I have a sheet named formula the column highlighted in orange will be used in searching to the other sheet which is the table, I try to used the formula VLOOKUP but it didnt work.
View 5 Repliesi have a large table and i need separate x and y coordinates(to plot on a graph) of a particular repeated value that is known to me in a large table of numbers. how can i do this?
View 4 Replies View RelatedIf this has been requested already, I apologize, please direct me to the right thread and flog me with USB cable. I've been searching the forum for an answer for a couple of hours now for the answer to this:
I have a list of words in column A on a sheet and I'm trying to write a formula on another sheet that will check all cells on a pre-populated row and return a value if any of the words from the list on are contained in any of the cells in the row. I've attached an example spreadsheet
Create a macro button in 'Spreadsheet 2' that searches 'Spreadsheet 1' for updated information specific to a certain criteria and adds it to a new row in 'Spreadsheet 2.'
There are three sheets
Prospects (where all original data is entered)
Actions -Bob (Bob's new Prospects are added to this sheet)
Actions -Frank (Frank's new Prospects are added to this sheet)
So in this example Row 6 in Prospects (Constituents, Rating, Manager and Solicitor would be added to ACTION - Bob's sheet on Row 5
and
Row 8 in Prospects (Constituents, its Rating, Manager and Solicitor would be added to ACTIONS - Frank sheet on Row 5
Here is the example spreadsheet - Prospects and Actions.xlsx
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View RelatedI have a workbook containing multiple sheets for documents issued to manufacturers. I have a summary sheet which contains all of the documents and I would like to be able to look up a document number against all the sheets, and return the name (or names if multiple finds) of the sheets containing this document.
I have got close to solving this by finding another post[URL] .... but I believe this doesn't work because it searches on values rather than matching text.
I have attached a simplified example file with the sheets to search being Fab 1, Fab 2 and Fab 3, and the formula need to go into column B of the Main Sheet.
Example for Ozgrid Forum.xlsm
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
I've got an Excel document with over 323 entries and I need to search the data to find where ever a certain keyword is mentioned and copy the entire row into a separate sheet within the same workbook. However, I have a list of around 323 keywords and there is AND condition as well.so doing this using Ctrl+F would take some time.
The data is in Sheet "Training Dataset" and the particular column that needs to be searched is Column "A" . "Training Dataset" is the sheet where I would like the found results to be copied to in the column B and C. The list of Keywords that need to be searched for are located in Sheet "Keywords" , starting from Cell C and D.
i have a workbook with several sheets in it. i would like to make a userform were i could put a number in a text box eg E045698.then use a command button to search all the worksheets for that number and display the sheet number where that number is in another textbox.
View 5 Replies View RelatedI use the following formula in excel 2007 (and it's working perfectly in 2007) but this formula does not work if I work with the same file in excel 2003 ...w why and what I have to adjust?
=IF(SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B))=0;"not found";INDEX('sheet 2'!D:D;SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B));1))
(I'm working with the dutch excel version so it might be that ";" must be ",")
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
I have been working on this 2 weeks and have finally come to the conclusion. I am trying to use index/match to find an article number in any 1 of 3 attribute files workbooks. I have been am using Vlookup, but the Master attribute file workbooks DO NOT list the article number in column A (but list them in F) and therefore I have been creating an altered copy every month to place the article numbers in column A so VLOOKUP would work. Index/Match would be a more efficient look up formula as I could link directly to the Master Attribute files without altering the workbooks.
Below is the formula I have been using that looks in 2 attribute files workbooks
=IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)),
IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE)),"",
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE))),
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)))
Below are the three (the new formula would incorporate a 3rd attributes workbook "Other" to the search criteria) Index/Match formulas I would like to "Tie" together to find the article number in any of the 3 attribute files workbooks and return column A if the article number is present or nothing if the article number is not present in any of the 3.
=INDEX('C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!A:A,MATCH(A8,
'C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!F:F,0))
=INDEX('C:JDAAttributeFiles[PartAttributes.xls]PartAttributes
[Code] .....
I'm trying to automate a search and match function between two separate workbooks using VBA and am having some problems. I'm using the following line:
search_results = Application.Match(temp, Range("E1:E900"), 0)
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
I am trying to get the lookup function to return the corresponding value in a separate worksheet where it occurs more than once in the lookup range.
At the moment it is only finding the first match. i.e. in
=VLOOKUP(A2,'Appointment Tracker'!A2:B9999,2,0)
Sheet2:
col A = contains the style#
col B = contains the color of the style
col C = contains the size of the style
col D = contains the qty of the style,color, size
Sheet1:
I would like to do the following:
A1 = input the style #
B1 = input the color of that style
C1 = input the size of that style
then D1 should automatically contain the qty of the mentioned style, color, and size.
I'm using a formula to lookup names within text and return that name to a separate column if it's found.
The formula is =INDEX($E$1024:$E$1026,MATCH(FALSE,ISERROR(FIND($E$1024:$E$1026,E1010)),0))
I understand index and match functions, but I'm confused regarding the use of FALSE as the lookup value and the iserror(find( usage.
I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm
In the attached file, I am trying to lookup what vendor is assigned to a part, and enter the vendor number in column J, K or L, depending on the number that is assigned.
For example, the top part number, RAD001, has a 2 in column N, indicating vendor # 015354 is the Alternate vendor # 1. It has a 1 in column V, indicating 034180 is the Primary Vendor, and it has a 3 in column Z, to indicate that 015229 is the Alternate Vendor # 2.
What formula would I need to put in cell J2 so that if a 1 is found in row 2 it will return the value 1 position left of where the 1 is found? I will then put a similar formula in columns K and L to return the vendor number if a 2 or a 3 is found.
The end result will be that for each part number you will be able to see what vendor is primary, alternat 1 and alternate 2. I want to make this a formula because the actual sheet will be thousands of part numbers long, and I will need it to update the vendor information if the primary vendor is changed.
I am trying to search a sheet for a given name and return the total point for that marking period. The main problem i am having is that the names aren't in the same cell on each sheet. It is a list of students and each sheet represents a marking period.
I have attached the file
I'm attaching a spreadsheet in order for you to understand my question, and I will explain it based on that, ok? I apologize in advance for english mistakes, since it's not my 1st language. I want to search the salary value in column B and, in Column C, I need the job title to be posted based on what is written in Column J.
The table h2:i8 contains the maximum salary a person on that position can earn. So when you look the salary on column B, it should seach in column H and compare to the maximum value, and return the description on Column I that corresponds to that salary range. So if somebody earns 6500, it should be qualified as a supervisor, because its salary maximum is 7100. I have searched the forum here and found similar problems, with suggestions to use vlooup and Index. But I just can not figure it out.
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
Here is an example of my spreadsheet: Excel example.xlsx
I would like to get all the bid/ask quotes for the different currency pairs in sheet 2 into sheet 1 sorted by the right date and time.
I need a formula which recognize the time + the currency from sheet 1 and search for it in sheet 2 then brings the right bid/ask quote back into sheet 1.
i have a workbook with two sheets. lets just call them sheet 1 and sheet 2. on sheet 1 i have data for employees and their current wages and other info. on sheet 2 the data is for compensation scale on three separate columns.......
in order for me to automatically get the data from (sheet 2 B3) the formula for sheet 1 E1 would be: ='Sheet 1'!B3. how do i formulate the equation so that i can do ='Sheet 2'!(C1)(D1)?. in other words i want to specify the column and row from the values declared in sheet 1 column c and column d respectively.
I have a formula which I took from another post to return a particular value in a specified cell as follows;
=INDEX(A1:E9,M3+MIN(IF(A1:E9=K3,ROW(A1:E9)-3)),N3+MIN(IF(A1:E9=K3,COLUMN(A1:E9)-1)))
However I don't understand what the -3 and -1 does and I believe it is these entries that are causing the error.
See attached file : TEST.xlsx
I would like to summarize all "yes" respose contained in 15 tabs. See the attached.
I would like results to be returned to the "summary tab" when user answer "yes" in the signficant column in the "process activity 1 through 15" tabs. If the answer is yes, I would like to pull the process name, aspect and impact detail.
I'm looking for a Formula in order to retrieve all addresses of all matches equal to the search criteria located in cell: E2
The results are hand-typed in col. G
This is a case of a TWO-DIMENSIONAL "Arbitrary Lookup" Arbitrary.
The range A1:C10 was named: TBL and the formula should refer to TBL as it can be dynamic in size.
PS: can anybody tell me why I don't get any E-Mails when an answer is posted?
If I have a 'key' value in a cell in one sheet, i want to use that value to find the cell in another sheet containing the 'key' and return the row number of the cell, if more than one value then I would like to be able to loop through all the rows containing that 'key' value returning the row number of each hit, kind of a programmatic version of vlookup?
I have a list of product numbers in col. A. In col. O I have a list of file
names that contain the product numbers as well as additional characters. I
need a formula that will search col O for the first instance of the text in
cell A2 and return that value.
The next formula will return all instances that contain the text found in A2.
ok I have multiple columns where Col-A can have any number between 1 and 5. Col-B has a 3 digit number in it. i want to search all of column A and determine if there is a 1 in it, if so i want it to print the value of col b into a specified area.
here is an example of my form.
COLA | COLB |
--------------
1 | 324 |
--------------
2 | 325 |
--------------
1 | 327 |
---------------
this is basics, i will be using this to search col-a, determine what number is in the column, then print the number found in col b, on another page in a specific place, on the other page i have squares labeled 1-50. in a grid pattern, 10 squares per row. im trying to get all the entries in col-a, that are a 1, to put whatever value is in col-b in the first box of the grid, whatever is found in col-a with a 2, the value found n col-b of that row, into the grid box labeled 2 etc......
I need a formula that will search for the value of C1, Sheet1 in Sheet2 then if found, return a value from that row in column D? If not found then return a message "search emails".
I can upload a dummy if that's possible?