If Value Is Not In Range - Error Message Then Check If Duplicates
Jun 29, 2014
I currently have the code below, and it checks if there are duplicates of the entered value on all sheets. I would also like to prevent users from entering a value that is not within a certain range. How to add this to my code? I've tried to add another If, but it just ended up looping.
Maybe it would be good to make something like:
1. first check if value is within range (between 1000000 and 3999999). if not within range: msgbox and delete entry.
2. then check for duplicates
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
See if you can see what is wrong with this code - I have no idea. All the spreadsheet names are correct and I have used this syntax before, I don't know what I am doing wrong. The macro has a problem with the 3rd line
I am wondering if it is at all possible (and if so, how) to CREATE your own error message (sorry about spelling mistake in heading =P) in Microsoft Excel.
Why am I getting method range of object global failed error message? The error seems to lie in the line highlighted in red.
VB: [CODE]Private Sub btnEditDelete_Click() Dim customerID As String Dim rowID As Integer Dim foundFlag As Integer Dim lastrecFlag As Integer Application.ScreenUpdating = False
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
I have created a userform that inputs employees names in to a sheet called employee list. It works well, now I want to take it a stage further and check to see if the employee being entered is already in the list and if so let the end user decide whether enter the new data or save the data already in the list.
Private Sub cmdOK_Click() ActiveWorkbook.Sheets("Employee List").Activate Range("A1").Select Do If IsEmpty(ActiveCell) = False Then ActiveCell.Offset(1, 0).Select End If Loop Until IsEmpty(ActiveCell) = True ActiveCell.Value = txtName.Value ActiveCell.Offset(0, 1) = txtLast.Value ActiveCell.Offset(0, 2) = TxtNum.Value ActiveCell.Offset(0, 3) = cboCourse.Value If optIntroduction = True Then ActiveCell.Offset(0, 4).Value = "Operative" ElseIf optIntermediate = True Then ActiveCell.Offset(0, 4).Value = "Team Leader" Else ActiveCell.Offset(0, 4).Value = "Manager" End If
I have 3 columns A,B and C and at the end of each column i have the row with total values of A, B and C. So I need to make sure that only one value is posted in one of the 3 column values and also if in the current row if the values are properly entered( that is only one of the 3 values is entered) then insert a blank line just before the Total row. I have this code to insert the new row which is working fine. but i need to validate before i could run the code. that is i need to make sure in the selected row, only one value is entered. Note: I want to validate only for the rows that has the cursor present in it.
I have a distribution list which has names in columns G, H & I (titles in row 2 & 3) data starting row 4. A persons name may appear in any of the 3 columns and may appear only once or many times in the same or multiple columns BUT should not happen in the same row, (rows are cost centres while the columns are types so a person can only get one type per cost centre).
What I need is a formula that will check that there are no duplicate names on a row in columns G:I.
If there were duplicates, is there a formula that would tell me where it is?
The formula could return a result in say G1 which I could format using Conditional Formatting, or would a routine be better for this?
The data could be moved down if more space is needed above the title rows or a separate sheet could be used as a check and query sheet.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
I have a workbook where there are around 10 worksheets. All of them are build the same, but only different sheet name (country name)
What I would like to do is use the column A to check if no one did put a duplicate in a differnt sheet. Now I have a formula in each sheet, but it would be great if it would also look in the rest of the sheets if there is no duplicate.
I have a simple spread sheet, as shown below. Each line is on it's own row, and all the info on each line is in the first cell. (A1,A2,A3 etc....) What I require is a macro that will look at the "Code" line, take note of the code and if it finds a duplicate code number, mark the duplicate code with (1)....say up to (5).
In the case below, it would flag the second 07edr code and change it to 07edr(1). If there was a third 07edr code it would mark it 07edr(2) etc.
It needs to look at all the codes as it's possible there will be more then one set of duplicates.
I need to check if value entered in a textbox in a userform, linked to cell in the worksheet was not entered already in other textboxes in the same userform.
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
I am trying to improve my expense report template and need to check on the load if expense report number has been loaded correctly as well as if this report has been previously loaded. Expense report number format looks like this: AAA-BBBBBB-CC Where:
AAA – Employee ID # BBBBBB – End of the week date
CC – Weekly expense report number For instance, 023-122008-01 means: Employee number 023, week ending date 12/20/2008, weekly expense report number 01. I would like to prevent/give warning of loading incorrect expense report number format, check for possible duplicates, and check if trying to load expense report belongs to the right person (by simply matching previously loaded in different cell of the same sheet employee ID and first three digits of just loaded expense report number. I think I know how to do all of these separate, but have no idea how to combine all three checks for one cell.
Obviously there is the Remove Duplicates option but I want something a bit different plus this option won't be available as the workbook is on complete lockdown.
There will always only be 214 rows to check in column B and the data cannot be sorted or it will mess a lot of things up!
Just wondering if there's some code that can check for duplicate entries because for the workbook to work, each row must have a different entry.
When the user selects this sheet a message box pops up telling them they can't have two or more entries the same but I feel this isn't enough as there's nothing actually stopping them doing this.
I have attached my spreadsheet. Problem no.1:- I want to make all the sheets hidden except Main Index sheet.The concern sheet should gets visible when I select option box or Check box.
problem no. 2 I have given the data of Japan & China Plants. Now the total production of japan Plants are sum of plant 1,2 &3. But production of China plants are variable & need to fix by us. We will put production terget in China Plant 1, 2 & 3 in such a way so that one message box written "please check your data" should be appread whenever the K25/26/27/28/29 dont match with E25/26/27/28/29.
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
I need macro that will check for list of duplicates in sheet1 and place the duplicate data in sheet2. I know how to check duplicates in only one column.But now my sheet having lot of columns.
I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!) {=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works {=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
I get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range) Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then MsgBox "Have Meeting" End If End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to: 1. make sure one of the two are filled, or 2. both are not filled. Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
