SUMIF Function But The Sun Range Is On The Left Side Of The Criteria?
Aug 19, 2014
I am trying to SUM the total task done per date. The problem is, (for the sake of this problem) the DATE is in Column B and the Task Total is in Column A. I know that SUMIF is not possible because the SUM RANGE should be always on the right side of the CRITERIA.
My question is, is there other formula other than SUM IF to figure this out? or I have no choice but to Interchange the data in a matter that SUMIF function will run.
View 6 Replies
ADVERTISEMENT
Oct 25, 2007
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies
View Related
Mar 1, 2014
I need function that swaps text from side to side. Text at the left of "x" should be placed at the right side of the "x" and from right to left side:
6x15 -> 15x6 plaah plaah xsomething -> somethingxplaah plaah How to do this?
View 4 Replies
View Related
Nov 22, 2011
Is there a way to show the Vertical axis on both right and left side of the graph or at least on the Right hand side?
View 5 Replies
View Related
Oct 7, 2008
I know there is some shortcut key that displays the + and - for expanding and contracting subtotals on the left side bar - so you don't have to use the new commands on the ribbon bar in 2007.
View 4 Replies
View Related
Feb 23, 2014
I have an excel spread sheet and on the last column on the right hand side I have some comment boxes but when I hover over them they pop up to the right of the cell, and then they are off the screen.
Can I alter it to make the comment box pop up to the left side of the cell.
[Code] ....
Is it possible to adapt this code to get me the desired results or will it have to be a separate one.
Also i'm not sure if I have the code right because if I run the macro then open a comment box in the (M) column as in the code the comment box is the default size then if I run the macro again once I have the little red tick in the corner of the it changes to what the code says.
View 4 Replies
View Related
Mar 19, 2008
I have a form where I want to change the color box on the left hand side see attached image. Now it is a static and I want it dynamic where the user chooses the color. Now it is constant using an image with the color green, red, blue, etc... I want a color picker so user can pick their own colors and when the color is picked the code will pick the color number.
View 9 Replies
View Related
Jun 9, 2009
I'm working with text cells I get this tiny indent on the left hand side of a cell about the size of one hit of the spacebar button.
Excel doesn't recognise this as an indent and I can't get rid of it. It's, pardon my french
View 9 Replies
View Related
Feb 8, 2008
Need a way to switch the default positioning of pivot table row totals? I would like to left justify them insead of always having the totals on the far right side where they are often out of view to the user without scrolling. I end up having to place 2 pivot tables side by side so that I can make the totals appear first.
View 3 Replies
View Related
Apr 11, 2012
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is:
Box Name Box Date ID1 ID2 ID3 ....
Where there is not a fixed number of IDs in each box
(There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
View 5 Replies
View Related
Apr 28, 2014
I am trying to get a SUMIF formula to work where the following: - RANGE = Column N:N (These are all a list of dates) CRITERIA = Cell C20:D20 (These are the dates i want to look at) SUM_RANGE = Column P:P
Basically, I want to SUM all the numbers on Column P where the date in Column N falls between and including the dates in Cell C20 and D20
In attachement, I want to show in the YELLOW cells the SUM of Column P where the Date in Column N is between the Dates in column C and D.
View 3 Replies
View Related
Mar 3, 2014
I'm looking for a way to write this:
[Code].....
as this :
[Code] .....
Where the criteria runs across a range (G to BG) that can sometimes have columns deleted, but the range must remain fixed.
View 3 Replies
View Related
Oct 10, 2007
I am trying to do a sumif function where it only sums when a different criteria is met in several different columns.
eg
sumif b:b shows portsmouth d:d shows calais f:f shows night then sum range g:g
View 9 Replies
View Related
Nov 7, 2008
Is it possible to compare two columns side by side to highlight/change color of difference between the two cells
I need to compare and show the changes to the record from previous version and generate a report which will highlight the changes (Rather than just saying that record has changed It should tell what has changed)
For example if the
Column 1 (Previous Version) :The structure contains Wire, Bolt, Stmaps etc
Column 2 (Current Version) : The structure contains Wire, Bolt, Stamps etc
Data Changed: YES
In report is should show two columns side by side and in Column 2 it should highlight "Stamps"
View 9 Replies
View Related
Dec 21, 2011
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
View 1 Replies
View Related
Jul 31, 2009
I have two sheets that need to have unique partial matches aligned side by side. My first sheet is my database. The righter most column of this sheet contains a unique combination of letters and numbers.
My second sheet contains a single column which I export each month from our CMS and is a list of URLs. Within each of these URLs appears the unique set of letters and numbers from sheet 1 (and only appears once).
There are about thrice as many URLs in sheet 2 as there are entries in my sheet 1 database.
Ideally, I would like the URL from sheet 2 that contains the unique combination from sheet 1 to be pasted in the cell immediately to the right of the given unique combination.
However, I will settle for a list of trues and falses next to the URLs in sheet two that I can erase the falses, sort and paste next to the sorted list from sheet 1.
View 9 Replies
View Related
Dec 22, 2013
I am trying to use a date range as a criteria in a SUMIF function. Below are the data and formula I am using.
Forecast
6
4
15
8
Week
1/12/2014
1/19/2014
1/26/2014
2/2/2014
Formula =SUMIF(G2:J2,">L1",G1:J1)
G1:J2 - raw data shown above. L1 = 2/2/2014. Desired result = 8. Result obtained with formula above = 0 how to make this work?
View 3 Replies
View Related
Apr 2, 2014
I am trying to do a sumif off all dates that fall into a specific year. I know I can do it by either adding a column in either of the sources to get the translated data but I was wondering if I can get this to work by it recognizing the format within the formula only.
View 4 Replies
View Related
Oct 23, 2008
Currently I’m using several formulas to acquire my result; I know it can be abbreviated to a more compact formula.
I have four Sheets. One summary sheet and SheetA, SheetB and SheetC containing Data.
All sheets are documented in an equal format, e.g.: in column A: Date, column B: Code (A, B, C or D) and Column C: values.
Criteria are located in the summary sheet e.g.: A2: 1-1-2008 A3: 2-1-2008 and B2: A, B3:B
The data sheets are listed in H1:H3.
The results should cover a sum of col C over the sheets by using the critiria listed in summary sheet.
The criteria range is variable; sometimes I only want to use one criteria and sometimes more.
View 9 Replies
View Related
Jun 3, 2009
i have 2 excel worksheets. One of them contains over 20,000 rows of entries (old side) and the other contains about 900 rows of entries (new side). Both contain the same 9 column headings. I've shortened the list in my workbook example.
What i need to do is excel to delete any row on the old side that is not contained on the new side. I don't need the rows to match fully but the column A's (Doc number) are what i want it to check against. I've included a summarised version of the database and the old and new are separated by a heavy blue line. Need to be left with the same rows on either side of that blue line at the end.
View 4 Replies
View Related
Feb 17, 2014
A B
17-Feb 5.00
19-Feb 12.00
22-Feb 7.00
26-Feb 10.00
I would like to see the sum of B given it is in the range from 17-Feb to 23-Feb. My estimations so far:
=sumif(A:A,????, B:B)
How do I set up a criteria which would take values from 17-Feb to 23-Feb?
I also tried =sum(sumif(A:A,{17-Feb;?;?;23-feb}, B:B) but it wouldn't let me.
Particularly the problem is in entering the date in the array.
View 1 Replies
View Related
Jul 28, 2014
I sum number of articles that are coming in on one sheet and articles going out on another. The total of In - Out is a separate value. All three values are placed on a third sheet.
The following code I use does the job, but I have to use a set range in the SumIf function. I want to be able to use a variable for the lastrow of a table colum.
VB:
Private Sub ArttotKnop_Click()
Dim Klanttel As Integer
Dim Rij, vLastRow, iLastRow As Long
Dim varResult, varMin, varTotal As Variant
iLastRow = Sheets("Ingebracht").ListObjects("Ingebracht").ListRows.Count
[Code] ....
Since my table grows larger every day I want to use variables.
Where I wrote A2:A500, B2:B500, B2:B550 and D2:D550 I want to be able to replace A500 and B500 with A and B + the variable iLastRow. The same for B550 and D550 with the vLastRow variable
Tried using:
.Range("A2:A" & iLastRow)
.Range("A2", Cells(iLastRow, 1))
.Range(Cells(2, 1), Cells(iLastRow, 1))
They don't work.
View 2 Replies
View Related
Dec 10, 2008
I'm trying to write some code that inserts a SUMIF function to a given range of cells:
In simplified form, the code runs as follows: ...
View 9 Replies
View Related
Jul 18, 2006
I am trying to use the SUMIF function in excel where I want to sum a range of cells greater than whatever is in cell D8. Here is what I tried to use, but it doesn't work. SUMIF(A2:A10,>D8,B2:B10)
The content in D8 can change because the user makes a choice from the drop-down list and a number pops up in D8 that is referenced to their choice.
View 2 Replies
View Related
Jan 6, 2010
I'm trying to figure out how some conditional formating and I cant get it to work.
What I want is for column H to be highlighted based on the value of column I.
So... If I2<721, then H2 will highlight green. If I2 is between 721&780, then H2 will be highlighted yellow. And if I2>780, then H2 will be red.
I know how to do it one cell at a time, but I need it to apply to the entire column based on the cell next to it.
Also, I dont have access to visual basic.
View 5 Replies
View Related
Feb 26, 2008
I have a sheet with a number of repeating blocks copied down.
I would like a macro that when I select the first block, say range "A1:D30", the macro will cut the blocks below and put them side by side, so that I can compare them across.
i.e cut "A31:D60" and put it in "F1:I30" and so on ...
View 9 Replies
View Related
Nov 22, 2008
I have created a spreadsheet that has information about networks, subnets etc..
The top header for both companies in (CSV format) reads:
Network Namenet_addr1net_addr2net_addr3mask_lengthorg_idcidrlast_upd_dt
I basically split the spreadsheet to show both side by side.
I have this information for both networks that I am trying to compare what subnets, names, IP address etc... over-lap.
We are merging two companies into one, and I need to identify or highlight what information on both companies over-lap.
View 9 Replies
View Related
Jan 8, 2009
I have columns A and B, and want to add values in column B based on corresponding criteria in column A. The criteria is if the first two characters in the string in column A = 15.
The only way I can think to do this is with LEFT, but LEFT asks for a specific string, and I want to evaluate each cell in a column. So I could write
=sumif(A:A,"LEFT(A:A, 2)=15",B:B)
but of course that doesn't work.
View 9 Replies
View Related
Nov 5, 2009
why a person such as myself cannot have two or more Excel Docs on the screen side by side at the same time? And if it can be done, how do you do it?
View 9 Replies
View Related
Apr 15, 2009
I have the following formula below to return "C" if the value in the cell is "C", and nothing if not.
I want to expand it to return "C" if the value in the cell is "C" or "D", for a range between C2:H2.
=IF(C2="C","C","")
I'm have trouble with this easy adjustment.
View 3 Replies
View Related
