I have 2 macros one hides a selection of rows and the other unhides them. What i want to be able to do is when an IF function is true then macro 1 (hide) is used. If the function is false then macro 2 (unhide) works. There is a code in VBA
I have found this code to spred my data from master worksheet to clients worksheets!
Is there a code to add the Sum function in the last row on each of the new worksheets in specific columns where is needed?
Sub ExtractReps() Dim ws1 As Worksheet Dim wsNew As Worksheet Dim rng As Range Dim r As Integer Dim c As Range Set ws1 = Sheets("MAIN") Set rng = Range("A:AG")
What I would like to do is create a macro (use a shorcut key to activate ie crtl+q)or if there is a barcode I could scan to do that when the function is called for it would move down one cell then left 4 cells. I am looking to to this when walking around doing some scanning I could do that function rather than pressing the keys all the time.
I'm having a little problem with the function Sumif. I have data like this:
Date 0 0
Total 0 78[code]...
I want to some all the Totals that appear before the "End Notification" text. I have more totals after that text and the number of rows are variable.
In my data, I have always 4 totals before that text, so I thought perhaps that the way to do this would be to impose to the sumif function to stop summing after counting 4 totals. I didn't find a way to do that.
I thought a little more on the problem and I find out that the easy way would be to record a macro with the sum if function, where, in the range part, I would do a Find for "End Notification"; and select all the cells to the top of the sheet. The problem is that the macro dont record that part, only the row number.I think I need to turn the range a variable, where the variable is equal to the find selection.
I am wanting to create a custom function that i can enter into a cell to run a macro (MyMacro). I do not know how to write a function, but so far i have:
Public Function Run(MacroName As String) Application.Run MyMacro End Function
I have a quote system which takes data from tabbed sheets if there value is greater than 0, then does a simply formula which is then times by a discount which found by searching for the sheet name and then attaching the appropirate discount. In short this means that the whole forumale doesn't work and is not displayed
I have Asset Class in Column I and if it is 364A-EL or 365A-EL or 368A-EL or 368B-EL or 369A-EL or 371A-EL or 371B-EL or 373A-EL or 397C-EL then 'POLES' assigned in to Owner Class (Column J).
If Asset Class is 366A-EL or 367A-EL or 367B-EL or 368C-EL or 369B-EL or 371C-EL or 373B-EL then assign UGCBL to Owner Class.
Should we write the macro or can it be accomplished by any Excel Function?
What i am trying to do is count the number of rows that contain data.
It will always start in A7 and when creating the macro i hit control-shift-down arrow.
There will be a differnt number of rows for each data set. When i ran the macro it kept the result of the first data set that i used to create the macro.
It then places all the data on a new sheet. My problem is that some of the formula that the macro places on the new sheet come back with the result #N/A - which is fine, as they are the result of a lookup.
What I want to try and do, is at the end of the macro, get it to delete the row if the activecell is showing as #N/A
I am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
Attached is a sample in which Column"B" contains Total IDs and Column"D" contains worked labour IDs. Now I want the IDs of labour who have not worked in Column"F".
Is it possible to create a macro linked to a button that, once pushed, will cause a particular cell to count up from zero? I would also like to be able to have a second button that would cause the same cell to count down!
I am wanting to write a macro which uses the excel multiple regression function (a part of the data analysis add-in). I tried recording a macro while I selected the regression function (Tools> Data Analysis... etc.) which produced the following:
I have a sub that copies a section of my sheet onto another sheet and then clears out my sheet so I can type in the sales numbers for the next day. Now I am trying to figure out how to get the date to change.
What I would like to do is to have the Macro type the date MM/DD/YYYY into cell C9. The date should be whatever date the computer clock is set to minus 1 (since we are filling out yesterday's sales). The other part that I am struggling with is making B9 appear as the specific day of the week.
The key part of this is, C9 may have the date entered in manually and if so, I would like to be sure that the day of the week matches the date entered if at all possible.
New to creating macro's but looking for a macro or a function to get the below results. The first 2 columns are givens and looking to return the 3rd column. Is there any code that can do this?
I have a piece of my macro that creates a chart on the second sheet in my workbook. However, it tends to appear way off to the right, and then I have to readjust it every time to be where I'm working (columns A-D approx.)
Can I improve the move to specify it to place the graph in a certain All I'm currently doing is:
What im trying to do below is transpose the data under each name in column A across the corresponding row the name is on. Is there a way, without copy and paste specialing, to make excel recognize the cell being a name (perhaps from the list of all names on sheet 3 (Data Range = "Names") and transpose the data under it so it ends up light the highlighted text in the image below? Im thinking a macro?
is there a way to use the functionality of 'MsgBox' but within a function instead of a macro? I use: MsgBox "You must enter a Acquisition Date", vbCritical, "Error Message" now I would like to use it within a funtion.
I want to change my existing macro using InStr function in such a way that when the columns are found then it add the corresponding values. The addition of values have already been done. I just want that if similar values are found then it show the results.
The example workbook with macro is attached : comparestrings.xls
I got a problem with a macro i'm working on. I got column D which contains text as "Figures", "Toys", "3DS", "PS3" etc. I also got column N where i need the macro to display "Toys" if it's a toy, figure, etc; or "Games" if it's "PS3", "PS4" etc.
I'm using the following code, to also select only blank rows (so to ignore row 1 which is table header). Problem is that the result shows only "Games".
I'm working on a quality control project (for products with Model #'s "1098", "1190", & "1220") for the company I work for and I'm having an issue with a macro.
I have data coming from worksheet "Sheet1" AB6:AB21, that's getting "sent" to worksheets "1098", "1190", & "1220" E86:E101, and "Sheet1" AC6:AC21 -> worksheets in E151:E166
In "Sheet1" cell F4, you enter the Model # ("1098" "1190" "1220"). I'd like this data above to ONLY go to the corresponding worksheet as cell F4 and not ALL model # worksheets. Is there a way that I can do this?
I'm working on a quality control project (for products with Model #'s "1098", "1190", & "1220") for the company I work for and I'm having an issue with a macro.
I have data coming from worksheet "Sheet1" AB6:AB21, that's getting "sent" to worksheets "1098", "1190", & "1220" E86:E101, and "Sheet1" AC6:AC21 -> worksheets in E151:E166
In "Sheet1" cell F4, you enter the Model # ("1098" "1190" "1220"). I'd like this data above to ONLY go to the corresponding worksheet as cell F4 and not ALL model # worksheets. Is there a way that I can do this?