I'm in need of a macro that takes data from cells in column A and moves them into different cells. Each block of data includes a company name, contact name, address and usually (but not always) phone, fax, email, website, etc. I want to move each set of contact info into a set of cells that begin in column A, starting with company name. refer to the attached spreadsheet
View 5 RepliesI have a userform used to insert new vehicle details onto a spreadsheet. below is the code used in two of the boxes to choose the service intervals and the engine type. There is another combobox on the form, however when I try the same type of code for more than 1 box I receive an error on the "Sub Userform_Initialize" line. I assume I need to change something on the 'Sub' line but I cannot figure out what!!
View 2 Replies View RelatedWhen I'm doing cells in a column, there are times where I start a word and it tries to complete the word based on what I wrote before. For example, I'll put Base I, Base II, Base III... etc.
How do I get it to add the word base, but then I can continue typing the numeral after it? I do not want to create another column after with the numeral. So as I type B, A, [click certain button and continue typing] II
On a sheet of my workbook, I need to allow typing but not pasting. I'm using Workbook, because I'd just as soon not allow pasting anywhere.
If the data is copied from within Excel, this seems to work:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Application.CutCopyMode = False
End Sub
but if the data is copied from somewhere outside of Excel, it pastes it anyway.
Is there anyway to type accents in Excel the same way you can do in Word,
for exemple ctrl+' before e gives é
I am using the Language setting "US and Western Europe" for Office Language settings.
How do I keep users from writing data into ComboBoxes on a UserForm?
View 4 Replies View RelatedI'm working on an Excel spreadsheet and basicly i'm inserting manually data from a lot of paper forms.
It isn't a dificult thing, but is boring, because I have to do more than 2000 forms per week!
I want to accelerate, and how to do that
Problem: "Address"! The Excel page that i'm working has a column to feel with Addresses manually, but I have a table with all correct Address names from the city that I'm working about in other page.
What I would like is when start typing some keyword from the Address cell, it could show me all the choises of input (based on the correct Address Table)
Excel, by default, show, by exact order, all the choises, already typed on the same collumn.
I don't want that.
- imagine I have the Table 1 (representing the table with all city adresses) with a collumn called 'Address' with:
A1 - Street ZXY
A2 - Avenue QWE
A3 - Street QWE
A4 - Avenue ZXY
when typing on another Table, if I write something like “QWE” show me the A2 and A3 to choose wich I'm going to feel, and the same to “ZXY”, showing the A1 and A4. Other thing, if I write “QWE street” may show A3 also. Keyword is what i'm talking about
Is there a way I can set up the worksheet so that in one cell I can type out for example product codes/numbers and by doing the description for the product will come up in another cell. Rather then copy and pasting very the many different product descriptions?
View 2 Replies View RelatedI want to type "121505" in a cell and it display 12-15-05. What formatting do I use?
View 4 Replies View RelatedWhen I type a eMail address, such as: " myemail@hotmail.com " into any cell and then touch enter, it automatically becomes a hyperlink coloring it blue and underscored. I do not want it to be a hyperlink, for when it is a hyperlink, I have to click on remove hyperlink.
View 2 Replies View RelatedI want to learn how i can able to do a function or ... to LOCK a Cell automatically after editing or typing and no one able to edit it again without entering Password.
View 14 Replies View RelatedI have been working on a Software Audit list that has been created by someone else. He has created an Application Colum and under that is a drop down box. I want to be able to search by typing in the first letter, i.e. 'S' but currently I just have to scroll down.
Do I need to create and Active X Combo Box to do this or is there another way? Also, is it possible to search on the first two letters, i.e. 'se'?
Is there a way to turn off those annoying error message boxes that pop-up when a line of code is incorrect? I pretty frequently go to another area of code to grab some previous code to copy and paste, and the error message box pops-up, so I have to hit OK to close it. It would be nice if it still highlighted the problem red, but I'd even give that up for those boxes to go away.
View 5 Replies View RelatedI have tables on a spreadsheet and userforms created. Is there anyway to prevent users from just typing on the worksheet so they will have to use the userform?
View 4 Replies View RelatedI have a textbox in a user form that I'm using as a way for someone to view what I've written but not for them to write in. Is there a way to easily disable them from writing in the text box?
View 2 Replies View RelatedI have an issue with a user form I have created. When users open the form there are certain options (ie location) which are a combo box and I only want users to be able to select one of the drop down options.
Sadly they can also type in the combo box. How do I block users from typing in a combo box in a user form so that they are forced into selecting one of the drop down options.
Is it possible to have a macro run as soon as there is text typed into cell A2? Basically, I have a form that needs to be filled out, but somehow, users forget to put their name in the box. So I don't want any information to be able to be typed in until a name is entered.
View 9 Replies View Relatedis it possible to create in Excel something similar to the text box you have when you enter the product key on the text boxes?
like for example, when you need to type 1997 as your id.
when you typed "1" in A1, cursor will automatically move to B1.
when you typed "9" in B1, cursor will automatically move to C1...
and so on..
thus, user that fill in the form does not need to press enter, or right arrow key when inputting their id.
Is there a way that Excel can automatically enter to next row once the typing has reach the end.
Example: I have 5 columns (A to E) and I am typing at column A. While typing, the text will go along to cell B, C, D and E. The problem is, if I don't manually go to next row and continue typing, the text will go to column F, G and so on. Is there a way where excel can automatically jump to next row if the text has reach column E?
Another problem is, say I have 3 rows full of text (column A to E). If I edit one of the row to exter some new texts, the whole sentence will go along to column F, G and so on. What I can do now is, re-edit all the rows to adjust them back.
how to write VBA to stop user typing in a combobox but only choose from the dropdown list?
SO that to avoice any device I/O error.
Is there a macro or code snippet that can change the color of the font while i am typing in the cell. Means that if the font color int he cell is originally RED, i can type and change it to another color using VB code.
View 2 Replies View RelatedInstead of typing out my code hundreds of times, I would like to replace it with an abbreviation or variable(?). Here is my example. If I have this in the wrong place please let me know. I want to replace Activecell.Interior.Colorindex with ACIC. I tried to Dim ACIC as range, variant, string...to no avail. In combination I Set ACIC = Activecell.Interior.Colorindex and that didn't work. I have been toiling with VBA for a year and I am still trying to learn the terminology and understand it so please forgive me if I seem really NOOBIE. :-)
View 9 Replies View RelatedI'm typing the formula straight into the cell and funny thing happens: the cell displays the formula, but not the result...
SO now I can see =A2+B2 and no values.
I used to type a date into excel as "apr 17" and it displayed the date as 17-Apr-14, which is exactly how I wanted it to.
Now, with my new computer, I type "apr 17" and get the date 01-Apr-17.
I have changed the format of the cell to date, with the type set to 14-Mar-01. I have even tried changing the format to date, custom dd-mmm-yy and still get the same issue.
I want excel to recognize I am only entering the month and day and to automatically input the current year. I do not want to type the year every time I make a data entry.
I am creating a form using Excel 2007/XP, and am trying to make it easy to use for both people who want to click and people who want to type. I have a series of list boxes in the form that make it easy for the clickers, but I want the typers to be able to tab into the box and make a selection. For example, if the choices are Apples, Pears, and Grapes, I would like a user to be able to tab into the box, hit P and tab to the next box and have Pear be selected.
View 2 Replies View RelatedI am trying to have a form that people can fill in and I know it would be far better to use Word for this purpose but it looks so much better in Excel format. The problem is I have merged about 10 cells in a row and copied this format down a few rows.
Now although I have set the 'Text Wrap' option the rows will not auto expand unti to accodate all the text unless I do a ALT-ENTER combo. The problem is anyone using this spreadsheet to complete the form may not know how to use this feature.
Is there anyway Excel can expand automatically or do I need some sort of Macro based in the Worksheet that will automatically adjust the row if the text is too long to fit?
when I type a 6 digit date into Excel cells formatted to dd/mm/yyyy very strange dates are being displayed. Tried opening a new book - just the same result. All is ok typing with the / in between but I don't usually have to do that. Regional settings have been checked and formatting etc.
View 3 Replies View RelatedI have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
Is it possible to click on a cell and use the cell info as the input data for a search instead of typing data into a cell for a vlookup?
For example, I have a spreadsheet with numbers corresponding to stock codes. Would it be posible to just click on the stock number to return the information on the stock (levels, sizes etc...) instead of typing the stock code in for a vlookup calculation.
I would like to create a textbox that displays the typed numbers as currency format (similar to selecting currency format for a cell)
so that as the user types in 9999 they will see the textbox populate with
$99.99 instead of just $9.09 which is what happens when I try the following code