Search And Return A Value
Dec 17, 2008
In the attached file, I am trying to lookup what vendor is assigned to a part, and enter the vendor number in column J, K or L, depending on the number that is assigned.
For example, the top part number, RAD001, has a 2 in column N, indicating vendor # 015354 is the Alternate vendor # 1. It has a 1 in column V, indicating 034180 is the Primary Vendor, and it has a 3 in column Z, to indicate that 015229 is the Alternate Vendor # 2.
What formula would I need to put in cell J2 so that if a 1 is found in row 2 it will return the value 1 position left of where the 1 is found? I will then put a similar formula in columns K and L to return the vendor number if a 2 or a 3 is found.
The end result will be that for each part number you will be able to see what vendor is primary, alternat 1 and alternate 2. I want to make this a formula because the actual sheet will be thousands of part numbers long, and I will need it to update the vendor information if the primary vendor is changed.
View 6 Replies
ADVERTISEMENT
Jun 18, 2014
I am trying to search a sheet for a given name and return the total point for that marking period. The main problem i am having is that the names aren't in the same cell on each sheet. It is a list of students and each sheet represents a marking period.
I have attached the file
View 3 Replies
View Related
Apr 13, 2008
I'm attaching a spreadsheet in order for you to understand my question, and I will explain it based on that, ok? I apologize in advance for english mistakes, since it's not my 1st language. I want to search the salary value in column B and, in Column C, I need the job title to be posted based on what is written in Column J.
The table h2:i8 contains the maximum salary a person on that position can earn. So when you look the salary on column B, it should seach in column H and compare to the maximum value, and return the description on Column I that corresponds to that salary range. So if somebody earns 6500, it should be qualified as a supervisor, because its salary maximum is 7100. I have searched the forum here and found similar problems, with suggestions to use vlooup and Index. But I just can not figure it out.
View 2 Replies
View Related
Jun 25, 2014
I have a formula which I took from another post to return a particular value in a specified cell as follows;
=INDEX(A1:E9,M3+MIN(IF(A1:E9=K3,ROW(A1:E9)-3)),N3+MIN(IF(A1:E9=K3,COLUMN(A1:E9)-1)))
However I don't understand what the -3 and -1 does and I believe it is these entries that are causing the error.
See attached file : TEST.xlsx
View 13 Replies
View Related
Mar 26, 2014
I have a sheet named formula the column highlighted in orange will be used in searching to the other sheet which is the table, I try to used the formula VLOOKUP but it didnt work.
View 5 Replies
View Related
Feb 2, 2010
I would like to summarize all "yes" respose contained in 15 tabs. See the attached.
I would like results to be returned to the "summary tab" when user answer "yes" in the signficant column in the "process activity 1 through 15" tabs. If the answer is yes, I would like to pull the process name, aspect and impact detail.
View 14 Replies
View Related
Feb 14, 2010
I'm looking for a Formula in order to retrieve all addresses of all matches equal to the search criteria located in cell: E2
The results are hand-typed in col. G
This is a case of a TWO-DIMENSIONAL "Arbitrary Lookup" Arbitrary.
The range A1:C10 was named: TBL and the formula should refer to TBL as it can be dynamic in size.
PS: can anybody tell me why I don't get any E-Mails when an answer is posted?
View 13 Replies
View Related
Dec 8, 2009
If I have a 'key' value in a cell in one sheet, i want to use that value to find the cell in another sheet containing the 'key' and return the row number of the cell, if more than one value then I would like to be able to loop through all the rows containing that 'key' value returning the row number of each hit, kind of a programmatic version of vlookup?
View 8 Replies
View Related
Jun 13, 2006
I have a list of product numbers in col. A. In col. O I have a list of file
names that contain the product numbers as well as additional characters. I
need a formula that will search col O for the first instance of the text in
cell A2 and return that value.
The next formula will return all instances that contain the text found in A2.
View 12 Replies
View Related
Jul 20, 2009
ok I have multiple columns where Col-A can have any number between 1 and 5. Col-B has a 3 digit number in it. i want to search all of column A and determine if there is a 1 in it, if so i want it to print the value of col b into a specified area.
here is an example of my form.
COLA | COLB |
--------------
1 | 324 |
--------------
2 | 325 |
--------------
1 | 327 |
---------------
this is basics, i will be using this to search col-a, determine what number is in the column, then print the number found in col b, on another page in a specific place, on the other page i have squares labeled 1-50. in a grid pattern, 10 squares per row. im trying to get all the entries in col-a, that are a 1, to put whatever value is in col-b in the first box of the grid, whatever is found in col-a with a 2, the value found n col-b of that row, into the grid box labeled 2 etc......
View 2 Replies
View Related
Jul 31, 2013
I need a formula that will search for the value of C1, Sheet1 in Sheet2 then if found, return a value from that row in column D? If not found then return a message "search emails".
I can upload a dummy if that's possible?
View 5 Replies
View Related
Apr 5, 2004
I am trying to search a range for all of the nonblank cells, when I find one, return the column header and the value in that column. Vlookup won't work on this. It will only return a specified column.
Employee performance
ID area one | two | three
12947 23 | | 19
12948 32 | | 20
12948 |17 | 52
What I am trying to do is create a communication sheet. Employee ID 12947, your performance in area one= ______, in area two = ______ and so on.
View 3 Replies
View Related
Apr 29, 2007
i want is to create a search engine in excel that allows users to input the clients name and the search will return all the info on the client such as the issue and their policy number.
Is this even possible? Using Access is not an option. I know I can use Access but most of my users dont know how to use Access and I want to make things as simple as possible.
Thanks so much in advance who ever succeeds at provding an answer u're a genius cuz I have no clue where to start lol.
View 9 Replies
View Related
Jan 10, 2008
I'm using a Textbox macro to search my database for a specific date, and return the company name of all entrys for that date, into a ListBox.
Now this is the only way I'm prepared to look at doing, and I have managed to do it...... partially - as stupid as it sounds, I cant get multiple results to list in the ListBox itself, and for the life in me I cant find out how to do it.
Also, once the options have been brought back into the ListBox, I then need code which will then populate further locked TextBox's which the rest of the company info, when selected from the ListBox.
I know its asking alot (or maybe not) but I believe, (unless ive done it a really awkward way, I'm not too far away, I just dont know the code to enter, to be able to do it.
Private Sub CommandButton1_Click()
Dim Nullstring
Application.ScreenUpdating = False
If TextBox1.Value = "" Or Nullstring Then
MsgBox "Please enter a date to search for"
GoTo error1:
End If.....................................
View 9 Replies
View Related
Mar 3, 2008
i'm writing a few VB subs to help manage a database of mishaps, solutions and lessons learned, there are 11 columns and each databade entry has a separate row, there are approximately 1,000 rows.
Columns are:
ID- a unique iderntifier for each entry- integer
Date- date the entry was made- date
Project Number- a reference to an internal project file- string
Operator- company we were working for- string
Installation- where the work took place- string
Category- type of problem encountered- string
Application- field of problem encountered- string
Issue- string
Background- string
Problems- string
Lessons Learned- string...........
View 9 Replies
View Related
May 8, 2008
I have a value stored in variable A. I need to search one column for the location of that value and return the row value. there is no chance for a duplicate entry. Is a loop my only option, or is there a find command in VB?
View 9 Replies
View Related
Jul 8, 2008
I have a workbook with two worksheets.
On Sheet1 I have two columns 'Date' & 'Serial Number'
I want to search the 'Date' column for entries that contain todays date & then display the corresponding 'Serial Numbers' in the first column of Sheet2.
View 9 Replies
View Related
Apr 7, 2009
Imagine the columns below are labelled A - D. Is there a way to search for the value 'SPLT' and return the value in column D?
Great Scot Dried Peas 3610.6366
GT SCT GRN SPLT PEAS480.151
GT SCT MRWFT PEAS1230.2158
GT SCT SPLT PEAS 1900.3157
Haven 370.10
View 9 Replies
View Related
Sep 24, 2009
0000AAAAABBBBBCCCCCDDDDD
1111SugarRaisinDirt
2222MilkWaterWaterFlour
3333FlourSugarDirt
4444EggsWaterFlourSugar
5555WaterMilkDirt
I looked for a way to represent my data in a cleaner way than this but couldn't find any tools....a point in the right direction would be helpful. I guess the old plug-in that converted Excel->HTML isn't available?
Column A is a finished product and B-D are the ingredients to make it however values in Column A are also ingredients (sometimes multiple times). I want a formula that searches for values in Column A within the table B1:D5 and returns an array, if possible, of the finished products where Column A was used.
For example, searching for Sugar would return "Flour, Water". Searching for Water would return "Milk, Eggs" (I'd rather not have Milk listed twice but beggars can't be choosers).
View 9 Replies
View Related
Oct 17, 2006
I'm trying to create a spreadsheet using several others in several different formats. What i need to do is search for a text string eg "EVP" in one column and return the numerical value of the cell in the column next to it - then sum all the values and create a table in the new sheet eg.
EVP sheet1!(value)+sheet2!(value)...etc...
View 3 Replies
View Related
Sep 21, 2007
I have a bunch of quotes in Excel format which have 5 columns ; Part number, Description, Qty, Cost, Total Cost, Unit List,Total List. I need a piece of code to open many excel files, look for a "part number" beginning with ED,DS,AP,MP or MDS and return the corresponding value in the "total cost" column then record the value in a separate spreadsheet.
View 2 Replies
View Related
May 12, 2014
I want to search within cells A4:F25 for "B71 - Brown" and show the number that is in the cell below this text. If there is multiple cells with "B71 - Brown" I would like the cell to show the total.
So for example,If the formula was looking for "B71 - Brown" in the cell it would show 8136. (A13+A21+D25+E17). If i changed it to "Lavender" it would show 2380. (C5)
Also this data is linked from several other sheets and the values i search for will change and will need to update.
View 1 Replies
View Related
Jun 9, 2014
I'd like to extract the data from Sheet 2 (Data) that falls within the selected date range but the formula I've entered in F$9 (see below) is giving me an error
=IF(ROWS(A$9:A9)>$A$5,"",INDEX(Data!A$2:A$387,SMALL(IF((Data!$A$2:$A$320>=$A$2)*(Data!$A$2:$A$320<=$B$2)*(Data!$B$2:$B$320=$C$2),ROW(Data!$A$2:$A$334)-ROW(Data!$A$2)+1),ROWS(A$9:A9))))
test1.xlsx
View 3 Replies
View Related
Jun 9, 2014
Want to look in one column and find the first non-blank numerical value, then have it return a value from another column.
Used to nest multiple IF functions together from different cells, but it seems overly complicated and time consuming. Sometimes I have over 30 cells to check.
For example, if Column A contains weekly sales data by week, entered weekly, and Column E has corresponding comparison data from the previous year. I want to enter a formula to check the first row that has sales data entered and have it match up the comparison value in the other column.
View 7 Replies
View Related
Mar 6, 2014
i wish to have a result of the below.
there are random dates in a column say D6:D17 in the format of (10/02/2014), there could only be one date in this column array or there could be several, like:
1/02/2014
12/04/2014
17/06/2014
5/12/2014
i also have an aray below this in cells D19:D30 With the "A" column showing the months Jan to Dec.
i wish to look the array of D6:D17 and populate the below cells corresponding with the months only, see example below. the reason for this is i wish to then turn the cell green with conditional formatting if there is a date in that month fro the original array.
Date10/02/2014
Date10/04/2014
Date10/06/2014
Date10/08/2014
Date10/12/2014
[Code]....
View 6 Replies
View Related
Jan 9, 2009
I have a spreadsheet containing several names. I want a formula or macro that will search a string of text within the cell. If the text exists within the cell, I need a code to populate. For example,
In cell E2, search for a phrase anywhere in the cell that contains "COM". In cell H2 look for the exact phrase "ASB". When "COM" is found in E2 and "ASB" is found in H2, in cell U2 return the value "COM ASBTVL".
In my case, E2 may not contain "COM", it may contain "DEN" instead. In that case, if E2 contains "COM", and if "H2" contains "SVC", then in U2 populate "COM APPSVC"
I'm guessing in my code I will need to list a set of criteria that will search row by row and return certain values when finding the text I specify.
Would a macro be best for this? Does anyone know how I would put that together?
View 11 Replies
View Related
Sep 14, 2009
How can I search a range of cells that have a date entered by hand for a certain month and then sum the amounts given in another range of cells. For example, search several worksheets for payments made in September and then return the sum of those payments.
View 3 Replies
View Related
Nov 10, 2009
I have been working on a variation of this for a long time and I cannot get it to work.
I am trying to depending on the textbox selection get the proper ROW from DEALLIST to show up.
View 2 Replies
View Related
Jan 28, 2014
I'm trying to come up with a VBA function that would return cell values based on another cell value.
I can do this by comparing a range (column of cells) with the cell value to match and then return the value of the cell next to it.
For instance,
The function should search a column for partial text, as follows:
TS ID
PDT ID
TS 1.1
PDT 1
TS 1.2
PDT 2
TS 1.3
PDT 3
TS 2.1
PDT 4
TS 2.2
PDT 5
TS 3.1
PDT 6
TS 3.2
PDT 7
In the above table, the function should for partial text and return string as follows:
TS covered
PDTs
TS 1.1, TS 1.2, TS 1.3
PDT 1, PDT 2, PDT 3
TS 2.1, TS 2.2
PDT 4, PDT 5
TS 3.1, TS 3.2
PDT 6, PDT 7
So basically I am searching for partial text TS 1. and so on
View 4 Replies
View Related
Feb 15, 2008
I have a workbook that has rows of data starting at A5:G5 seperated in groups of 25 rows.
Example: A5 is numbered 1 and A6 is 2 A7 is 3 and so on to 25 then skip a row and start numbering again to 25.
What this is for is employees are placed in groups of 25 to be eligible for an award for safety.
What I want to do is Range G5:G650 is to be a place where an "X" is placed beside an employee who has had an accident then Range H5:H650 would return "Employee had an accident" I already have this part working.
Then I want to code a subroutine that would search for the "X's" and return the entire row data for each name in that group of 25 on a seperate worksheet.
This would then be printed so we would know which group's to exclude.
I know how to make it return the row of data containing the "X" but how can I make it grab the entire group?
There will be multiple groups of 25 each and each time an "X" is found within a group create a new worksheet for that group.
650 employees / 25 = 26 groups
View 14 Replies
View Related
