I have a column with rows from 41:254, the first cell contains a word, and the next is blank, and this repeats the whole way down.
a previous macro i run changes one of the cells in the range (one of the ones containing a word) to a number value, i want to write a further macro to select this cell that has now changed. when it changes it will be the only cell in the range with a number in.
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedSample data (all in column a):
Heading 1
123
12345
1234
345
Heading 2
987
9876
Heading 3
785
Heading 1
2356
8525
Heading 2.........
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I'm trying to build a function, but I haven't been able to successfully navigate some of the eccentricities of Excel formula-building.
Right now I am working on counting all of the cells that contain numbers (so likely just a =COUNT function), but will be eventually getting other descriptive stats as well. My problem is that I would like to create a formula that will perform the counting/mean calculation, etc., but only on a specific column that has the header cell that contains several specific words. Rather than having to type in the target words for each column, I would like to have the target words in the function be imported from multiple designated cells.
For example,
I want to find how many numbered cells are found in column E headed as "dog brown," but I also have columns headed as "cat brown" "dog black" etc. (which I will be using the formula on later) to paint a small picture, in my descriptive table, "dog" is in B31 and "brown" is in C30, then "cat" in B32 and "black" in D30.
I’d like to copy a range of cells: (A1 – A4) and paste them into Cell A5, but here’s the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies View RelatedI've been using conventional method to do this and it's time consuming. I would like to total up 2 column. A multiply B to be exact. Below are some examples:
Table 1 - Before totaling up:
Quantity
Product
5
2 x Button A White
3
4 x Button B Pink
4
5 x Ribbon A Black
2
3 x Thread A White
6
2 x Cloth A Blue
Table 2 - After totaling up:
Quantity
Product
10
Button A White
12
Button B Pink
20
Ribbon A Black
6
Thread A White
12
Cloth A Blue
I need to have the sum of the "Quantity" multiply "Product". Or in short A x B.
And the end result need to have the number and "x" sign removed while keeping on the the products names. (2 x ) Take note it's "number" space "symbol" space.
trying to open a txt so I can copy the numbers or words into a cell.
there are 5 numbers in each txt, that need to go into 5 cells.
I have the application.getopenfile and when I click on the test file, it gives me an error. that its can't open or do that operation.
I have a set of data in once cell and its strung out. I'm trying to pull the numbers that follow certain words from that data. That's easy enough with the find and mid function for the first one. But after that I have a repeating word (see below) and different numbers that follow it. So I want to pull the second number string after that word, the third and so on.
I've attached an excel file that explains this better.
How to copy an entire column having numbers and words on every single cell into another column but only copying numbers, not words.
View 9 Replies View RelatedI'm looking for a macro to remove all words (in a single word per cell format) in a range (approx 100 columns & 7000 rows), except for a list of 100 words.
I'd prefer to email the file if that's okay.
I have tried Sumproduct and Countif and can not get a proper count of rows that contain specific words in multiple columns. I have attached an example spreadsheet where I am looking for a result of 7 rows that contain 1 to 4 specific words within phrases. The example looks for the words: "virus", "spyware", "malware" & "adaware", and ignores any other words like "aware" or "ware".
View 7 Replies View RelatedI am trying to count words in seperate rows,columns in a spreadsheet. I have tried to use the formula that was suggested in one of the formula pages but I did not get the correct answer. I tried to do just like the information said with a1:a5. I did get 5 as an answer but when I deleted one of the words it still said there were 5 words.
View 4 Replies View RelatedI want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedAll words are in Cell A, separated by the ";" symbol. I want separate into different Cells. Example... Lead_ID in Cell A1, Application Data in A2, Date Purchased in Cell A3 and so on.
lead_id;application_date;date_purchased;first_name;last_name;email;day_phone;work_phone;
best_time;city;state;zip;addr;cred_rating;cred_score;yearly_income;prop_state;prop_type;purpose;
loan_amount;prop_value;ltv;mtg_bal1;mtg_bal2;services;credit_repair;foreclosure;debt_management;comments
I have database of customers and one collum is labeled "Name and Family name". I want excel to split this records in two collums, ergo one labeled Name, the other one Family name.
Note: there are also some names like Furio Alipo Novanta, so in that case I want excel to keep Furio in first cell, and move other stuff next to it.
I have some data that is imported, it's about 25,000-30,000 characters and 2,300- 3,500 words, it all comes in as one cell, A1, if I do a text to column on it I will loose everything past column IV. Is there anyway a macro can take the data and put each word in a cell by its self starting in A2? The words a have a space between them.
REPLACE ENGINE OIL & FILTER, VEHICLE INSPECTION, FILL FLUIDS
RESET THE OIL REPLACEMENT REMINDER LIGHT.
(blank row )
(blank row )
E
I have an excel file with many columns containing information at the end of each column like this.
It lists car verbage, then 2 blank cells are required , followed by an E.
I was wondering if a macro could be used to where it looks at a column, finds where the verbage ends, and automatically inserts 2 blank cells below it followed by an E. In other words it needs to make sure only 2 blank cells are after the verbage and an e should follow in the cell below. If the column has 3 blank cells below the verbage it should fix it and add the E at the appropriate space.
I seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
Why the following code gives me an error. I have so much trouble with ranges, I use the syntax as it is prescribed. Here is the code. I will include some code lines underneath since I imagine they wont work either.
[Code] .....
I eventually will be turning the range statements into copy and paste instead of select. At the moment I am using select to make sure the proper cells are being selected.
I am also attaching my complete workbook as well.
Attached File : Therapy Tracker - Tester V2.3 -deleted logo.xlsm‎
How can I select a range of cells dynamically, not know how many cells down for two columns that I will need to select, there will be a blank cell at the end of the needed range.
View 9 Replies View RelatedI have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of
a new cell:
F|45|A|30|F|15|F|10
Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.
SUMIF(A1:G1,"F",B1:H1)
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
I'm looking for a macro that only selects the unprotected cells in a range. So that I can copy a formula in these cells.
I found the below macro on the web but it will select all the unprotected cells in the worksheet. I guess this one can easily be adjusted to only select the cells in a range, but I do not know how to do this.
Code:
Sub SelectUnlockedCells()
Dim WorkRange As Range
Dim FoundCells As Range
Dim Cell As Range
Set WorkRange = ActiveSheet.UsedRange
For Each Cell In WorkRange
If Cell.Locked = False Then
[Code]...
I have come up with this bit of code by joining in two separate sets of code that I used earlier. What I want to do is this, for a given range I need to find each cell that has a comma and once that cell is found a formula has to be applied in a cell few columns to the left.. Here is the code that I am using..
Code:
Sub Macro8()
Dim i As Long
For i = 1 To 1000
[Code]...
The sheet can be downloaded from here, I want column H to be (Col B / Col C) whenever Col A has a cell with comma in it. For this sheet col H needs to be populated 3 in places. The code above does it only for first instance.
I am looking for a macro that will allow me to select the range of A5 to the last column with data in row 5
View 9 Replies View RelatedI need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected
View 3 Replies View RelatedI have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
I'm trying to create a macro for another user that she will use repeatedly for many different spreadsheets. Each spreadsheet will have a varying amount of rows that will need to be exported to a different file. She will highlight the cells she wants exported and then hit a button to do so. My problem is this: how do I code a macro so that it will know which cell is the beginning of her selection and which is the end?
View 2 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED