How should I use the If formula in K3 if I want to sum (A3+D3+H3) only if at least one of the cells is not blank. If all of the three cells are blank, I need K3 to stay blank.
I came with the following that worked with only A3+D3 but when trying to include a third cell (h3) I get a "value" result.
=IF(ISBLANK(A3),IF(ISBLANK(D3),"",A3+D3),A3+D3)
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a formula '= COUNTIF(A1:A5,"<"&TODAY())' that counts the number of expired dates in one column. I want to include a second condition to this formula that will check if another column of dates are blank then they should not be counted. So if for example a1:a2 have expired dates, and b1:b2 have both got dates then they should be included in the count.
View 9 Replies View RelatedI have a date on one sheet, and what I thought was the same exact date on another sheet. I want to vlookup off the date, however the values aren't the same. i.e. when I check to see if they = I get a false. They're both formated the same, custom date m/d/yyyy h:mm, and when I ran the check to see if one was text (t=(A1)) I get confirmation that they are both non-text!
View 9 Replies View RelatedI have 2 text cells (A1, B1) that appear to be the same, however, when I typed the formula "=if(A1=B1,"Yes","No)" in cell C1 the result is NO! (see attachment)
View 4 Replies View RelatedI have some columns of data that won't get perfectly aligned. The numbers in all the cells are right aligned but the numbers in some of the cells are a few pixels to the left compared to some other cells that appear to be properly right aligned.
I have attached a screenshot if my explanation isn't clear.
when I sort data columns that contain drop-down menus. My spreadsheet has several columns: "Patient name", "Room #", and "Phone #". Each cell within the "Phone #" column should have a drop-down validation list containing two possible entries: the room's designated telephone number, or NONE. Whenever I add a new patient to a room, these three columns need to be sorted alphabetically by patient name. But when I sort all three lists simultaneously, it looks great- but then I realize that the drop-down lists associated with each "Phone #" cell haven't sorted! They stay in their original location and don't sort with their cell. So the designated telephone numbers for each room are all screwed up.
View 9 Replies View RelatedWhat I have just tried is click "Reset" in the macro menu and resaved the macro and the workbook, and the proper max/min lines seem to be working. However, I still feel a little unstable about it and will watch it closely.
(My next questions is how to "freeze pane" a row of headings on the results page and post the results onto row 2 and downward *without* deleted row 1)
Hello,
Here is my hurdle.
Could someone please look at the code below and see if there is a hint why all rows from the top all the way down (from R5 to R604) are outlined, when the code should successfully be stating already that if a value in the S column (to the right) is the maximum, then only outline the rows that across the R rows (up and down) that are the MIN? Then, those red-outlined rows should successfully display on the Results page.
It worked before, but I do not know now why all of the rows on the Details page are now selected.
Is there some indicator in the code that says outline everything?
Issue 2:
When I try to run the macro from a button I created, a pop up message says that the file is already open. If I take that literally, it is indeed true because I want the file open. Apparently Excel thinks I have 2 files open with the same title. It wants me to either close one of them or rename them, according to the message. But there isn't another file open according to my searching. What does that message really hint for me to do?
I have a WorkBook of 13 sheets
it has 2 Modules:
one unraveling protection from cells protected and restore it to all Sheets in a single step
And the second controls printing process to make it only for rows that conaining date in the predetermined columns
that latter is to break the protection, execute printing and re protection again without user intervention
The strange thing is : after protecting these modules from being viewd by users as it contains THE PASSWORDS .....
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
Here's some code, written by assorted forum members (thanks again!). It is attached to a button and intended to print a report that is determined by the contents of cell Y4.
Sub PrintSingle()
Application. ScreenUpdating = False
ActiveSheet.DisplayAutomaticPageBreaks = False
With ActiveSheet.PageSetup
.PrintArea = "$Y$4:$AG$21"
.Zoom = 95
.Orientation = xlLandscape
End With
Application.ScreenUpdating = True
ActiveWindow.SelectedSheets.PrintOut Copies:=1
End Sub
I've been using/testing this for a couple of weeks now and it has appeared to work exactly as intended. Today, however, as I've attached it to additional sheets, and begun testing them, I noticed that it isn't actually following the code in determining page setup options. The options selected in each individual sheet's setup box are overriding those specified in the code.
Apparently, the only reason it's been printing appropriately for the last couple weeks is because the options selected in the setup box for that particular page are the same as those specified in the macro.
I'm trying to paste the column that my code found into the blank cell C18, which may change in the future, but I got an error that I need to select the cell to paste the column to - I'm not getting the code right. Here's what I've tried:
For Each Cell In Sheets("Total Sell Dollars").Range("1:1")
If Cell.Value Like "2014*" Then
BlankRow = Sheets("Total Sell Dollars").Range("C" & Rows.Count).End(xlUp)
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
Sheets("Total Sell Dollars").Select
End If
Next
When I run this:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
line gets highlighted and it says:
"Run Time error '424': Object Required"
This is the code that I tried when I got the paste error:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1)
and the error was: Run-time error '1004'
We can't paste because the Copy area and paste area aren't the same size.
Try one of the following:
Click one cell, then paste.
Select a rectangle that's the same size, then paste.
Once I paste the column that excel found, I want to go to the next column and paste the found column into the cell C19 - which may change in the future and so on until all the found columns with 2014 in them are pasted.
I'm making a little calculator thing for some of my colleagues, and I've created a warning sheet at the front in case their macro security is set to high or they disable macros.
The thing is, when the workbook is opened with macros enabled, and when it's closed, this warning sheet flashes briefly. Is there any way to avoid this?
My code is:
Private Sub Workbook_Open()
Worksheets("Form").Visible = True
Worksheets("Form").Activate
Worksheets("Enable macros").Visible = False
UserForm1.Show
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Worksheets("Enable Macros").Visible = True
Worksheets("Form").Visible = False
Me.Save
Application.ScreenUpdating = True
End Sub
What can I do to link my worksheets together? I need the months to link from january to december.
I'm trying to come up with a system to maintain attendance of employees. How do I come up with a rolling system to add and deduct the points as their attendance changes? The goal of each employee is to have the least amount of points as possible, because he/she will be penalized once they receive a certain amount of points.
Let's say that Jane was hired in October. She has accumulated 10 points by December from tardies, call-ins, etc. By the end of January, she has perfect attendance; she is awarded half a point to be taken off toward her 10, giving her 9.5. In February, there is a day she does not show up, so now her total goes up to 12.5 (3 pointed added because of NCNS-no show no call). In March and April, she has perfect attendance, so now her total is 11.5. (half a point allowed for each month with perfect attendance)
By rolling, I mean a formula that will calculate continuously over month after month and have the points roll over month to month.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedI'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:
=IF(C2=ISBLANK, B2, B2&": "&C2)
Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?