Selecting Data Over A Date Range
Sep 12, 2009
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates.
Sheet ‘A’, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P.
Sheet ‘B’ is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days).
What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)
View 8 Replies
ADVERTISEMENT
Jun 20, 2013
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
View 12 Replies
View Related
Feb 9, 2007
On sheet 1 in cell A2 I have a date (2/22/07). On sheet 2 I have 4 columns of data...column A has consecutive dates. I am looking for a code that will select the range that begins with the week beginning date of the date that was inputted on sheet 1 and the week ending date. For example, the code will select the range 2/19/07 to 2/25/07 (A20:D26).
View 6 Replies
View Related
Sep 26, 2007
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
View 9 Replies
View Related
Mar 6, 2013
I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
View 12 Replies
View Related
May 15, 2013
I am using the following code to re-name filtered data in column 4 of my worksheet, but I am running into an issue when the Autofilter returns only one row of data. The End(xlDown) is selecting a range that extends to the last row of the worksheet (1,048,576).
Code:
rfiltered.Cells(1, 3).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Receivables"
Selection.Copy
Range(Selection, Selection.End(xlDown)).Select
ActiveSheet.Paste
How can I write the code so that in the event there is only one row of data, it selects just that row for the paste (and yes it would be redundant to paste over the same value) and then continues on? I would usually use a Cells(Rows.Count, x).End(xlUp).Row to find the last row of data, but I don't think that will work in Autofilter mode.
View 2 Replies
View Related
Feb 27, 2007
i want to write a macro which searches for data in a xl sheet.It should then format that data in a particular format.The data can be present in multiple places.For eg. formating a 5*6 matrix which starts from d4 cell and a 4*7 matrix which starts from e15 cell(please note that d4 and e15 location are not fixed).
View 9 Replies
View Related
Jan 23, 2007
I m trying to make a button to add values to another sheet in my xls. Ive done that... now i try to autofill the percentages from left and above one row....
View 9 Replies
View Related
Feb 11, 2014
I would like to loop through cells row wise.
Columns which have data are A:E
modify below code to select the range from columns A to E?
[Code] ........
View 3 Replies
View Related
Feb 11, 2014
Selecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
View 4 Replies
View Related
Mar 10, 2014
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
View 1 Replies
View Related
Oct 2, 2008
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies
View Related
Apr 28, 2006
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are:
completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls
cashsheetname Formatted Sheet
cashcurrcolumn A
cashfirstrow 2
cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _
Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value
Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _
Range((PELCurrColumn & PELlastrow)).Value
View 8 Replies
View Related
Dec 31, 2009
Hello, I have a question about sorting information using dates but using a range. I need this to sort when I enter a date range into the spreadsheet (the blue blocks on the attached spreadsheet). The factors in colum G need to be sorted by month and input into the yellow highlighted area in column B. There may be an easier way of pulling the data from the "Data" sheet but this was the best I could figure out. Overall, January (or any of the months)needs to have the January (or appropriate) factor that fits within the date range that was input but sorted properly based on the months listed in Column A.
View 6 Replies
View Related
Apr 24, 2014
I have a spreadsheet which contacts three columns of dates, the problem I have is that there are not dates in every column.
What I would like to do is to have a fourth column which shows the latest date from the three previous columns.
View 1 Replies
View Related
Dec 22, 2009
I want to seach and select the newest date in a column. There are green, red and black fonts in the column. I only want to only seach the cells with black fonts.
View 9 Replies
View Related
Mar 18, 2013
I have a spreadsheet which has a list of properties with a list of survey dates. The complication is that every property has multiple surveys and these are all on separate lines with the spreadsheet. The number of surveys could also be different depending on the property in question.
What I would like to do is to compile a report which only shows me when the latest particular type of survey (there are five types of survey, I'll call them 1, 2, 3, 4 and 5).
The survey type is shown in column C, the property is shown in column A and the survey date is shown in column F.
View 4 Replies
View Related
Jul 17, 2014
I have an employee schedule that is a whole year. I'm trying to extract only the next two weeks worth of columns. I'll schedule it to run once a day. Some information... The calender has the dates listed in Row 2 on Sheet called Daily Schedule The 2 week calendar would be on sheet 7 called Two Week Calendar There are only weekdays on sheet 1 Daily Schedule so if there is nothing matching today's date just stop and do nothing I would like it to save the whole file when complete
I have written some of the simplest code but I don't know how to select by today's date then copy that column plus 9 to the right.
Set objExcel = CreateObject("Excel.Application")
objExcel.Visible = True
Set objWorkbook = objExcel.Workbooks.Open("C:Schedule.xlsx")
[Code]....
View 2 Replies
View Related
Jul 11, 2014
So in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE]
ARow = Range("A" & Rows.Count).End(xlUp).Row
Set POBRF = Range("A1:A" & ARow)
BRow = Range("I" & Rows.Count).End(xlUp).Row
Set PO = Range("I1:I" & BRow)
Range("POBRF:PO").Select
[CODE/]
View 1 Replies
View Related
May 28, 2009
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings:
Cells.Find(What:=startdate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
startcell = ActiveCell.Address
Cells.Find(What:=enddate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
endcell = ActiveCell.Address
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
View 9 Replies
View Related
Jan 17, 2007
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation.
Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
View 2 Replies
View Related
Jul 19, 2006
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell.
For example:
Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help?
I came up with something like
ActiveCell.Resize(12, 1).Select
This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.
View 4 Replies
View Related
Apr 4, 2014
I need a formula that allows me to autofill a cell with "X" kind of data after I choose a validated data of Cell A1;
View 6 Replies
View Related
Jul 8, 2014
I have a list of data that displays data by day, I want to select only the data for the for the current month and then the same day time frame for previous months in the data set.
E.g.
Today's date 08/07
Full days into month 7
Formula to sum data in columns B that only looks at dates 01/07-07/7
I will the adjust that formula for a January date that only pulls data for 01/01-01/07
Then repeat for Feb-June
View 3 Replies
View Related
Nov 12, 2008
I have a spreadsheet with Employee details and each employee has a Indicator and a Score.
I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
View 6 Replies
View Related
Feb 8, 2009
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
View 2 Replies
View Related
Jan 31, 2009
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
View 5 Replies
View Related
Apr 4, 2013
I want to copy a range where the row is variable (i in the Loop I'm doing) but the columns stay the same. What am I doing wrong?
Workbooks("Labor Info").Sheets("Transfer").Range("A" & i & ":E" & i).Select
View 1 Replies
View Related
May 13, 2013
I was trying to select all of the pictures/objects in a certain range (A294:L1400) in order to move them all at the same time. How do I do this?
View 1 Replies
View Related
Jun 23, 2008
How would I select a range using variables? For example, say I wanted to say
myRange = Sheets(1).Range("A1:A100"),
but the column was variable. How would I do this if the column number was stored in a variable?
View 9 Replies
View Related
