UserForm Combobox Wild Search Filter Based On First Letter Entry
Jun 18, 2014
I am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
I am trying to find out whether you can restrict the rest of the userform from being available, unless a certain field is entered.
I have a tax invoice userform, I want to restrict the user from entering any other data unless they have selected a customer.
There are other fields such as Customer Address, Customer Number, Disc% and Terms that populate through vlookup code once the customer is selected, so still need that to work once the customer is selected. I just don't want them to be able to enter any other data on the userform without the customer being selected.
I wasn't sure whether I needed to enter code into every other textbox or combo box that if cboCustomer = "" then pop up an error message, but that would require a lot of code to be entered. I have 30 comboboxes and 53 Textboxes that I want to restrict to not being available unless a customer is selected from combobox.
Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have 4 columns, If column B (Ref No) is filled in, the adjacent columns, C,D and E become mandatory and an input box pops up on screen one after the other for entry into each column.
My problem is that I require a drop down list and not a input box for the final column (status). So i have created a userform with a combobox dropdown. I am having problems connecting the combobox selection to the final column, and for the selected combobox item to go into the right cell like the input box entry currently does.
Attachment 53209test743.xls
I have attached a sheet and also you can see the code below.
Code in Sheet
VB: Public SaveVal1 Public SaveVal2 Public SaveVal3
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
I have a Userform where I use a ComboBox to populate raw A from a worksheet.
I use this form to update new data that relates to the selected item in the ComboBox.
In that user form, when I select an item from the ComboBox, I idetifay it's raw and display the data from columns B,C...to I in text boxes on the Userform.
I then set the "Enable" property of the text boxes that has data to "False" so that field cannot be updated again.
What I do today is if all the fields where updated, a message box will say "All fields are full" and I clear the form.
Now I want to improve my selection by removing items from the ComboBox if all the "needing update" columns are field.
By this I want to filter out the items that where already updated before and only show the ones needing update.
Here is what I have, I need to change the UserForm_Initialize section so it will only show the rows needing update.
Code:
Private Sub UserForm_Initialize() 'Populate "Cards" Combobox. Dim rngCards As Range Dim ws As Worksheet Set ws = Worksheets("Rejects")
I am trying to create a combobox to filter a set of data by the month that is entered.
The below code worked fine when there was just the month entered, but now all the entries in the sheet are in the format 01 January 2009. So I need a section of code which will search for the combobox value as part of a string in my range.
I'd basically like a formula that finds a number (eg 220) within either the first 10 rows (or with row 5 if this isn't possible) and returns the column Letter as the result. The number will only appear once and only in one column. If it matters the columns go all the way to EC.
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
Currently I am working on a data entry form for CRM database using Excel. Now i am stuck at filtering and displaying the data from the spread sheet to the user form.
There are three text boxes to key in the filter criteria and a button which will filter the data from the spreadsheet based on the criteria in the three text boxes. Then the whole row where the filtered data resides will be displayed on text boxes on the user form.
Below is my current code. The strFind1 searches for a name within the database and then I need strFind2 to do a exact for a Subproject search and a partial search for everything containing the Subproject selected and other Subprojects. Currently, when the database entry in the worksheet includes Subproject 1 the search function works but when I have an entry that contains Subproject 1/Subproject 4 it does not find the entry. How can I expand the strFind2 to equal what is selected in the Combobox2 and find entries that have what is selected plus more text. I have set the line where I think everything is going wrong to a bold format.
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example John Red Julie Red Bob Blue John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code: Sub cmbLnOffNum_Change() Dim idx As Long Dim LnOffRow As Long
Testing For First Letter Of Entry. within an if statement, i'm testing for the first letter of another cell with the function: left(e273,1)= "D". this works well, but i only have a few letters to test for and i'd like to test for not "D", etc. (i.,e, what if the first letter is not D, then do...)...?
For the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
I have a userform that I use to enter fault calls and it saves in to a spreadsheet.
I want to develop the capability to be able to have a form that Will search a pre-existing call and then when it finds it to bring up the main userform and populate it with existing details so that the user can amend them if reqd and save back to the database.
So what i want.
Userform - New Call Userform - search existing call
I want to open 'search existing call' userform, be able to search based on one of the following: callrefnum, fault_type, Call_logged_by
Once the call is found - it should be displayed and then on double click it shd open up in the main userform 'New Call' with all existing details populated.
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
i have a combobox and have A, B, C, as options in the combobox
then I have a table from row 10 to row 50
if A is selected from the combobox, I want excel to show only rows 10 to 20 and hide rows 20 to 50
if b is selected from the combobox, I want excel to show only rows 20 to 30 and hide rows 10 to 20 & 30 to 40
if c is selected from the combobox, I want excel to show only rows 30 to 40 and hide rows 10 to 30 & 40 to 50
in other words, i want all rows 10 to 50 hidden at all times, until a selection A, B, C is made in which i want thoes related rows to be shows and all other rows between rows 10 to 50 hidden.
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click() unloadme End Sub Private Sub CommandButtonOK_Click() With Workbooks("RETS results version 2.xlsm")
I have been working on a Software Audit list that has been created by someone else. He has created an Application Colum and under that is a drop down box. I want to be able to search by typing in the first letter, i.e. 'S' but currently I just have to scroll down.
Do I need to create and Active X Combo Box to do this or is there another way? Also, is it possible to search on the first two letters, i.e. 'se'?
