nested the best approach for this ?
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
I am a teacher in London and have set my class a problem and I am not sure if it can be solved the way I thought (Duh!)
They are designing an ATM screen that moves on to another worksheet/screen according to whether a password is correct or not.
is it possible to write an if then statement in a macro (in Excel) in order to run a specific portion of it. I.e. If C4="blank" then continue running the macro, if not skip to a lower portion of the macro.
I'm attempting to write a macro to format specific sections of a generated output from another system. The issue is that there could be 2 sections or 75 sections, so I would have to write the if then to skip repeating the macro and skip to the end, which would format the footer, once it hits a specific blank cell 2 lines below the last section it formatted.
Is it possible to run a macro from an IF command?
View 9 Replies View RelatedI am trying to write an if statement in my macro. It is not returning what I want. Can anyone tell me where I have gone wrong.
Dim D As Variant
D = Sheets("Instructions").Range("n3").Value
If D = 1 Then
'range("n5).value
Else
'range("b3").value
End If
I want to use wildcards and it seems I cannot do it with case select, is it possible?
Its required because for the list of PSV's I have more than 2000 names and I would like to use *PSV* for them all instead of typing them all.
Here is the code below:
Option Explicit
Sub Colorize(Rng As Range)
Dim Cel As Range
Application.DisplayAlerts = False
Application.EnableEvents = False
[Code] .......
i have tried 2 different ways of sorting my worksheets in alphabetical order. Each time i try these it does something to all the sheets where it's not letting my For statement to run correctly. It was running correctly before I added the Sort Sheets macro. My workbook has a bunch of sheets for every agent and one summary sheet. The for statement looks in A1 for the condition. the condition is in every sheet except for the summary sheet.
Here is my For statement. Its was looking in A1 for the criteria before and working fine but for some reason it now is finding the criteria in the "summary" sheet when there criteria is not there?!?!
Sub run_it()
If Range("A8") <> "" Then
Range("A8").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.EntireRow.Delete
End If
Dim month As Integer
Dim month1 As String
month = InputBox("Enter the MONTH (Number) you are reporting")
If month = 1 Then
month1 = "January"
ElseIf month = 2 Then
month1 = "February"
ElseIf month = 3 Then .............
I'm having a bit of trouble with a macro designed to read the length text in a cell and if it = a certain length then perform an action (in this case Text to column)
Here is a small sample of the data I'm working with:
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
*End Sample*
The text length I want it to perform the action on is highlighted with "<<" if the length of text does not meet the required number then I want the statement to skip and move onto the next one.
I have the text to column code already done with relative references however the long text string I want the statement activated on is not always present which means that the pattern (0,3) is not always consistent.
In cell M32 there will either be an O or the cell will be blank. In cell T51 I had placed an IF statment like this:
=IF(M32="O","","X")
Now that works ok but there is a glitch on my part. If T51 is blank because of M32 containing an "O" then the user will also enter a number into T51. Because I was using an IF formula in the cell it gets overwritten because of the user needing to enter data in the cell because of M32 containing a O. How do I write a macro so that a similar formula is used but still able to enter data manually without overwritting the formula?
I recorded a macro (which worked), then tried to get more out of it by adding code to add a further function (which didn't work). The code is as follows:-
View 3 Replies View RelatedHow to stop macro while running SendKeys statement. I am not able to stop the process while running SendKeys statement. this is my Sendkeys VBA
For Each cell In Selection
SendKeys cell.Text, True
Next cell
1) I have a VBA macro MyMacro() which works fine.
The macro is assigned to a button on the w/s, and also runs from w/b Open() event and other locations within the w/b.
2) The macro displays a message just before exiting whenever it is called.
3) I’d like the MsgBox statement in the macro to be executed ONLY when the macro is run from the button.
In other words, skip the MsgBox statement when the macro is run from anywhere else in the VBAProject.
Can this be done ? possibly by inserting a statement or two before MsgBox in the MyMacro() code ?
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.
I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet
This is what happens if working right =
look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)
Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)
Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).
I require a macro for the following scenario:
If cell E8 > = D8 (both cells are Dates) then provide message box " can not compile"
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
What I'm trying to have happen is when I enter a cost ($50,000-$240,000) in Sheet 1, I want the fees (cell B2) to correspond to what they are on sheet 2. How should I set up an if statement for this?
View 3 Replies View RelatedHow do I write an if formula for the below example. X = A Week Number. If(X is between 1 and 4,"Y","N").
View 2 Replies View RelatedHere is what I have right now, =if(i3:i133="MLB"&if(b3:b133="W",c3:c133))
Basically the statement needs to contain two "ifs". I have a column that has MLB, CFB, NFL, etc and a column that designates wins and losses. So, what I am trying to make it do is say if i3:i133="sport" AND if b3:b133="W" then add those up.
I have a sheet where A2 is machine name A3 needs to put a -1 if A2 is either Machine 1 or Machine 2. I looked and cant find what I need. I know this should be a no brainer but having problems. here is what I have
=IF(A2="Machine 1",-1,"") or IF(A2="Machine 2",-1,"") this doesnt work
I have also tried something I found
=IF(OR(A2="Machine 1",A2="Machine 2"),-1,"")