Message Box Based On Cell Value In Range
Aug 23, 2013I want a message box to pop up when a "certain" value(example "guest") is enter in a range(ex- a1:a20).
How can i accomplish this with a vba code?
I want a message box to pop up when a "certain" value(example "guest") is enter in a range(ex- a1:a20).
How can i accomplish this with a vba code?
My Cell C3 is a numeric value..I have set conditional formatting to make the text red and bold when the number is equal or less than 10,000 is there a way I can make cell E3 display a message when the C3 condition is true?? or if not a message is there a way to make a message box pop up when my C3 condition of less then or equal to 10,000 is true?
View 6 Replies View RelatedI am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
I have been reading the different post here on the forum.
I have found a snippet of code that will open a pop-up message from a value of a cell. I would llike to do this on one of my reports. Here is the scenario.
Range (R5:S5) 0.15 them MsgBox "Note Must Be Entered For +/- 15% change"
But There are 14 different cells that I want this to work for. The value differs from day to day, and this should pop-up happen without a user having any actions other then the calculated value. But ones the note is entered in the "Notes: cell the message will not return.
Hope I explained it correctly.
The value of the cells in question are calculated in each cell with a formula example "=IF(ISERROR(Z20/H5),0,IF(ISERROR(Z20/H23),0,(Z20/H23)))"
I would like to have Excel automatically send a Console Message whenever a user enters a value greater than zero into a column. In the example attached, I would have received a message on 12/03/2009 and 12/07/2009 because the user entered a positive value into the "Fail" column. I know macros can be written to send E-Mail messages, but I do not want the user to have access to E-Mail or the Internet. Ideally, the message would be sent instantly, at the worst, the next time the user saves the file. *Edit-I really do not care what notification I get. It can be a message, an image on my screen, whatever just as long as I get notification that the user has entered a positive value into the "Fail" column.-End Edit*
View 10 Replies View RelatedI wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.
Using Excel from Office 2007, and WinXP Pro OS
I have a spreadsheet which contains 2 drop down pick lists in Field1 and Field2.
Code:
FIELD1 | FIELD2 | FIELD3
--------------------------------------------
In Cell A2, I have this set in Data > Data Validation:
Allow: List
Source: =CatList
If the user selects a value from the CatList range, then the drop-down options in Field2 are updated accordingly.
In Cell B2, I have this set in Data > Data Validation:
Allow: List
Source: =INDIRECT(A2)
The Ranges are as follows:
Code:
Cat1 | Cat2 | Cat3
---------------------------------------------
Cheese | Hat | Square
Trees | Cat | Circle
Bees | Sat | Triangle
Knees | Mat | Rectangle
Apologies | Bat | Octagon
I'd really like to be able to add a message into FIELD3, which is based on the value in Cat2
e.g. using pseudocode, something like:
If Field2 value = "Apologies" then put this message in Field3: "This requires approval from A"
elseif Field2 value = "Triangle" then put this message in Field3: "This requires approval from XYZ"
elseif Feidl2 value = "Bat" then put this message in Field3: "This does not require approval"
Basically this is for an access form, and I need to be able to add a feedback message to field3 based on what's in Field2.
I thought about using the INDIRECT option to add messages but I can't see how I'd do it. Maybe VB would do it, but I don't know it well enough.
I have an excel file with many worksheets. I want to get a pop up message providing definitions of different subjects when they are entered from a drop down list in a specific range within a column to improve the users understanding of the subjects.
Worksheet 1
Range (where I want the pop up message to be valid): J85:J385
Subjects from drop down list in specified range: "x,y,z"
Pop up message: "Definitions of x,y,z"
Do I have to make a new module, or write the macro in the selected worksheet? What should be the settings of the macro (general, worksheet, declarations etc.)
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies View RelatedI ned a message box to pop up when a cell is out of a specific range.
if value of Cell "D27" is not between 90000 & 939000 or 960000 & 998999 then I need a pop up box to state that they have to be within this range.
Using Excel 2003
In cell E12, I have a drop down list of choices. I am using a code that will display a message box whenever a particular choice is picked from that list.
View 12 Replies View RelatedI need to start at cell "T150" and go down column "T" until the first blank cell and select the text and have a pop up message come up with those results. The first blank cell has a formula in it. I dont want that included. Cell T150 has the value Status in it. Here is what I have but is pulling back all the cells with formulas in it.
HTML Code:
Sub aaaa()
Dim lRow As Long, c As Range
lRow = Cells(Rows.Count, "T").End(xlUp).Row
For Each c In Range("T1:T" & lRow)
If c.Value = "Status" Or c.Value = "Status" Then
Range(c, c.End(xlDown)).Select
[Code] ......
See if you can see what is wrong with this code - I have no idea. All the spreadsheet names are correct and I have used this syntax before, I don't know what I am doing wrong. The macro has a problem with the 3rd line
View 2 Replies View RelatedI am using the following code to display a range of cells from a single column (A1:A10) in a message box, with each cell value on a seperate line.
View 7 Replies View RelatedI've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
I have a range (A5:DG5). Some of these cells are empty, some are populated.
I would like to display a vbYesNo box that shows the value of each populated cell on a different line, with no gaps for non-populated cells.
Can I display the contents of a range of cells in a message box?
View 4 Replies View RelatedI am wondering if it is at all possible (and if so, how) to CREATE your own error message (sorry about spelling mistake in heading =P) in Microsoft Excel.
View 3 Replies View RelatedI have created a sheet that calculates a score. Based on that score a determination is made to do one of three things - Nothing, Peer/Manager Review, Review Required.
In addition it was requested now that I make an overall decision for "Review Required" based on multiple triggers. My thought was to create a table from outputs of each element on another sheet, and then trigger off the table. What I am stuck on is using the multiple choices to trigger the message - Below are the choices of which each or a combination of each should trigger "Review Required"
Calculate Review Required
Total Score 'Review Required
Element 1 "
Element 2 "
Element 3"
Element 4"
Element 5"
Element 6"
Element 7"
Element 8"
Element 9"
Element 10"
Element 11"
Element 12"
Element 13 "
Element 14 '20 or more = reveiw
Element 15 '20 or more = reveiw
Element 16 '20 or more =review
Element 17 'Sum 20 Total of above if less than 20 in each
When the whole row in excelsheet is full for particular date that means all the values of columns (Legal Charge,GA and DNM) have been entered for particular date then display an error message if the another user tries to enter the values for the same date .
It means the user can enter the values for same date only if values of Legal Charge,GA and DNM are empty,otherwise an error message should pop up.
I am trying to fill out my yahoo email's 'Compose email' Form using VBA. I have a workbook with a list of email addresses and text messages to be send. I am primarily using getElementsByTagName(), and able to open a new yahoo page, log in, create a new email, populate the addressfields,and subject field.
However, I am not able to write anything in the message editor ( the part where we write the actual message). The following is a part of the HTML code related to the message editor. Please suggest what I should do?
I have a dropdown list in my spreadsheet, on the list is Compound, Pay by Check, Internal Transfer, and ACH. I would like a message box to pop up with a message when anything except Compound is selected. The cell is d38.
View 9 Replies View RelatedI have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
I currently have the code below, and it checks if there are duplicates of the entered value on all sheets. I would also like to prevent users from entering a value that is not within a certain range. How to add this to my code? I've tried to add another If, but it just ended up looping.
Maybe it would be good to make something like:
1. first check if value is within range (between 1000000 and 3999999). if not within range: msgbox and delete entry.
2. then check for duplicates
Here is the code I have so far:
[Code] ......
How to send a range of cells in a sms text message by using Visual Basic for Applications in Excel?
BTW: I really need this to work for my job! So any feedback would be greatly welcomed. Please read below to understand what I'm trying to do. I need to be able to send my guys their daily goals via sms text message:
The following works great for sending a range of cells in a email message: ....
VBA code. I think I need a worsksheet change event. Here is what I'm looking for:
If cell K1 = 3 and if the value of any cell in column A is < 80000 or is > 86666, or if the five digit number begins with an alpha, then a msg box will pop up stating "Invalid range".
More background:
The user will be manually inputting 5 digit numbers into column A, but if they've selected cell K1 to equal 3 from a dropdown menu (which the user also does), then values entered that are less than 80000 or greater than 86666 are 'out of range', and the user should be alerted and if possible the number they entered gets cleared.
Additionally, some of the numbers the user could type in might begin with an alpha prefix, such as "G1234" - these would also be considered out of range when K1=3, so if the conditional statement could also recognize this it would be useful.
Column A will be blank until the user types in the 5 digit number, so the code only needs to trigger if the number typed into a cell in column A is outside of the aforementioned range.
So to sum it up once again, I'm looking for a msgbox (and clear cell) if the following criteria is simultaneously met-
*If K1 = 3 (meaning that K1 equaling anything other than 3 wouldn't cause the msgbox)
*And values typed in column A are less than 80000 or are greater than 86666, or begin with an alpha (meaning that values typed in between 80000 - 86666 wouldn't cause the msg box.)
I need to create a dynamic range based on cell between a header and footer cell. The header cell ( A8 ) will remain static, however, the footer cell starts at A10 and then will move down as rows are added.
View 9 Replies View RelatedI have a list of products that I want a message to appear prior to printing based on the description choosen.
Product descriptions are choosen in D25:D34 via a drop down.
My wild cards are SWING GATE and DOUBLE SWING GATE, I want to use wild cards because of the many different sizes of each gate.
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Range("B" & Target.Row) = "swing gate" Or Range("B" & Target.Row) = "double swing gate" Then_
MsgBox (Range("F5").Value) & ", Please include chain and locks with order", vbOKOnly, "Chain and Locks"
End If
End Sub