SUMIF But Where Criteria Is Date Range?
Apr 28, 2014
I am trying to get a SUMIF formula to work where the following: - RANGE = Column N:N (These are all a list of dates) CRITERIA = Cell C20:D20 (These are the dates i want to look at) SUM_RANGE = Column P:P
Basically, I want to SUM all the numbers on Column P where the date in Column N falls between and including the dates in Cell C20 and D20
In attachement, I want to show in the YELLOW cells the SUM of Column P where the Date in Column N is between the Dates in column C and D.
View 3 Replies
ADVERTISEMENT
Apr 2, 2014
I am trying to do a sumif off all dates that fall into a specific year. I know I can do it by either adding a column in either of the sources to get the translated data but I was wondering if I can get this to work by it recognizing the format within the formula only.
View 4 Replies
View Related
Oct 25, 2007
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies
View Related
Dec 13, 2006
I just became a member of your forum, so please forgive me if I am not concise enough or take too long.
I imput the number of hours associated with week ending dates.
A C D
Date Hours OT
01/08/2006 6 2
03/12/2006 8
04/16/2006 3 1
I need to add up the hours for each quarter for Hours & OT
Jan-Mar
Apr-June etc
This is what I came up with, but it doesn't give me the correct value
= SUMIF(A3:A75,"<="&DATE(2006,03,31),C:C)
View 9 Replies
View Related
Mar 3, 2014
I'm looking for a way to write this:
[Code].....
as this :
[Code] .....
Where the criteria runs across a range (G to BG) that can sometimes have columns deleted, but the range must remain fixed.
View 3 Replies
View Related
Oct 10, 2007
I am trying to do a sumif function where it only sums when a different criteria is met in several different columns.
eg
sumif b:b shows portsmouth d:d shows calais f:f shows night then sum range g:g
View 9 Replies
View Related
Oct 23, 2008
Currently I’m using several formulas to acquire my result; I know it can be abbreviated to a more compact formula.
I have four Sheets. One summary sheet and SheetA, SheetB and SheetC containing Data.
All sheets are documented in an equal format, e.g.: in column A: Date, column B: Code (A, B, C or D) and Column C: values.
Criteria are located in the summary sheet e.g.: A2: 1-1-2008 A3: 2-1-2008 and B2: A, B3:B
The data sheets are listed in H1:H3.
The results should cover a sum of col C over the sheets by using the critiria listed in summary sheet.
The criteria range is variable; sometimes I only want to use one criteria and sometimes more.
View 9 Replies
View Related
Aug 19, 2014
I am trying to SUM the total task done per date. The problem is, (for the sake of this problem) the DATE is in Column B and the Task Total is in Column A. I know that SUMIF is not possible because the SUM RANGE should be always on the right side of the CRITERIA.
My question is, is there other formula other than SUM IF to figure this out? or I have no choice but to Interchange the data in a matter that SUMIF function will run.
View 6 Replies
View Related
Feb 17, 2014
A B
17-Feb 5.00
19-Feb 12.00
22-Feb 7.00
26-Feb 10.00
I would like to see the sum of B given it is in the range from 17-Feb to 23-Feb. My estimations so far:
=sumif(A:A,????, B:B)
How do I set up a criteria which would take values from 17-Feb to 23-Feb?
I also tried =sum(sumif(A:A,{17-Feb;?;?;23-feb}, B:B) but it wouldn't let me.
Particularly the problem is in entering the date in the array.
View 1 Replies
View Related
Apr 9, 2013
I have the following formula and it works.
=SUM(IF(AND((Transfers!B6="Labour"),(Transfers!C6="In")),Transfers!G6,""))
Basically the sheet 'transfers' has a column named type and one named in/out, the current formula I have does a logical test on both of these and then if they are both true takes the cost of it from a column named cost. This works fine for single rows. However on another sheet I am trying to use the above formula but there will sometimes be more than one entry for the same date on the sheet 'transfers' and all the same dates that meet the logical test's conditions need to display the sum of the cost on this other sheet.
View 1 Replies
View Related
Jan 8, 2014
I am working on a report for work with the following formula:
=SUMIF(A5:G8,AND(between 1-1-13 and 1-31-13,"soft cost"),G5:G8)
my formula is "IF A5:G8 IS BETWEEN JANUARY 1st 2013 AND JANUARY 31st 2013 AND ALSO IF IT IS A SOFT COST THEN GIVE ME THE SUM OF THAT ROW"
Pretty much column A contains different dates and column C indicates whether a cost is a "hard cost" or a "soft cost". If the date is within the month of January AND if it is a soft cost, I need the dollar amount in column G summed-up (must meet both criteria - January and soft cost).
View 4 Replies
View Related
Jan 27, 2008
Im Trying to use a formula of countif or sumproduct
so the formula will read the range of cells from A2:A30 to see if the word Hydro is in any of those cells, then if the date range from Cell B2:B30 is from range =>Dec-01-2007 to =<Dec-31-2007, then it will count 1.
[Code] ........
But this formula doest count.
I've tried using a multiple if count if with arrays and sumproduct. I really want it to count the ammount of time the work hydro is used during the month on december .
View 3 Replies
View Related
Dec 22, 2013
I am trying to use a date range as a criteria in a SUMIF function. Below are the data and formula I am using.
Forecast
6
4
15
8
Week
1/12/2014
1/19/2014
1/26/2014
2/2/2014
Formula =SUMIF(G2:J2,">L1",G1:J1)
G1:J2 - raw data shown above. L1 = 2/2/2014. Desired result = 8. Result obtained with formula above = 0 how to make this work?
View 3 Replies
View Related
Sep 11, 2009
I am trying to sum multiple columns of data by a sumif based on a criteria in column C, the columns are weekly dated, and I wish to match columns by offset this initial column with a start date and end date and sum columns in between, I have been getting close but only returns one columns values?
SUMIF(FilterCol,$C17&I$9,(StartCol:EndCol))
FilterCol is column for criteria match
Start Col is name range - OFFSET(FilterCol,0,'Summary totals line groups'!$G$4,1,1) - End col similar, (G4 is a match date to find column ref)
View 9 Replies
View Related
Mar 24, 2014
I have a column of hours spent working on a particular task, but I only want to add the hours that fall within a two week reporting period.
Is it correct to use the SUMIF formula? If so how do I write the formula to include the date range desired? Would it go under 'criteria'?
View 2 Replies
View Related
Jun 27, 2014
I'm currently using the below formula to calculate the values within a certain date range.
=SUMIFS(C2:C100,B2:B100,">=2014-06-27",B2:B100,"
View 5 Replies
View Related
Jan 13, 2007
The attached spreadsheet has a "master" workesheet in which I enter customer info, salesperson info, and date. The totals spreadsheet automatically calculates number of sales, contact value.
I need to modify the following formulas to only calculate the data within a date range shown in 2 cells.
=COUNTIF(Master!A1:A176,PayPeriod!A4)
=SUMPRODUCT(--(Master!A1:A176=Totals!A4),(Master!K1:K176))
=E4SUMPRODUCT(--(Master!A1:A176=Totals!A4),(Master!K1:K176))
View 11 Replies
View Related
Feb 13, 2014
I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=IF(ISERROR(VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE)),0,VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE))
View 5 Replies
View Related
Jan 7, 2010
I'm setting up a spreadsheet to manage recurring tasks that fall within a given date range.
I have a named variable (theDate) which pulls the list of matching tasks that fall on a single day, but some fall on multiple days, so I need to somehow extract the next valid date the task will come due.
I've been playing with formulas until my brain got scrambled. I suspect I may not have got enough sleep over Christmas and there's something staring me in the face I'll kick myself over.
Column Headings are:
Description (Col B), [various notes C:E], M, T, W, T, F, S, S, (Cols F:L, marked with x when relevant), StartDate (M), EndDate (N) and my nemesis, NextDate.
That formula should check that 'theDate' falls within the range, if so, lookup whether the appropriate weekday is null or not, and if it's not, then the current date comes back. If it is, then I need it to find the next weekday (by that I don't mean M-F, I mean any of the 7) when it will fall and return that date. I do have the weekday number in F2 if needed, and I'm using a weekday return type of 2 (Mon=1).
'theDate' will usually be in the future, but not always. It needs to not fall over if it's past.
I'd like to do this via formula ideally, since the SOE I'm on keeps losing my Analysis Toolpak, but if I have to code, I have to code.
View 3 Replies
View Related
Mar 24, 2014
I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.
View 1 Replies
View Related
Nov 25, 2013
I am trying to set up a sumif statement with two criteria where if the second criteria is true, the total in the sum range returned is divided by two.
I currently have this:
=SUMIF($G$6:$G$41,"digital",I6:I41)
I want to add in "digital/creative" as a second criteria (from the same criteria range) but I only want 50% of the result of these to be totalled.
is this possible?
View 6 Replies
View Related
Jan 6, 2009
I have a problem with writing a set of macros to automate a report.
I have been asked to automate a report that at present has the person to add data into column L which relates to the dates in Column M. the dates are in the full date and time format. eg 20/10/2008 9:07:18 AM.
For example, if the report is being run for December's Data, you would first of all need to delete any rows that contain any date after December 08, so any jobs that were raised this month, then in Column L he would add "Raised This Month" for any raised in December and "Previous Months" for any raised previous to December.
I have looked at a few diiferent ways to try this and none have even come close. It makes it harder that the month for the data will change every month.
So to sum it up I need to use the dates in Column M to affect the data in column L, also delete the row if column N is earlier than a certian date.
View 6 Replies
View Related
Aug 25, 2008
I am trying to get a count of cells that fall within a specific date range. In my case, I need cells from today and minus 6 days from now. e.g. last Friday until this Thursday. I do this weekly.
I can get the correct count of total entries for the period with:
=COUNTIF(($D$2:$D$10324),">="&TODAY()-6)-COUNTIF(($D$2:$D$10324),">="&TODAY())
But, I need to add more criteria. I need to add type and status.
For example...I need the count for that period that is type "Email" (there are others..Fax, In Person..) and status "Closed" and/or "Resolved".
I had tried SUMPRODUCT, but can 't get it to work.
I was looking at a formula like this:
=SUMPRODUCT(COUNTIF($D$2:$D$10324,">="&TODAY()-6)-COUNTIF($D$2:$D$10324,">="&TODAY())*($B$2:$B$10324="Fax")*($C$2:$C$10303="Resolved")*($C$2:$C$10303="Closed")
Is SUMPRODUCT the way to go, as I can't get it to work at all.
View 9 Replies
View Related
Jul 23, 2014
I have a start date column and column for status. Status is either "in-progress" or "complete". I want to count the number of "complete" items that fall within a specific date range. I have tried countif but I can only seem to get a count of all items that fall between the date range. I do not want a pivot table for this.
View 3 Replies
View Related
Jul 24, 2014
I have a date range that I'm trying to get a total count on. The criteria is any date in COLUMN I that is not "approved" in COLUMN L and the date is less than the current date which I have in cell U5.
[Code] ......
View 12 Replies
View Related
Dec 9, 2013
I have time-worked spreadsheet use to calculate the hours worked over a year, now I need to sum the hours worked during a given period if they happen to be on a public holiday. I have a column (say A) displaying dates from 1/1/13 till 31/12/13, another column giving the result of the worked hours (say B). I also have a defined list of public holidays which I need to compare with (named Holidays). The working year is "divided" in 13 periods of 28 days each (the last one having 29 days). I was trying to use the SUMIFS function (since i have other constrains that need to be met)
e.g. =SUMIFS(B1:B28,A1:A28,Holidays)
View 9 Replies
View Related
Jun 19, 2009
0 x
-2 x
-1 x
3 x
-4 x
1 max
5 x
8 x
9 x
1 x
I need to sum the 1st column from the bottom, to the same line of the max on the right column.
First thing i remembered =sum(xx:max(xx:xx)) but it doesn't work, i think because sum() does't allow any operations in its arguments.
Second was to store the line of the max and try to join the column and then sum them but =lin(max(xx:xx)) doesn't work either
Third i tried =sum.if() but i don't have much experience with this function.
Also i'm trying to perfect a SUM.IF with a DATE RANGE CRITERIA
instead of:
=SUM.IF(I4:I25,">=2009/1/1",R4:R25)-SUM.IF(I4:I25,">=2010/1/1",R4:R25)
why can't i use?
=sum.if(xx:xx,year(xx:xx)=2009,yx:yx)
or
=sum.if(xx:xx,year(xx:xx)="2009",yx:yx)
View 9 Replies
View Related
May 22, 2007
Attached is a really simplified version of what I'm trying to accomplish. I'll attempt to get my brain working well enough to explain it:
For each row, I have a person's name, their department, their site, and then a series of dates (representing dates of attendence). The four columns after the dates ("Counts" is the first) are me trying to keep all the right numbers in mind, and are the routes I've been trying to take on this. I have also tried to make a custom formula called ClassInRange, which isn't playing nicely.
What I eventually need to populate is the little 2x3 section at the bottom where the three sites and the two departments I'm working with (down from 5 sites and 8 departments for the sake of sanity). What I need to be able to do is populate those cells with something that will tell me how many people from which site and department have attended something within the date range.
So, for example, I need to know that the 2 guys in Wellesley attended something between January 1st and December 31st of 2007. (American date style, in case anyone's lost)
If you're able to help, please keep in mind that I'm not the end-user; I'm just the slightly crazy dude trying to create this thing and make it simple to use. Eventually, the Dept/Site box will be part of a template which is copied and pasted up to four times on a report sheet, each fed by different date-range criteria.
Also, the important information is the person's name, dept and site, which I hope gives some reason behind the organization; we want to find the person easily.
View 9 Replies
View Related
Jan 30, 2014
I am trying to find the median for a huge amount of data, so I have cut it down to just an example size. I have uploaded a copy of the example file.
I have three price ranges that I have to find the median for:
Under $5MM
$5 MM - $25 MM
$26 MM - $56 MM
I need to find the median for each price range for Signed units and Sold units. I also have to find a median within a date range (e.g. within the last six months) that includes the previous criteria.
For the first formula, I have tried using the following formulas:
=MEDIAN(IF($I$14:$I$34,"Signed",IF($F$14:$F$34,">="&0,IF($F$14:$F$34,"<="&5000000,$F$14:$F$34))))
=MEDIAN(IF($I$14:$I$34,"Signed",IF($F$14:$F$34,">=0",IF($F$14:$F$34,"<=5000000",$F$14:$F$34))))
(I remembered to do "CTL + SHIFT and ENTER" to make it an array.)
For the second formula, with the date range, I am able to find the total for the last six months, but not with a price range included.
The formula that I am using that works for the median of units Signed within the last six months is:
=MEDIAN(IF($H$14:$H$34="Signed",IF($G$14:$G$34>"07/31/2013"+0,$E$14:$E$34)))
However, once I try to find the price range, it does not work:
=MEDIAN(IF($H$14:$H$34="Signed",IF($G$14:$G$34>"07/31/2013"+0,$E$14:$EIF$34,IF($E$14:$E$34,">=0",IF($E$14:$E$34,"<=5000000",$E$14:$E$34)))))
View 2 Replies
View Related
Aug 19, 2012
The part in green will count the number of entries for the name Johnson & Freedman LLC perfectly fine. However when i add the last part in red i receive a #Value! error.
Col. W is formatted as General and has a data validation for the user only to choose Pass or Fail.
Not sure why it isn't working.
Code:
=SUMPRODUCT(--( 'SCRA'!B26:B29>=Sheet3!C2),--('SCRA'!B26:B29
View 8 Replies
View Related
