SUMIF With Relative Range?
Dec 27, 2012
I have data headings in A1-E1 and actual data in A2-E2. I have a SUMIF function in F2.
A B C D E F
A B A B B
1 2 3 4 5 =SUMIF(A1:E1;"A";A2:E2)
When I insert new data columns between column E and F, the formula still refers to columns A-E although I would like to have the newly added columns in that SUMIF-function included.
For example, if I add 3 new columns, the new SUMIF-function (now in cell I2) should become =SUMIF(A1:H1;"A";A2:H2).
Do to modify the SUMIF-function to do that?
View 4 Replies
ADVERTISEMENT
Oct 25, 2007
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies
View Related
Jan 17, 2005
I have a spreadsheet with very long formulas that reference a whole lot of variables in the same column. I tried naming the cells so that writing of the formula is easier to do. However, I need to copy the column across for other entities of varying nature, and these copied cells refer to the same named cell. Can I name a cell and copy it sideways so that it retains some sort of name with allusion to the column that it is in?
Andrew van Gruting"
I have tried copying a formula with a named range and, as expected, it maintains an absolute reference. Is there a way that he might be able to copy but drop the absolute reference and copy with relative references. Can I place something in front - the equivalent to the $ sign, but rather a relative sign.
View 6 Replies
View Related
Jun 5, 2009
I have a workbook with a single worksheet. The worksheet includes some named ranges, which are used in a dynamic chart (so that when I add data, the chart updates).
I want to duplicate worksheet#1 so that I can have worksheets 2, 3, 4 etc.
Thus I can paste new data in the new worksheets, and have all my calculations done.
Naturally, the only probelm is the graph. It is using the named ranges from worksheet #1.
Is there a solution, so that I don't have to re-create my graphs on each worksheet? (each worksheet has varying numbers of rows, AND, I will be updating each worksheet with new data from time to time, thus the need for a dynamic chart)
View 4 Replies
View Related
Nov 25, 2007
I am updating a wsheet via a form using vb to locate next empy row etc.
The issue I have is with the formula's no matter how I try I cannot get the formula to increment with each row. I know I can drag and auto fill on the sheet but I want to use vb if poss. eg
Previous entry to sheet:-
A1=1
B1=2
c1=A1+B1(formula)
New entry via form selecting next empty.
A2=(updated from form.)
B2=(Updated from form.)
C2=(Update code VB)
This is all okay and functional the problem starts from here
I so far have been unable to increment the formula in c1 from A1+B1 to A2+B2 using vb, is this possible or am I just chasing my tail.
View 3 Replies
View Related
Jan 23, 2008
Here is my array code
Dim Values() As String
Dim count As String
count = 9
For count = 9 To 1800
Values(count) = "=IF(AND(E" + count + "<>"""",AH" + count + "<>0),(AH" + count + "/E" + count + ")*100,0)"
count = count + 1
Next
I'd make it a static array but eventually I'm going to have to set it up where I wont know the upper bound.
Here is the other part of my code that I don't know what I'm doing.
If Range("A9") > 0.01 Then
Range("AI9:AI1800") = 0.01
Else
Range("AI9:AI1800") = Values
End If
I keep getting mismatch errors on the count variable, but I need it to be a string so I'm not sure what do here.
View 9 Replies
View Related
Feb 13, 2008
I am using VB in Excel to write a formula for summing a column of numbers that will vary in length. I have been using the Indirect formula and have the start and end cells of the range identified in another location. My problem is, the macro in vb is sending the Indirect formula to the cells containing the start and end points by using relative functions ie. go across 30 columns and up 10 rows to get start cell. I wanted it to just save the cell location of the start and end points.
EG.
VB formula is: "= SUM(INDIRECT(R[-23]C[27]&R3C29):INDIRECT(R[-23]C[27]&R3C30))"
whereas I just want it to read "=Sum(Indirect(C4&D5):INDIRECT(C4&D6))"
where cell C4 gives the column letter and D5 the row number of the start of the range and C4 and D6 give the column letter and row number of the end of the range.
View 9 Replies
View Related
Apr 1, 2014
I am trying to create a formula to count a range relative to a dynamic reference (at least I think that's you would phrase it).
I thought I was on to a winner with this:
Formula:
[Code] .....
But it doesn't seem to accept the : as a legal operator.
I suspect the answer is to use SUMPRODUCT somehow.
View 6 Replies
View Related
Sep 7, 2009
I'm working on or any part of it on here, because the work belongs to my employers and would constitute the loss of trade secrets. It would also take me way longer than I have the time to invest to put together a functional duplicate of the relevant part of the sheet just to be able to post it.
With that in mind, what I'm trying to do is refer to part of a range that spans five columns (though it could conceivably span more in the future, so I'd rather not count on that detail) and a constantly changing numbers of rows. The part I want to refer to includes all columns, and all rows except the first and the last in the range.
View 5 Replies
View Related
Mar 8, 2013
I have a data that is split into multiple cells and needs to concatenated. Unfortunately, the number of columns wherein lies the data varies throughout the workbook. As such, I wanted to select a range of cells, define this range as the reference point for the macro, run the macro, then move on (selecting a different number of columns on the next try).
For example, I have this:
A
B
C
D
E
1
No
Not Very Far
[Code] .....
I want to select cells A1:B1, run a macro concatenated the two columns, then select cells C1:E and run the same macro to get this:
A
B
1
No
Not Very Far
[Code] ........
So far, I have this:
Code:
ActiveCell.Columns("A:A").EntireColumn.Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
ActiveCell.Offset(5, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=CONCATENATE(RC[1],RC[2])" '
View 9 Replies
View Related
Dec 11, 2013
I'm trying to use relative references and am have having trouble with selecting a range for the fill down command.
I'd like to copy a formula down in the last column from row 1 to the last row with data. Column D is static so I can always use it to find the last row. The last column will vary; sometimes it might be G another time it might be X. I'm able to get the formula entered into the proper cell but I can't figure out how to select the range for a fill down.
If I was not using relative references and cell X1 always had the formula then Id code it like this:
'*** Find last row with data
Range("D1").Select
LastRow = Range("D65536").End(xlUp).Row
'*** Calculate length of cell in previous column
[Code]....
It's the last range statement that stops me. I haven't come up with a variation that allows me to select a range from the cell on the first row of the last column and select the last row with data for the same column.
View 3 Replies
View Related
Nov 4, 2008
I've been trying to get the sum of a range of cells based on their relation to the active cell. Here is the Pseudo
If the SUM of (the cell 2 rows up THROUGH the cell 2 rows up and 2 columns to the left) = 0 then .......
*****end pseudo
I think that activecell.offset is the best way to do it, but I can't figure out how to work that in a range....
Here is my code so far:
Worksheets("Generic SPC").Activate
Worksheets("Generic SPC").Range("c2").Select
'Do for all cells in the row
Do
ActiveCell.Offset(0, 1).Select
If Application.WorksheetFunction.Sum(Range( _
ActiveCell.Offset(-2, 0), ActiveCell.Offset(-2, 2))) = 0 Then
ActiveCell.Value = 0
ElseIf Application.WorksheetFunction.Sum(Range _
("ActiveCell.Offset(-2, 1), ActiveCell.Offset(-2, 3)")) = 0 Then
ActiveCell.Value = ActiveCell.Offset(-2, 0).Value
Else: ActiveCell.Value = 0
End If
Loop Until IsEmpty(ActiveCell.Offset(0, 1)) = True
******End Code
Range doesn't like activecell.offset. Does anyone know how to do this?
View 9 Replies
View Related
Sep 22, 2007
using a macro im trying to paste in a sum formula, however this will be pasted onto different sheets and the number of records will be different for each so i cannot use absolute locations. the only constant is that all ranges will start in row I9. when it runs the following code
Range("G" & (ActiveCell.Row)).Select
ActiveCell = "Total"
Range("I" & (ActiveCell.Row)).Select
ActiveCell.FormulaR1C1 = "=Sum(I8:R[-1]C)"
Range("J" & (ActiveCell.Row)).Select
ActiveCell.FormulaR1C1 = "=Sum(J8:R[-1]C)"
Range("I:J" & (ActiveCell.Row)).Select
Selection.Copy
Range("I4:J4").PasteSpecial
it fills in =SUM('I8':I13) how can i make it insert it without the ' ' around the I9? and how can i select the two cells? (again, cannot be absolute..)
View 3 Replies
View Related
Oct 31, 2006
I would like to select a range of cells relative to the current cell and move them to the right two cells. Basically, if I were in cell A1 I want to be able to have a macro select A1 - A8 and move them over by two cells leaving A1 and A2 blank.
Excel 2003
View 9 Replies
View Related
Jul 20, 2006
eg say you call (ie insert a range name) cell A1 "firstcell", B1 "secondcell", then A2 "divisor1" and B2 "divisor2". if you put a formula in A3 which is "=A1/A2", how do you copy and paste this formula into B3 but getting the formula to reference B1/B2 rather than firstcell/divisor1, as it does by default?
View 2 Replies
View Related
Mar 5, 2007
I need to change multiple conditional formats which apply to cell ranges 1 row x 17 columns wide. The specific change I am making is able to be acrried out with the code
With Selection.FormatConditions(1).Font
.ColorIndex = xlAutomatic
End With
However, I dont want the user to have to manually select each 17 cell area. I WANT THE USER TO JUST MANUALLY SELECT THE FIRST OF THE 17 CELL AREA. I want to write a macro that will THEN select a row of cells, 17 cells long, from the MANUALLY SELECTED position as at the moment of running the macro. Unfortunately the cells are not always on the same row in each sheet. On one sheet they may be on row 5, on another row 8 and on another, row 15 etc. I was wanting to be able to select a 17 cell range 'relative' to where the cursor is. How do I write the code to select the relative cell range? Is there an answer in an R[1]C[1]:R[1]C[17] sort of code?
View 7 Replies
View Related
Sep 27, 2007
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit
Sub Average()
Dim R As Integer
Dim help As String
Dim Range1 As Range
Dim E As Integer
Dim Avg As Integer
R = 1
'/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE
Sheets("UXP data").Select
'Sheets.Add
Sheets("UXP data").Select......................
View 2 Replies
View Related
Apr 30, 2008
I am using Excel 2007.
I am using the coditional formating to highlight whether a date contained in particular cell is within 12 months of todays date or over 12 months in the past.
This is done by placing the =TODAY() in a cell at the top of my sheet and then in another cell, doing a DATEDIF calculation between the two and this works fine. I can then specify in my conditional formating to turn the cell containing the date a funny colour if the cell doing the DATEDIF calc is > or < 12. Simple!
What I can't do is copy this formatting for the other 30 rows of dates I have. When I try and copy them, it references the original cell, not the one for that row. Example: If my date I want to test is in B2 and my DATEDIF clac is in U2, when I copy the coditional format to the new row, say B3, the new rule still references U2, not U3. I understand about dymamic and static references and I have removed the '$' signs from the formula.
View 8 Replies
View Related
May 26, 2008
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies
View Related
Jun 10, 2008
I have a formula that works fine in the cell of an Excel spreadsheet but I'm struggling to translate it into VBA (your help please).
The cell formula is:
=If(B2="", "", B2 & " (version: " & F2 & ")")
I want to iterate through all rows in my spreadsheet (about 2000) incrementing the relevant row numbers in the formula @ each pass - eg changing B2 -> B3 -> B4 etc and F2 -> F3 -> F4 etc where column 'B' contains the name of the product and column 'F' contains the version number, resulting in "Product Name (version: 123)" per row.
The closest I've got to this is:
Sub LookupNameInColumnA()
Range("A2").Select
Dim i As Integer
For i = 1 To Selection. CurrentRegion.Rows.Count - 1
ActiveCell.Formula = "=IF(B2="""", """", B2 & "" Version: 999"")" ' problem line?
ActiveCell.Offset(1, 0).Select
Next i
End Sub
This works OK'ish but I want each line to reflect the different data per row. I'm struggling to increment row 'B' and row 'F' in the formula, having tried "B & i + 1" and "F & i + 1" but am getting confused with quotes and concatenating strings within formulas.
View 5 Replies
View Related
Mar 16, 2008
Is there a way to absolute reference multiple cells at one time?
View 5 Replies
View Related
Oct 24, 2013
I'm creating a Macro to paste a series of formulas from a template in hidden rows above to cells further down in the same worksheet. My code works fine if I set an absolute range as the Destination - here's a portion of it:
Sub TimelineRow150()
Dim TimelineMatch As Integer, ProjectPlan As Object
TimelineMatch = ActiveCell.Offset(0, -1).Value
If TimelineMatch = 26 Then
Range("E26:AQ28").Select
[Code]....
I'd like to be able to copy and paste this code to run it multiple times in the same worksheet, (the TimelineMatch variable actually has 26 different options). Is there a way to replace the [Range("E150:AQ152").Select] portion of the code with a range that is relative to the Active Cell? (I'd instruct users that cell E be the Active cell before running the Macro, and E to AQ is still the range I need the copied data to appear.) I've tried using ActiveCell.Offset, but I keep getting an error of Method 'Range of Object' _Global' failed.
View 3 Replies
View Related
Jan 6, 2009
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.
View 3 Replies
View Related
Sep 14, 2013
I'm looking to build a football data sheet on matches played with a column that adds up the last 3 match goals for the team in that row. I've only managed to get as far as adding up all goals for a team in a static date range using SUMIF. I imagine this is more complex and requires some kind of changing sum range that's relative to the cell I'm in.
I'm intermediate at best so any array formulas and VB script would preferred to be avoided if possible.
in the watered down example below, I'd like to add up all home team goals for Hereford in the last 3 matches, therefore excluding the game on the 10th (row 1) giving a total of 5. I'd like this formula to copy down from a13 to future matches and therefore update. So the next week's match will add goals for hereford from e13,e11,e8 but exclude e2, e5. Yes you've guessed it... I'm trying to work out recent team form to predict match outcomes for financial gain...
View 4 Replies
View Related
Apr 12, 2009
I have come across this SUMIF formula which sum a range and ignoring errors produced by formulas in the range, I can't figure out how this works and need the expertise of the Excel experts here. =SUMIF(A2:A9,"<1E100"). What does "<1E100" represent and how its work
View 2 Replies
View Related
Nov 1, 2012
I am currently recorded a macros for a sumif formula. But since the number of rows will not be same every time.
I want the code for a dynamic range.
VB:
Range("E7").Select
ActiveCell.FormulaR1C1 = _
"=SUMIF('V1 Pivot'!R5C2:R32C2,'Task Level Tab'!R7C2:R30C2,'V1 Pivot'!R5C3:R32C3)"
Range("E7").Select
[Code] ....
View 9 Replies
View Related
Jan 8, 2006
Range:
C3,C14,C25,C34,C41
Criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the function off.
View 14 Replies
View Related
May 8, 2009
I'm trying to built a range to be used at SUMIF. I have the sheet names at column A:A and want to create something dynamic to avoid selecting sheet by sheet all the neccesary ranges but sumif doesn't recognize a range like A1&"!"&B:B for example. I tried different ways but I can't get it!
View 2 Replies
View Related
May 8, 2009
How do I sumif the date falls between two dates in a quarter.
For example Date of Activity - CellBG43 = 10/10/2008
I want to sum the corresponding Cell BJ43 with cost associated with the activity if the date falls between "01/10/2008"and "31/12/2008".
I tried =sumif(BG43,">=01/10/2008 and <=31/12/2008",BJ43), =sumif(BG43,">=01/10/2008 & <=31/12/2008",BJ43) and it didn't work.
View 3 Replies
View Related
Jun 18, 2009
I have a large spreadsheet, to which I add 4 weeks worth of data, from a database printout, (cut n paste) to the bottom, this could be any number of rows. However there is a column with week numbers in for each row. I can happily use =SUMIF('FORM R60'!$H$1:$H$1248,$A1,'FORM R60'!$AH$1:$AH$1248)
This gives me the info I need on a TOTALS sheet, across various columns and rows, where the formula sits, adjusted for whichever column of data I require totals. This info is then read by another spreadsheet.
However, rather than manually change the formula (to suit a range) to add certain numbers of weeks, as I do now, I would like to include in the formula a condition say where the week numbers are >5 and <10, preferably if the condition could refer to cells.
View 4 Replies
View Related
