Search Column E For Value - Copy Value In Corresponding Column A Cell To Another Cell
Aug 30, 2013
search column "E" for a specific text value (let's say "it"). When found, copy the value in column "A" for the corresponding row where "it" was found to another cell "F2". When copying to cell "F2", if a value already exists in cell "F2", then no nothing else copy the value. If no "it" was found in the column, do nothing. I will continue to search, but since I am new to VBA it takes me a bit to find what I specifically need.
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab 001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
What I have: (Table1) A table with multiple columns. One column consists of cells that can contain different types of information in a non-consistent way. One thing is for sure: if a cell contains data, it will always contain a name of a person. E.g. a cell in that column could contain the following: "838374987343 based on 98989 John 990999", or "000000000john", or "William 39843984 more text and even more text"
(Table2) A separate table that contains the names of people in a column, e.g. "John", "William"
What I want:A formula that searches for the names (mentioned in Table2) in Table1 and copies this name in a new column.
Result:A new column with the copied names as content.
I have a file which has in excess of 12,000 rows of data in 5 columns (sample file attached with fake data). The five rows are:
"First Name" "Last Name" "Name" (uses CONCATENATE to combine column A & B) "Email" "Date Attended"
There will be duplications in the list as people will have attended more than once over the years. What I want to do is search through the email addresses (Column D with D1 being the header) and where there is a duplicate email address copy the cell to the right of the duplicate (F#) into the next available cell to the right of the first occurance and then delete the row with the duplicated email address.
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
I'm trying to get a formula to give a response if a given cell matches any of the values in a row. This formula does not work: B2=IF(A2=D2:D6;D1;IF(A2=E2:E6;E1;0))
Spreadsheet: see attachment. I know one solution to the problem but it cannot be the right one. B2=IF(OR(A2=D2;A2=D3;A2=D4;A2=D5;A2=D6);D1;. I'm using Excel 2007, and it must be a way to easily check one cell up against a row or column. The solution with "OR" statement will be extremely long for a long list, and many columns.
I'm using the following code to open a target document and find a cell in this document in column A which has the same value as an another cell in the target document:
Can any one tell me why the result of this search ends up with cell A2 which is empty, although the CZ2 cell has an another value, which can be found in column A.
I have say Cell B3 this is always a date on a sheet named Party Times on another sheet I have a column of dates with entries, say it is column D this sheet is named Party Schedule.
I need to check Cell B3 (4/30/2014) with all of the Column D on sheet Party Schedule to be sure I do not schedule another party on the same date...
Also doing this it needs to be somewhate of a do --- while if there ARE NOT any dates overlapping then go ahead and copy and paste the macro to the sheet if there are msgbox "PARTY ALREADY SCHEDULED PLEASE RESCHEDULE).
Want to look in one column and find the first non-blank numerical value, then have it return a value from another column.
Used to nest multiple IF functions together from different cells, but it seems overly complicated and time consuming. Sometimes I have over 30 cells to check.
For example, if Column A contains weekly sales data by week, entered weekly, and Column E has corresponding comparison data from the previous year. I want to enter a formula to check the first row that has sales data entered and have it match up the comparison value in the other column.
I tried to search the forum first and but i cant find ways to combine everything i wanted to achieve. That's why i'm posting this to consolidate all those...Sample files are attached for better understanding. I have an excel file (sample.xls) which has cell values in column A. These values will then be used to find a match in each of the text files (in this example, sample 1.txt & sample 2.txt) present in the same folder with my excel workbook. I need a macro to perform the scenarios below.
1. Say, the excel file contains a list of cell values in column A. 2. Temporarily open the first text file (sample 1.txt) as an excel workbook. 3. Search each cell value in column A for a match in the first text file. a. If that certain cell finds a match, no matter how many it may find, that cell will be formatted with "BOLD" format. b. If not, that cell will be formatted with GRAY text color. 4. After all the cells have been used, the first text file will be closed and the next text file (sample 2.txt) will be opened temporarily. 5. Repeat steps 3 & 4, except that, when the cell value has "BOLD" format already, it will be skipped and proceed to the next cell. That is, the grayed ones can be turned back to black color and will be formatted to "BOLD" format if a match has been found in the 2nd text file. 6. If there are other text files present within the folder, do steps 2 to 5, until all the text files are searched.
I am really desperate about this. I have a column of which I only want every 9th cell value listed seperately one below the other in a seperate column.
I tried defining the first two cells of the new column (e.g. first cell input is =B1 and second one is =B10, third one would be =B19 and so on...) and using the usual pull down.
In short: I want to copy values from A1,A10,A19,A28...(always +9) into B1 (from A1), B2 (from
PS: I have access to the 2008 Mac OSX version as well as to the 2007 Windows version!!!
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
I am building a Workbook which takes data from SheetA and inserts it into SheetB. Part of the data is only entered when a positive value exists.
I then do an export from SheetB.
The problem is that I need to get the column number and pass it to the cell reference based on the field name in row 1.
Dim sFindstring As String Dim rFindcell As range Dim iR As Integer Dim iC As Integer
sFindString = " Find this string in the cell" 'Using cells find the findstring Set rFindCell = Cells.Find(What:=sFindString, After:=[A1], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
'OK so look here iR = 3 'I am trying to pick up the column number iC = rFindCell.Column
rFindCell throws an object or with block variable not set error. Is there some property that I need to set.
I’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook? I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
I need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
I need to copy Invoice id from Column B to Column A, firstly it would be to the cell one down and one across, ie data from B3 is copied to A4. I then need to continue to copy this data down in column A but only while there is a date in column B.
I have a workbook that I have set up some VBA code so that when it opens I have a box ask, "View Data" or "Start New Audit." When the user clicks "Start New Audit" Excel creates a new sheet, names it based on the current date (in yyyymmdd format), and copies a range from a sheet called "Master Sheet" to this new sheet. These new sheets are for users to input data on a daily basis. As that data is typed in, there are four different columns that have an average function at the bottom. I need the result of that average function to be sent to another pre-existing sheet on the next empty row so that I can create a chart out of it.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D. e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a dataset that is large. I want to write a macro program that checks the number in cell A1, copies the number and then the rows contents to another worksheet/spreadsheet. Then jumps to cell A2 and if the number is different to that of A1 copy the data of that entire row over from that row to the next worksheet/spreadsheet. If the number is the same as A1 then jump over to A3
Then continue this process but rather than comparing it to A1, compare it to the new number that has been found in coloumn A.
For example
7 A 7 A 6 AB 7 A
So starting at the first line then jumping the next one then to 6 and finally 7.
Looking to find a way to take the value of one cell and copy it to a column starting from IK5 to the end of column the amount of row will always be different. So if I type "need to call" in cell F1 and I would like to have a macro button to copy this to column IK cell 5 and on to the end of the data. Here is what I have so far.
Suppose I am receiving date in cell A1 form external source on each time I refresh, each time the data that comes in Cell A1 is different based on the source sending this data to me. I want to register whatever come in cell A1 in b1, b2, b3 so on.
