I need to start at cell "T150" and go down column "T" until the first blank cell and select the text and have a pop up message come up with those results. The first blank cell has a formula in it. I dont want that included. Cell T150 has the value Status in it. Here is what I have but is pulling back all the cells with formulas in it.
HTML Code:Â
Sub aaaa()
Dim lRow As Long, c As Range
lRow = Cells(Rows.Count, "T").End(xlUp).Row
For Each c In Range("T1:T" & lRow)
If c.Value = "Status" Or c.Value = "Status" Then
Range(c, c.End(xlDown)).Select
Private Sub CommandButton1_Click() Worksheets("Sheet1").Activate Range("A1").Select Selection.End(xlDown).Select ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate ActiveCell.PasteSpecial End Sub it errors to: SELECT METHOD OR RANGE CLASS FAILED
Is there a way to have a select function where user select a file but the file is not open. I just want to get the directory of the selected filename without opening the filename? is that possible?
The macro below will randomly pick a cell (with names)and fill with color. What I want to add is after it pick a cell a msgbox with a name of that person with YES/NO, if YES fill color. I need it not duplicate once it has already selected that cell(person).
Code: Function RandCell(Rg As Range) As Range Set RandCell = Rg.Cells(Int(Rnd * Rg.Cells.Count) + 1) End Function
I am trying to achieve the below objective but getting error message
Objective: select last non blank row and offset to next cell type a message in it error message: Runtime error 1004 : method 'Range' of Object '_Global' Failed
CODE:
Sub lastRowAll() myvar = ActiveSheet.UsedRange.SpecialCells(11).Column myrow = ActiveSheet.UsedRange.SpecialCells(11).Row Range(myvar, myrow).Offset(0, 1).Value = "Experiments with VBA" Range(myvar, myrow).Offset(0, 1).Activate End Sub
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate() If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then Me.ClearPrevious.Visible = True Else Me.ClearPrevious.Visible = False End If Sheets("MASTER").Select End Sub
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
In cell E12, I have a drop down list of choices. I am using a code that will display a message box whenever a particular choice is picked from that list.
See if you can see what is wrong with this code - I have no idea. All the spreadsheet names are correct and I have used this syntax before, I don't know what I am doing wrong. The macro has a problem with the 3rd line
I've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
I am wondering if it is at all possible (and if so, how) to CREATE your own error message (sorry about spelling mistake in heading =P) in Microsoft Excel.
I currently have the code below, and it checks if there are duplicates of the entered value on all sheets. I would also like to prevent users from entering a value that is not within a certain range. How to add this to my code? I've tried to add another If, but it just ended up looping.
Maybe it would be good to make something like: 1. first check if value is within range (between 1000000 and 3999999). if not within range: msgbox and delete entry. 2. then check for duplicates
How to send a range of cells in a sms text message by using Visual Basic for Applications in Excel?
BTW: I really need this to work for my job! So any feedback would be greatly welcomed. Please read below to understand what I'm trying to do. I need to be able to send my guys their daily goals via sms text message:
The following works great for sending a range of cells in a email message: ....
VBA code. I think I need a worsksheet change event. Here is what I'm looking for:
If cell K1 = 3 and if the value of any cell in column A is < 80000 or is > 86666, or if the five digit number begins with an alpha, then a msg box will pop up stating "Invalid range".
More background: The user will be manually inputting 5 digit numbers into column A, but if they've selected cell K1 to equal 3 from a dropdown menu (which the user also does), then values entered that are less than 80000 or greater than 86666 are 'out of range', and the user should be alerted and if possible the number they entered gets cleared.
Additionally, some of the numbers the user could type in might begin with an alpha prefix, such as "G1234" - these would also be considered out of range when K1=3, so if the conditional statement could also recognize this it would be useful.
Column A will be blank until the user types in the 5 digit number, so the code only needs to trigger if the number typed into a cell in column A is outside of the aforementioned range.
So to sum it up once again, I'm looking for a msgbox (and clear cell) if the following criteria is simultaneously met- *If K1 = 3 (meaning that K1 equaling anything other than 3 wouldn't cause the msgbox) *And values typed in column A are less than 80000 or are greater than 86666, or begin with an alpha (meaning that values typed in between 80000 - 86666 wouldn't cause the msg box.)
i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
Why am I getting method range of object global failed error message? The error seems to lie in the line highlighted in red.
VB: [CODE]Private Sub btnEditDelete_Click() Dim customerID As String Dim rowID As Integer Dim foundFlag As Integer Dim lastrecFlag As Integer Application.ScreenUpdating = False
I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
I am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code: Sub mailer() ' ' ' Dim Ash As Worksheet Dim brng As Range Dim OutApp As Object Dim OutMail As Object 'Windows("Copy of FF RPL REPORT_JULY").Activate
I use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
I have 10 workbooks which have various calculations and have several links to each other. We use Excel 2003.
For each of these files, I have the following code in the Auto_Open module Range Range(“TodayComp”) is a date taken form a link in another spreadsheet. It is on Column 3, but the row changes every day as more rows are inserted before it
This sub looks at Range(“TodayComp”) and checks the date on the cell directly above.
If say Range(“TodayComp”) is 6/25/2008, and the cell above is 6/22/2008, it will insert three rows right above Range(“TodayComp”). These rows need to be copied with formulas from the current row above Range(“TodayComp”)
Issue One: The following code works (it copies the rows), but it takes forever to run, as you can see in bold, I copy and paste each cell, instead of the entire row. Is there a way to copy and paste the entire row? Remember that I have only a named range to refer to, no cell address as it changes every time.
Public Sub Auto_open() Update_Dates() End Sub
Public Sub Update_Dates() Dim tdy, prev As Date Dim index, i, j, yr, no_inserts As Integer
I have an excel file with many worksheets. I want to get a pop up message providing definitions of different subjects when they are entered from a drop down list in a specific range within a column to improve the users understanding of the subjects.
Worksheet 1 Range (where I want the pop up message to be valid): J85:J385 Subjects from drop down list in specified range: "x,y,z" Pop up message: "Definitions of x,y,z"
Do I have to make a new module, or write the macro in the selected worksheet? What should be the settings of the macro (general, worksheet, declarations etc.)
