determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.
View 4 RepliesI want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I'm using a Private Sub Worksheet_Change(ByVal target As Range) macro on Worksheets(2) to perform certain actions when a selection from Worksheets(1) is pasted to Worksheets(2). Before ending the Worksheet_Change sub I'd like it to deselect the copied selection on Worksheets(1). I've tried to do this by selecting Worksheets(1) and moving the cursor, but VB ignores the "With Application.Worksheets(1)" instruction. Removing "Private" from the sub heading makes no difference.
Is it possible do this with a Worksheet_Change routine? If so, how?
I have a workbook with 120 LOI worksheets that all tie to one master data sheet, and I need to know the date and time of the last change on each worksheet and not the date and time of the last save. The date and time could either be located in a worksheet cell or in the individual worksheet header
View 4 Replies View RelatedI am creating an invoice form in Excel 2003. I like to know if it is possible to increase the value of cel A1 by one everytime a new sheet is created.
For example i created my first worksheet and gave an invoice number 001. Now I create a new worksheet by right clicking on the tab and choose copy/move. I like the second work sheet change the invoice number to 002.
I have created a macro to hide columns depending upon text in specifically identified cells. However, I am getting the error message "Run Time Error 1004 Unable to set the Hidden property of the Range class" with the line in red below highlighted when I debug.
This macro is worksheet specific.
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$K$8"
If Target = "Actual" Then
Columns("C:J").EntireColumn.Hidden = True
Else
Columns("C:J").EntireColumn.Hidden = False
End If
End Select
End Sub
I've been Google-ing for the last 45 minutes and tried to combine them myself, but I'm afraid of breaking it.
I believe the second code was taken from the MrExcel site, I don't remember.
CODE 1:
// Track Changes; updates any/all changed cells with a comment identifying the author, date and change that was made //
Option Explicit
Public preValue As Variant
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Select Case Target.Column
Case Is = 2, 4, 6
Target.ClearComments
Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised "
CODE 2:
// Whenever a specific range of cells are updated, the adjacent cells update with a timestamp //
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("F3:F1000"), .Cells) Is Nothing Then
Application.EnableEvents = False
With .Offset(0, 1)
.Value = Now
End With
End If
Rather than just export and import a module, to import a sheet macro?
I don't quite know what they're called, but basically I have a functional Worksheet_change macro, which is sitting idly in a module. When a separate macro is run which creates new workbooks, It exports that specific module to the desktop, and then the new workbooks all import the module. THat works fine.
But I want all of the new workbooks to get a worksheet_change macro (so a macro that goes into the sheet, not into a module in the workbook)
I need to use the Worksheet Change event in a particular sheet in a specified column which works fine if the data is already there in the sheet and then changed however,the data is in this sheet is actually a Sub-Set of a Main sheet i.e certain filtered records are being copied from Main Sheet and then copied to this IBSL Sheet.
After the data is copied I have to check each record manually and then categorize each record as Fresh , Rebooked , Cancelled , Tranch or On-Hold.....These 4 criterias are added in the Column 38 and the same thing has to be repeated in the column 40 , so when i change the data in the column 38 the same category has to be updated in the same row in the column 40..
But the problem is that the data is first copied from the Main Data Sheet into the IBSL Sheet using a Macro so then this even t gets fired and goes in the DEBUG MODE...
I need this to happen when i change the category manually..I am adding data validation at the same time while copying the data in to the TEMP sheet.
So what can be done to achieve..
I have a column that has time ranges in it. Example: Column N Row 6 thru
253 has the following time ranges: 11am-1pm, 1pm-3pm, 12pm-5pm, 8am-12pm
I need cells with 11am-1pm to read 13:00
I need cells with 1pm-3pm to read 15:00
I need cells with 12pm-5pm to read 17:00
Is there a formula that I can use the look up the entire column and make all the changes at once, or do I have to use the find a replace. The correct format can appear in a different column.
** I found a reply for someone one a different website with the similar problem. Below is the response but it did not work for me.
Try this formula =--SUBSTITUTE(SUBSTITUTE(MID(A6,FIND("-",A6)+1,11),"pm"," pm"),"am"," am")
Also change format to show 13:30 timeframe
I have a consolidated sheet which I maintain to keep track of the scores of my team. Unfortunately from time to time, the format of all the cells is getting changed to "time" value. I do sometimes use an addin which I have downloaded from Straxx.com (excel password remover) and I am not sure if this add-in has anything to do with this.
I am having to change the format of almost 20+ columns every time this happens.
Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then
Select Case Target.Value
Case "1"
Target.Font.ColorIndex = 20
Target.Interior.ColorIndex = 10
Case "Good"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 35
Case "Stable"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 27......................
I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
View 2 Replies View RelatedI enter a date and time in a cell, e.g. "2013-10-07 12:30", and then I save the workbook.
When I open the Workbook again, the cell contents is "2013-10-07 00:00".
I am currently using Excel 2007. I haven't tested this explicitly with Excel 2013 which is my normal working version, but I think I should have noticed it if it had happened in 2013.
Let's say I have column C blank, but every time it's filled in with something I want column A to be today's date and B to be current time. Unfortunately, the functions NOW() and TODAY() don't give me what I want. They get recalculated every time that I update the spreadsheet.
Another thing that I can do is just press ctrl+shift+; to generate a non changing date/time, but I want it to happen automatically (being super lazy).
I have a sheet called Summary. On that sheet, Cell O6 has a drop down with two options, when you change these options, a number of other cells on the same sheet automatically change (just using formulas). Including a cell that I've given the named Range of 'testCell'. Based on the drop down, test cell will either = 8 or 9.
What I also want to change is the format of a range of cells whenever O6 is changed - but only when O6 is changed.
However, the following code does not work. It works fine if i remove the 'If Target.Address = "O6" Then ...' but doesn't work with it included.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "O6" Then
If Range("testCell").Value = 8 Then
Range("P10:AD27").Select
Selection.NumberFormat = "_($* #,##0_);_($* (#,##0);_($* ""-""_);_(@_)"
Range("O6").Select
[code].....
I have a time format in one excel sheet, I need a macro or a formula to change it into a specific format, this is to be able to import it to another software.
I have attached a file here you can see an example, this I manually, I want Row D and E into the format in A, I s it possible to make it in a macro or formula, manually it takes a long time.
File Type: csv TimeFormat.csv
I have a worksheet change macro that from the insertion of date (dd/mm/hhhh) in a cell, fills some other cells with the day number, the week number, the month,...
Everything works fine when i fill one date after the other. But when I try to fill many cells with the same day by dragging the black cross at the right corner of the cell the macro is not activated. how to activate a worksheet change macro by dragging the black cross as a mean to fill many consecutive cells in a column?
Say i have a Worksheet named "gateway" or sometimes it will be "gateway (2)" (3) and so on. Is there a macro that i can call that in some ways calls the active worksheet and renames it to just "gateway" everytime?
View 2 Replies View Relatedi created a sheet and called it "Original" (which somehow is a template), in another sheet i created a big Button named "Create account" ,then i created a macro which copies that "Original" sheet and by default it names it "Original 2 " now that i need a new account each time i click that button to create a new sheet and rename it by the client name i need, in order to keep the "Original" intact as a template. It happens sometimes by mistake that i rename the "Original" one ( The template one) which therefore returns an error when i click the button!
Is there anyway to add to that macro a code which rename that "Original 2" something else lets say "Account" to differentiate it from the Template one?
Or to Protect only the "Original" sheet from being renamed out of the whole sheets i have , in order not to rename it accidentally?
The intent of the code below is to run the marco HideCol when a change is made in cell C10. If I actually change the value in C10 it works. However, I have C10 linked to another worksheet (=anotherpage!A13). When the value changes, my macro is not executing.
Here is the code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim changed As Range
Set changed = Range("C10")
If Not Intersect(Target, changed) Is Nothing Then
HideCol
End If
End Sub
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
When I step through a macro (sessions) or run the macro seperately, it works as intended. When I have it run off of a worksheet_change it doesn't work. Is there an easy fix for this?
Original
Sub sessions()
Dim a As Integer
Dim x As Long
x = Sheets(1).Range("a" & Rows.Count).End(xlUp).Row
Sheets(1).Unprotect Password:="password"
For a = 2 To x
If Cells(a, "m") = Cells(a, "d") And Cells(a, "m") 0 Then
Cells(a, "f").Resize(1, 6).Select
Selection.Locked = True
ElseIf Cells(a, "m") Cells(a, "d") Then
Cells(a, "f").Resize(1, 6).Select
Selection.Locked = False
End If
Next a
I have a workbook with about 12 worksheets within it. I am trying to input a button on worksheet 3 that when pushed would activate worksheet 12. Basically the same as if you clicked on the tab at the bottom of the screen called worksheet 12.
I realise that you have to create a button which Ive done. However I cannot seem to figure out the proper macro code to get the button to change the current worksheet when its pushed.
Here is my situation:
I created one worksheet called: Assumptions. In this worksheet I have 6 different columns representing 6 different cases.
I have completed the first case in a different worksheet called: WL. I would like to copy this case/worksheet WL and be able to change all the reference cells used in case#1: WL to case#2: FA. So all the cells used in my Assumptions worksheet were in the B columns for case 1: WL, for case 2: FA they will all be in the C column, same row, different column.
Any quick way to do the changes?
My case #1 worksheet as over 10 000 formulas, I really don't want to change each and every formula.
I was thinking there was a way to highlight ALL the reference cells used in my Assumption worksheet, so I would have had to drag from B to C cells, only 50 cells. But I can't find it.
The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.
[Code] ......
what I am looking to do is when in colum AA a cell changes to "Drawdown" I'd like the cells in column A:D,F,H:L,N:Q,S:Z on the same row to grey out and a line to be insert below the cell that was changed, if it selects "Fee" , cells in A:D,F,H:L,N:Q,S:Z on the same row.
I have writen the following butit seems rather cumbersome and I can not get the insert line to work.
Code:
Sub Worksheet_Change(ByVal Target As Range)
Dim WatchRange As Range
Dim IntersectRange As Range
Set WatchRange = Range("AA1:AA500")
Set IntersectRange = Intersect(Target, WatchRange)
[code].....
I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.
Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?
Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.
Code:
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then
Rows("5:5").Select
[Code]....
Is it possible to use the Worksheet_Change command to monitor 2 different cells in the same worksheet and call a different procedure depending on which cell is changed. i.e. if cell A1 is changed do this, if cell a2 is changed do that
View 9 Replies View Related