It then places all the data on a new sheet. My problem is that some of the formula that the macro places on the new sheet come back with the result #N/A - which is fine, as they are the result of a lookup.
What I want to try and do, is at the end of the macro, get it to delete the row if the activecell is showing as #N/A
I've tried to write a small bit of code for it...
I have the following vlookup working exactly as I want it to in excel: =IF(ISNA(VLOOKUP(LEFT(C2,10)& "*", NAME,2,FALSE)),"",(VLOOKUP(LEFT(C2,10)& "*",NAME,2,FALSE))) -NAME is a defined section on another worksheet
The problem I have is when I come to use this within a vba macro I'm writing the wildcard section automatically gets spaces added so it goes from "*" to " * " and excel doesn't like it! The code I'm using to write it into the cell is simply:
ActiveCell.FormulaR1C1 = _
"=IF(ISNA(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)),"",(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)))"
how to stop the spaces being added?
I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:
http://www.excelforum.com/excel-prog...ant-lists.html
Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.
When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.
=IF(ISBLANK(VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0)),"",VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0))
I've almost got what I need for a mind bending series of sorts that go from worksheet to worksheet. I need to add ISNA along with the ISBLANK above.
I use the following formula. It works except it returns "0" if the field is blank. What alternate formula can I use that will return blank instead of zero if the field is blank?
=IF(B3="","",IF(ISNA(VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)),IF(ISNA(VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),"",VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)))
I realize there are a number of threads on this topic, and I've read through them but have been unable to apply those answers to this problem. I've attached a sample of the worksheet in question. The worksheet is supposed to tell me if messages are supported via a certain Network (BFX).
Column A is the result of a VLOOKUP function, which returns Yes or No if the entry is found, or #N/A if the entry is not found. Column B is my attempt to translate column A into strictly "Yes" and "No", converting an #N/A into a "No". For some reason, the ISNA( function I'm using doesn't seem to work, as highlighted in row 18.
I have 2 spreadsheets. Both have a list of part numbers on. Beside each part number i want a formula that tells me if the part number is present in both spreadsheets so its says TRUE. If its not present then FALSE. I've tried using this command but it doesn't seem to work properly =ISNA(MATCH(B2,A:A,TRUE))
I've attached the 2 spreadsheets. Spreadsheet1 is where i need the forumula placed beside the part numbers so if its present in Spreadsheet2 as well it displays TRUE beside the part number in Spreadsheet1.
I'm trying to get data from another tab, but only if it is greater than or less than a certain number. Here's what I'm using but doesn't seem to work.
=IF(ISNA(VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE)),">=22.00%",VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE))
A13 is targeting the name of the person
Aim MTD is the sheet tab the info is in
And I want to select the information only if the cell value is 22% or greater. If the cell value is less than 22%, I don't want it to read or to read zero. I'm not an excel expert (yet), but hope to be one day!
How to combine ISNA and ISBLANK in the below formula such that it returns empty cell if vlookup cell is blank.
HTML Code:
=IF(ISBLANK(VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0)),"",VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0))
Let me first explain what I tried to do, before getting to the mess I created. Maybe I should use another formula?
I wanted to compare the amounts in two files on the basis of the same product number. Thus search for a sheet and a column in another file for the same value of A6 (current file) and show the value of the same row in another column (of the other file). However, if there is no value I wanted it to display zero (0) or a text such as "False".
First I did a basic LOOKUP which should work?. However it still showed #N/A for cells without a reference value (A6 is THA) or target cells without a target value (€100.00). I tried to avoid this by combining the ISNA function. However, although the last value shown is correct, the ones before change and seem to add up, or refer to another cell?
Another issue I did not come to yet is the fact that I would like it to search for the correct sheet based on the first three letters of the reference (A6), preferably not case sensitive. A6 is Tha13, first three letters indicate sheet name Tha. Any suggestions on this? ...
I'm trying to use this formula but I get the error "too many arguments". How can I do the same as the formula without an error:
=IF(ISNA(VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE)),VLOOKUP(B12,GYROLOKBR!A12:E2000,3,FALSE), VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE),VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE))
I added in the VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE) - when I used it without that it worked. But I have 3 sheets I need the the VLOOKUP to look over and this formula that I copied off another thread only had 2 tabs.
What i want to do is to look up of the value of home and away games seperatly. if there is no match for the lookup i get the "N/A" and if there is no value i get "0". If i get 0 the formula will calculate as a lost game.
View 10 Replies View RelatedAm trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.
Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)
I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.
I have tried the following and variations based on what I know but they return errors.
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
Any better way of using I7 as the lookup value when K7 is blank.
I have 2 macros one hides a selection of rows and the other unhides them. What i want to be able to do is when an IF function is true then macro 1 (hide) is used. If the function is false then macro 2 (unhide) works. There is a code in VBA
View 3 Replies View Relatedif its possible to run a macro from an if statement as in
=if(weekday(A1)=5,Executemacro,"")
Or else how to program the result of a macro to a cell when a certain condition exists?
I already have a macro that takes data from an active cell with a running number:
Range("B5").Select
Selection.Copy
Range("E26").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Now I need to run this Macro when its friday (example)
Can't find it in the VB help files.
I have found this code to spred my data from master worksheet to clients worksheets!
Is there a code to add the Sum function in the last row on each of the new worksheets in specific columns where is needed?
Sub ExtractReps()
Dim ws1 As Worksheet
Dim wsNew As Worksheet
Dim rng As Range
Dim r As Integer
Dim c As Range
Set ws1 = Sheets("MAIN")
Set rng = Range("A:AG")
What I would like to do is create a macro (use a shorcut key to activate ie crtl+q)or if there is a barcode I could scan to do that when the function is called for it would move down one cell then left 4 cells. I am looking to to this when walking around doing some scanning I could do that function rather than pressing the keys all the time.
View 9 Replies View RelatedI'm having a little problem with the function Sumif. I have data like this:
Date
0
0
Total
0
78[code]...
I want to some all the Totals that appear before the "End Notification" text. I have more totals after that text and the number of rows are variable.
In my data, I have always 4 totals before that text, so I thought perhaps that the way to do this would be to impose to the sumif function to stop summing after counting 4 totals. I didn't find a way to do that.
I thought a little more on the problem and I find out that the easy way would be to record a macro with the sum if function, where, in the range part, I would do a Find for "End Notification"; and select all the cells to the top of the sheet. The problem is that the macro dont record that part, only the row number.I think I need to turn the range a variable, where the variable is equal to the find selection.
I am wanting to create a custom function that i can enter into a cell to run a macro (MyMacro). I do not know how to write a function, but so far i have:
Public Function Run(MacroName As String)
Application.Run MyMacro
End Function
I have a quote system which takes data from tabbed sheets if there value is greater than 0, then does a simply formula which is then times by a discount which found by searching for the sheet name and then attaching the appropirate discount. In short this means that the whole forumale doesn't work and is not displayed
View 11 Replies View RelatedI have Asset Class in Column I and if it is 364A-EL or 365A-EL or 368A-EL or 368B-EL or 369A-EL or 371A-EL or 371B-EL or 373A-EL or 397C-EL then 'POLES' assigned in to Owner Class (Column J).
If Asset Class is 366A-EL or 367A-EL or 367B-EL or 368C-EL or 369B-EL or 371C-EL or 373B-EL then assign UGCBL to Owner Class.
Should we write the macro or can it be accomplished by any Excel Function?
What i am trying to do is count the number of rows that contain data.
It will always start in A7 and when creating the macro i hit control-shift-down arrow.
There will be a differnt number of rows for each data set. When i ran the macro it kept the result of the first data set that i used to create the macro.
here is the
I'm using this to unhide rows one at a time:
View 4 Replies View RelatedI am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
View 2 Replies View RelatedTwo months ago, DonkeyOte help me (http://www.excelforum.com/excel-prog...e-formula.html) solve a problem, with this function:
View 6 Replies View RelatedAttached is a sample in which Column"B" contains Total IDs and Column"D" contains worked labour IDs. Now I want the IDs of labour who have not worked in Column"F".
Is it possible to create a macro linked to a button that, once pushed, will cause a particular cell to count up from zero? I would also like to be able to have a second button that would cause the same cell to count down!
View 2 Replies View RelatedI am wanting to write a macro which uses the excel multiple regression function (a part of the data analysis add-in). I tried recording a macro while I selected the regression function (Tools> Data Analysis... etc.) which produced the following:
View 3 Replies View RelatedI have formula as follows that I am trying to use in a Macro. It is working fine as a function by itself.
View 5 Replies View Related