I have been working on a Software Audit list that has been created by someone else. He has created an Application Colum and under that is a drop down box. I want to be able to search by typing in the first letter, i.e. 'S' but currently I just have to scroll down.
Do I need to create and Active X Combo Box to do this or is there another way? Also, is it possible to search on the first two letters, i.e. 'se'?
Is it possible to search my Worksheets("Register").Shapes("Drop Down 1") by selecting it and type in a letter? Similar to a combobox "0 - fmMatchEntryFistLetter"
View 2 Replies View RelatedWell following on from my question earlier, I am still playing with my timesheet/rota I'm developing.
I have a start time and an end time, which is formatted as hh:mm then an hours cell which adds them up for you.
BUT if someone is on a rest day or a holiday day or a sick day etc, I would like them to be able to type that in without the cell that adds the hours up going doo laly!!!!! (######)
So, is there anyway they can type say 'R' and then getting the hours total cell to ignore it because it isn't a time?
I have written code in which cell color changes according to cell value. To change cell value I have used drop down list (Data/Validation/List). Main question/problem is code works well when cell value is changed by typing from keyboard only.
Code doesn't work when cell value is changed using drop down list.
Attached is the test file : Test_26082013.xls
Also refer link [URL] .....
I am not sure the correct term for this but the autofill drop-down menu that pops up when typing code does not come up for me.
Example:
Sheets("Form").combobox1.
I usually get a drop-down menu with a list of members of the "ComboBox" class.
Is there a setting for that enables/disables this?
I have a drop down menu using data validation and the values are B,C,D
I want to keep the letter in a cell, but make each one become number, so B=5, C=10, D=20
I have another dropo down menu that contains 6,10,16
What I require is that once the 2 drop down menus have 'values selected' I need to multiply the 2 cells together
so for example
If B and 6 was selected, I require the 3rd cell to be 5*6 so what is the formula?
I'd basically like a formula that finds a number (eg 220) within either the first 10 rows (or with row 5 if this isn't possible) and returns the column Letter as the result. The number will only appear once and only in one column. If it matters the columns go all the way to EC.
I have this piece of code
Sub do()
Dim i As Integer
Dim x As integer
x = 5000
i = 1
Do Until i = x
If Cells(1, i).Value = "C" Then
ActiveCell.Select
Selection.Insert Shift:=xlToRight
Selection.Insert Shift:=xlToRigh
i = i + 1
End If
Loop
End Sub
I want it to search down the first column and find any instance of the letter C and shift it (along with the entire row) over two clumns to the right.
Is there a way to have a formula search an entire row containing certian text, for example "x" and have the formula return the letter of the first column that text is found?
View 8 Replies View RelatedI am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedI have a workbook with several sheets of data - it's basically names with a series of assessment data. Each name and selection of data is in its own row.
I want to build an additional sheet with a search function/drop down box that wil allow any name to be searched for/selected and return that specific name/all/specific cells in that row. I believe this could be done either using VLOOKUP or a Macro but I am only a beginner with either of these things.
I really like the slicers in Excel when working with data scenarios, but I don't like having to scroll up and down through the list of options.
Is there a way to add a "Search" box at the top like the traditional drop-down auto-filter? Or, does any loophole to making one?
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
I want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
When I'm doing cells in a column, there are times where I start a word and it tries to complete the word based on what I wrote before. For example, I'll put Base I, Base II, Base III... etc.
How do I get it to add the word base, but then I can continue typing the numeral after it? I do not want to create another column after with the numeral. So as I type B, A, [click certain button and continue typing] II
On a sheet of my workbook, I need to allow typing but not pasting. I'm using Workbook, because I'd just as soon not allow pasting anywhere.
If the data is copied from within Excel, this seems to work:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Application.CutCopyMode = False
End Sub
but if the data is copied from somewhere outside of Excel, it pastes it anyway.
I'm in need of a macro that takes data from cells in column A and moves them into different cells. Each block of data includes a company name, contact name, address and usually (but not always) phone, fax, email, website, etc. I want to move each set of contact info into a set of cells that begin in column A, starting with company name. refer to the attached spreadsheet
View 5 Replies View RelatedIs there anyway to type accents in Excel the same way you can do in Word,
for exemple ctrl+' before e gives é
I am using the Language setting "US and Western Europe" for Office Language settings.
How do I keep users from writing data into ComboBoxes on a UserForm?
View 4 Replies View RelatedI'm working on an Excel spreadsheet and basicly i'm inserting manually data from a lot of paper forms.
It isn't a dificult thing, but is boring, because I have to do more than 2000 forms per week!
I want to accelerate, and how to do that
Problem: "Address"! The Excel page that i'm working has a column to feel with Addresses manually, but I have a table with all correct Address names from the city that I'm working about in other page.
What I would like is when start typing some keyword from the Address cell, it could show me all the choises of input (based on the correct Address Table)
Excel, by default, show, by exact order, all the choises, already typed on the same collumn.
I don't want that.
- imagine I have the Table 1 (representing the table with all city adresses) with a collumn called 'Address' with:
A1 - Street ZXY
A2 - Avenue QWE
A3 - Street QWE
A4 - Avenue ZXY
when typing on another Table, if I write something like “QWE” show me the A2 and A3 to choose wich I'm going to feel, and the same to “ZXY”, showing the A1 and A4. Other thing, if I write “QWE street” may show A3 also. Keyword is what i'm talking about
Is there a way I can set up the worksheet so that in one cell I can type out for example product codes/numbers and by doing the description for the product will come up in another cell. Rather then copy and pasting very the many different product descriptions?
View 2 Replies View RelatedI want to type "121505" in a cell and it display 12-15-05. What formatting do I use?
View 4 Replies View RelatedWhen I type a eMail address, such as: " myemail@hotmail.com " into any cell and then touch enter, it automatically becomes a hyperlink coloring it blue and underscored. I do not want it to be a hyperlink, for when it is a hyperlink, I have to click on remove hyperlink.
View 2 Replies View RelatedI want to learn how i can able to do a function or ... to LOCK a Cell automatically after editing or typing and no one able to edit it again without entering Password.
View 14 Replies View RelatedIs there a way to turn off those annoying error message boxes that pop-up when a line of code is incorrect? I pretty frequently go to another area of code to grab some previous code to copy and paste, and the error message box pops-up, so I have to hit OK to close it. It would be nice if it still highlighted the problem red, but I'd even give that up for those boxes to go away.
View 5 Replies View RelatedI have tables on a spreadsheet and userforms created. Is there anyway to prevent users from just typing on the worksheet so they will have to use the userform?
View 4 Replies View RelatedI have a textbox in a user form that I'm using as a way for someone to view what I've written but not for them to write in. Is there a way to easily disable them from writing in the text box?
View 2 Replies View Related
