Row 10 contains a dropdown list and a value that needs to be givin in. I would like to create a hyperlink that activates a macro.
That macro should: Copy the row with the dropdown list and paste it under the last one.
So for example if you click the hyperlink once, it should add it to row 11, if you click it again, it should add it to row 12.
I'm reading a hyperlink into a spreadsheet using an =index,match,match formula. The Hyperlink appears as the correct one when you read it in the cell, but it does not link to that address....
View 8 Replies View RelatedI have a workbook that has 2 worksheets. Sheet1 has a data table that is filled from an SQL database. I would like the first column of the data table to have each cell be a hyperlink. The destination of the hyperlink is Sheet2, cell A2. I would like to modify the hyperlink, so that when the user clicks on the hyperlink, the text-display of the hyperlink is copied into sheet2 cell A2. Initially, I thought this was simple. I added the event code shown below:
[Code] ........
This worked, however there was a problem. I manually added the hyperlink to all cells in column1 of sheet1. However, this made the TextToDisplay property the value of the first cell for all hyperlinks. So, solution to add hyperlinks to all cells in the first column, with TextToDisplay property set for each individual cell. What is the best way to do this with the fact that the number of rows in column1 will vary as the size of the SQL query changes?
I am trying to write a macro that activates the following funtion in cell D1.
=HYPERLINK("#"&C2,"")
I have recorded the following macro but it only jumps to the cell the function is in rather than actually activating the function and jumping to reference which has been selected in C2.
Is it posible that when data or text is entered into a cell and the enter key is pushed that this can either run a macro or activate a hyperlink to go to another worksheet for user to follow further instructions?
OR instead of going to another worksheet a pop up message appears with instructions and then can be OK'd to remove message and proceed?
With Excel 2000 Hyperlinks to other locations in a Workbook such as an Index to other worksheets can be achieved (executed) with the Enter Key. When using the same file in Excel 2003 the only way to execute the Hyperlink is by clicking with the Mouse.
Is there any way to get Hyperlinks to operate the same (with the Enter Key) in Excel 2003?
I would like to copy and paste the hyperlink in Cell A1 to A2. Not sure how to do that w/o pasting the values in cell A1 as well.
View 7 Replies View RelatedI'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I am trying to link the values between two sheets in the same workbook.
Sheet1 is a unique list of names. Sheet2 is non-unique list of names.
I am trying to link the values on Sheet1 to where they first appear on Sheet2.
I can do this manually with the Paste as Hyperlink. I am assuming there is a formula or VBA solution for this?
I tried this:
=HYPERLINK(Sheet2!(VLOOKUP(A1,Sheet2!A$1:A$10000,1,False)),A1) but am getting an error.
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
I have an excel spreadsheet with a column for hyperlinks. Any information added into that column needs to be a hyperlink. How can I format the entire column so that when a user cuts and pastes the text will automatically turn into a hyperlink?
View 9 Replies View RelatedUsing excel 2010 on PC.
Paste URL as Hyperlink: I just want to paste a bunch of urls into a spreadsheet and have them automatically formatted as urls. i've checked my auto-correct options, and i have selected the checkbox that says: replace as you type/internet and network paths with hyperlinks.
See attached. if you copy and paste a url into the spreadsheet, it will be formatted as text.
Format Existing URLs as Hyperlinks : the attached spreadsheet contains urls that have been copy & pasted. is there a way to format them as hyperlinks all at once?
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
I have a master sheet and various other tabs with IF statements where if certain cells on the master sheet contain my predefined criteria they pull over all the data from that line on the master sheet.
Here is the formula:
However data in A is hyperlinked - how can I ensure that carried over to the other tabs as a link?
=IF(AND(Master!$V:$V="January",Master!$U:$U = "Y"),Master!A2, "")
A2 data is a hyperlink
I have a hyper link in cell A2. Value of the cell is "1st link" and hyperlink address is "[URL] .....".
Now I want that valu of B2 cell will be "[URL] .....". I want to do that work in vba.
I am trying to copy a table from webpage including hyperlink, so far i was successful to import table from webpage to excel, but in that i have hyperlinks, i want that hyperlink as well, how to proceed.
Code:
Sub TableExample()
Dim IE As Object
Dim doc As Object
Dim strURL As String
strURL = "HERE I USED MY URL"
' replace with URL of your choice
Set IE = CreateObject("InternetExplorer.Application")
[Code] .......
I have a large list of values that only 1 value will be select at a time. I want to be able to click on the cell and have the value in the cell copied to another cell. Exactly like a link, but I need the data to go with it. In this case, a drop down box won't work.
View 5 Replies View Relatedhow can I copy and paste only the hyperlink of one cell to the other cell with the same worksheet or workbook? I am using Excel 2010.
View 9 Replies View RelatedI have created a Macro that lists and creates links of all the Excel Documents in a Directory (500+). I would like to extract from each of those files data from a single cell on a certain sheet. (The sheet and cell are the same in each of these files). The code I have written opens each of these files, copies the data and pastes the value in the column next to each sheet. This is a very time consuming task because of the shear volume. I feel that there is a better way to do this, I'm just not seeing it. If you could come up with a way to create this as a reference that would be great too instead of having to rebuild the entire list if the data changes. Here is the code I have written.
Sub Test2()
' Select cell A1, *first line of data*.
Range("A1").Select
' Set Do loop to stop when an empty cell is reached.
Do Until IsEmpty(ActiveCell)
Selection.Hyperlinks(1).Follow NewWindow:=False, AddHistory:=True
Sheets("Contact Information").Activate
ActiveSheet.Range("B8").Select
Selection.Copy
ActiveWindow.Close
ActiveCell.Offset(0, 1).Select
PasteSpecial zlPasteValues
ActiveCell.Offset(1, -1).Select
Loop
End Sub
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
