I'm using this code to run a macro whenever data is entered/removed from a cell within a range. (two macros and two cell ranges).
[Code] .....
Now I need to do the same thing for a different cell range (E3:E52) and a different macro (FormatChart2). Do I need to make a new Private sub or can I add it into the existing code?
i want to link my stock portfolio to a spreadsheet to make various calculations on historic performance. my problem is that it is the same cell thats get updated whenever a change occurs, so that there is no history.
let's say i put the DDE-link in cell A1, i would like B1 to be filled with that value and then when the value changes i would like B2 to be filled with the new value and the next time B3, and so on.
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have a whole spreadsheet of data which looks confusing so I need to make it look more attractive to the viewer.
I have column A which shows a number of the branch conducting the transaction and the column will contain numerous different branches which I have sorted into branch order.I think there are too many branches to use the conditional formatting condition (probably 5000 different numbers)
What I wish to do is change the colour of the cell when the branch name changes.
For example Column A= Branch number 123 123 123 345 345 345 456 456 456 789 789
What I need is to highlight all branches 123 with a colour (any colour say red) but when the change in branch number occurs to 345 use a different colour to highlight all the branches (cells) with the number 345 (say grey).Then when the branch changes to 456 use the same colour that highlighted branch 123 (ie red) .Then again when the branch changes to 789 change the colour back to grey again so the spreadsheet shows rows highlighted when a different branch occurs
The above example would look like Column A all branches with 123 ( cell highlighted any colour but say red) branches 345 cells highlighted grey branches 456 cells highlighted red branches 789 grey
The code below works fine, I can copy selected area into new sheet. However, I wish to custom change the Range("A1:AO164") value, for example, at cells(1,1) I key in A1, then cells(1.2) I key in A56, then this changes will reflect to the value in this macro to Range("A1:A56"). I tried using this way :
Dim A as string cells(1,1).text = a cells(1,2).text = b Range("a:b").Select
I am trying to categorize a list of words based on the first letter.
For example:
[Code] ......
I want to see if the letter 'D' in 'Data' occurs in a range from A-G, if so display "A-G" in cell B, else if the first letter occurs from H-M, display H-N in cell B else if the first letter occurs from N-R, display N-R in cell B else display S-Z in cell B.
Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB: Private Sub Worksheet_Change(ByVal Target As Range) Application.ScreenUpdating = False Dim Rng As Range Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry() 'TURNS OFF FILTER IF FINDS ONE ON Dim wks As Worksheet
I'm trying to get a range of cells to change colors. This should happen from VBA code and happen on specified sheet that is not the default sheet when the userform appears that has the button that triggers the event. I have to reference the range with variables because it changes depending on other events.
I want macro2 to activate whenever there is a change in Range(C25:C5000). I want macro2 to activate only once even if there are 10 changes to the cells within this range. I tried the code below but it does not work.
Private Sub Worksheet_Calculate() If ActiveCell.Row > 25 And ActiveCell.Row < 5000 And ActiveCell.Column = 3 Then macro2 End If End Sub
I have a range (J:M) that contains a conditional formatting with more than 3 conditions. It is based on a script I found on this site but the problem is that the colors don't change unless I edit the cell.
I need to edit all cells in this range at once. How can I do that? Basically it could do a loop through all cells in the range and "F2+enter" but it seems to be a very "stupid" way to do it. How can I update the cells in the range in a better way?
I work in a Wordprocessing Center. I have a spreadsheet that is a list of dates, and the jobs/projects that were done on that day. The dates are for the days Thursday, Friday and Saturday.
So, for example: in cell E2:E150 are the dates ranging from 11/2/2007 through 11/4/2007.
Off to the side, in cell L:15 through L:17, I've manually typed in the dates 11/2/2007 to 11/4/2007.
My problem is: I need to be able to count how many times 11/2/2007 shows up in the range of E2:E150. The thing is, I don't want to have to type 11/2/2007 or 11/3/2007 or 11/4/2207 in the formula. I want it to get the specific date from L:15 (what I've typed in).
My goal is that the range of dates will always change in cells E2:E150. Then I will manually type in the three dates of question into cells L15:L17. Then Excel will count the occurences for me.
I have a conditional cell that change color or not if condition...OK so far. Now, how can I change the color of a range of cells when condition is in just one cell. Ex:
Run-Time error '1004': Method 'Range' of object'_worksheet' failed
The Function basically takes any cell in range with a formula and has it blue. If the formula is overwritten by the user it turns the cells colour Red.
Private Sub Worksheet_Change(ByVal Target As Range)
'change Colour of cells from blue if formula based to red if data typed by user
If Not Intersect(Target, Range("AS63,BA5:BP66,BT7:CI55,BU60:BU64,BX60:BX64,CA60:CA64,CD60:CD64,BT55:CI66,BT59:CI59,CF7:CF55,CF65:CF66,DJ19:DJ21,DJ24,DL5:DM36,DJ41,DJ45,DJ48,DL41:DM48,DH50:DH51,DJ50:DJ51,DL50:DM53,DH63,DJ63,DL55:DM58,DL60:DM66,DU5:DV33,DU37:DV58,DZ8:EB8,ED5:EE27,ED31:EE66,EM5:EN12,EM16:EN29,EM33:EN38,DH63,AL5:AM26,AL30:AM49,AL53:AM66,AV5:AW16,AV20:AW29,AV33:AW53,AV55:AW63,CO5:CO66,CQ5:CR66,CY5:CY66,DA5:DB66,DJ5:DJ7,DJ14:DJ15,DJ17")) Is Nothing Then If Target.HasFormula Then Target.Font.ColorIndex = 11 Else Target.Font.ColorIndex = 3 End If End If End Sub
Is there any code to change unlocked cells to locked.. I have worksheets for each month which are protected with unlocked cells. At the end of the month I need to go into the worksheet unprotect it and run a macro to change the unlocked cells to locked so I can protect it again. This is to preserve the data entered into the cells.
I have a worksheey of data and i would like the tab to be a certain colour dependant on the the contents of a range of cells within that worksheet is that possible. i know i need to use VBA and it cna be done based ont he contents of one cell.
So for example i have a sheet of people i am awaiting payment from, based on the last column " bill paid" i want the tab to be Red if there are any blanks in this column/ range and go green when all the cells in the column/ range are filled with "y"
I have the following code that I would like to trigger when cells B26:U26 change to something other then 0 due to a formula? How was I make this happen?
I have attached an example file.. Basically I want the text in a range to change to red if one cell="Description".
Also, I want a cell's text to turn blue if it's corresponding data in the row says "Click on Title to Follow Link"
The example file explains it a lot better..
Thanks for the help.. Sorry if this may seem like a duplicate post but I was not able to get any of the examples I searched for to work that others have posted.. Also, maybe conditional formatting would be an option here but I could not get it to work as it will only meet the first condition that comes across thats true...
I have tried to go around the long way to achieve this but came up with pages of pointless code .... I know there is a better way I just dont know enough about VB to do it myself ... And I know this is EASY for many :-)
-------- Cell ranges h11 to as11 are a totals row. If the total is 0, colorindex is set to vbpatternnone, if >= 1, then colorindex is set to vbpatterngray. Easy right ? I just dont kn ow how to do FROM/IF/DO range loops... --------
Details: The code in worksheet_SelectionChange will contain the following:
1: From range h11 to as11, variable1 = application.interior.colorindex of the cell.
2: Check if the cell is >=1 or <=0 ....
3: If >=1 then set application.interior.colorindex = vbpatterngray. Go to #5. ' (This inserts a pattern over the original color of the cell)
4: If <=0 then set application.interior.colorindex = vbpatternNONE ALSO set application.interior.colorindex = variable1 ' (This clears the cell pattern and returns it to original color)
5. Repeat steps to clear cell pattern and restore color / or insert pattern for all cells from range H11:AS11
I'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).
Start Date End date 02-Jul-12 09-Jul-12
[Code]......
When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.
I have a spreadsheet that contains the 5 digit numbers in the rows and the columns respecstively. I'd like a formular or macro to change font color for each cell. If the combined value of the 5 rows are greater or less than the combined range 87030 and 87200, the 5 cells will be changed to Red. If:.........
When the sum of B7-D7 is less than cell (I7) I would like to change the shade of B7-D7 to orange to indicate that larger values need to be entered to equal the value of cell I7. And when the sum of these three cells does equal I7 their color should change to green. I recorded two macros to change the colors and I've run them to verify they work. But I've got something off in my simple macro below.
Sub uncheck_all() Dim sh As Shape Application.ScreenUpdating = False For Each sh In ActiveSheet.Shapes
[Code]....
Currently, the button just unchecks a bunch of checkmarks. I want to modify the code so it also makes the value in cell C13 change to -9999, C14 to 9999, C16 to -9999 and C17 to 9999.
I'm trying to write a macro that opens selected files, and updates cell F8 to a given value. But if I add more than one file it doesn't work... all in all I want to add 27 files to this macro.
at the moment it is
Sub UpdatePeriod() ' ' updateperiods1 Macro ' Macro recorded 27/09/2006 by navinderm ' ' Keyboard Shortcut: Ctrl+Shift+O ' Workbooks.Open Filename:="G:....*.xls"
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.
So I have a worksheet that has a lot of macros in it. I have just barely run into a problem that happens anytime a change a cell in another workbook that I have open. The second workbook I have open isn't even a macro enabled workbook. But for some reason it gives me an error and says I am trying to run this code.
[Code] ....
It gives me the runtime error 9. This code is supposed to run when I click on a combobox in my main workbook but it is running anytime I change something in my other simple workbook. Why this happens and how to stop it? I have had a lot of similar problems in the past but I just dealt with it by only having one workbook open but in this case I will need both.