I have a bunch of open files with dates in cell A3. I want to copy the range starting in A7 (the same range and size in all the open files) and paste it into my vbafile based on matching the date (in row 11). I have a spreadsheet attach with an example of what the code would do for Jan 1.
View 5 RepliesI have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies View RelatedWhat i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
I want to copy a range (I3:I7) from a workbook and tab called "day" into another workbook with a tab called "date". Use the date value in A3 of "day" tab, find the same date in "date" and copy and paste range below.
View 4 Replies View RelatedColumn A is formatted for date. I need to return entire rows to another sheet that match a certain date. is this possible?
View 3 Replies View RelatedI am attempting to select a row if the date field value is within a date range.
I would like to be able to click a button, have a pop-up, be asked to insert a start date and an end date. For example 2014-07-01 and 2014-07-21 I would then like the macro to copy rows if the date value is within that range to the next available row onto a new worksheet.
This code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm‎
I am developing a macro that will copy over the row from one workbook to another based on today's date. I have looked but having some trouble finding a solid way of doing this.
View 2 Replies View RelatedI have a spreadsheet that I enter daily totals into. The sheet is named by date.
I take totals from a number of catagories from the prior day's sheet (ending totals) and enter them on the current sheet (beginning totals), then enter the current day's totals to wind up with new ending totals.
I want to generate a new sheet in the same workbook based on the date of the prior sheet, copy my formatting, and copy the data from the old ending sheet totals to the new sheet beginning totals.
I have data on sheet-1 ("MEAL CHART") that I copy over to sheet-2 (Nutri_DB) daily. The macro below is working for me when I post the data the same day it is recorded. However, I frequently need to post my data the day before or day after it is recorded.
I would like to modify my code below so it copies/pastes the data based on the date in cell B1 (Named range "DATE") not the actual date (today()).
I have the following code that performs a row copy based on selected dates which is then pasted to another sheet as a report. I need to also perform the same copy from another sheet with the same structure so the All_Report contains the data from both sheets. The name of the other sheet to copy the information from is "Closed_Requests".
View 10 Replies View RelatedI want to create a macro assigned to a button that copies values from one cell to another.
I want it to be smart in that way that it should copy the values to predefined cells cells based on the month that has been selected in a drop down field. So if i select for January, it should copy the fixed selection to other target cells then when September was selected.
I have a spreadsheet with a number of sheets.
I need to extract a number of cells, based on the date of another cell and then past these values into a column on anther sheet.
Example: Sheet "Name1" in Column "G" is where I want the values to be pasted.
Sheet "Name2" has the dates in Column "B". I wish to extract the entries in Column "K" into Column "G" on Sheet "Name 1". I also have another Sheet, "Name 3" which has the the date field in column "B" and the entries I wish to extract in Column "K"and pasted in column "G" on the "Name 1"sheet.
The date range I'll be looking to past is by Month and year. The date fomat is dd/mm/yyyy.
I am trying to build a summary report that pulls from two different worksheets within the same workbook. Here's the context of my problem:
Worksheet 2: Column A has a list of dates. The corresponding information for each date is within the row. Sometimes, there are repeated dates with different corresponding information.
Worksheet 3:This is my summary sheet. This report needs to update daily and only pull data related to "today's" date. My question is if i have three rows with the same date but different data, how do i tell my summary sheet to display all three rows for that date. So far, I can only get it to pull the data from the last row with that date.
I am diabetic and track my blood sugar on a spread sheet I created. Each month is a page named for the month and year. ( ie: may07, June07 etc ) The last page is my averages page. I monitor averages from the begining as well as several 'last 3 month' statistics. At this time I have to go in each month and change the months on the '3 month averages' formulas then add a month to the 'over all' formula. I want to use a formula that will simply look at the last 3 months without having to manually change the months as well as the 'overall' formula automatically calculating "all" months without adding a new month every month.
And last but not least, I have some sub-total boxes giving a div by zero error with blank cells. What am I doing wrong? Not all boxes do this even though the code is copied and pasted so they all 'appear' identical. Rather than try to paste my code here you can see my spreadsheet at [url]
I would like to have cell G3 automatically sum the values in Column B based on the start and end date parameters that are typed in the cells (E3 and E4).
View 2 Replies View RelatedI want to save myself some time at work, that's why I want to create an automatic sheet in Excel using VBA. I need to create files with monthly reports of data.
My project looks like this:
1. Gather information from user (Month & Year)
2. Create a file which name is based on Month & Year
3. Select data sheet
4. Find date range to copy (RowBegin, RowEnd)
5. Copy nad Paste required data into new file (point 2.)
6. Delete rows, formated in certain way
7. Find bottom of all columns and insert row with all formulas
8. Format all sheet acording to requirements
I was looking over MrExcel.com and I know how to do all the points besides point -> 4. Find date range to copy (RowBegin, RowEnd)
I got a column "D" with about 5000 cells for now and the sheet is updated daily. In those cells I got dates formatted like this:
D
4012 14/02/2006
4013 21/02/2006
4014 15/03/2006
4015 15/03/2006
4016 17/03/2006
4017 07/04/2006
4018 07/04/2006
4019 20/04/2006
What I don’t know is how get in VBA two variables – range of row numbers describing selected month (for example March) - from (RowBegin) & to (RowEnd), in this case RowBegin=4014 and RowEnd=4016, which I can later put into:
RowSub = RowEnd - RowBegin
Range("A”&RowBegin&”:A”&RowEnd).Copy Sheets("March").Range("A1:A”&RowSub)
I want this filecopy to:
1. create a new folder in a subfolder called "/certificates".
2. name that folder the current date. ie. "/certificates/23.11.11".
3. copy the file into that folder.
4. If it's a duplicate then rename the file " - 2" or what ever the next number is.
Code:
Private Sub CommandButton2_Click()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
[Code].....
I would like to know the function/syntax for determining the due dates given certain date ranges.
See attached sheet for the example : due dates example.xlsx‎
I have 2 columns, one containing a piece of data and one containing dates. I want to count how many times the data is in the first column, based on a specific date range in the 2nd column. I have attached a sample SSF with a better explanation inside it.
View 3 Replies View RelatedI have data in a spreadsheet similar to the below.
[Code] ....
What I need to do is created a named dynamic range based on the current month which will contain all rows/columns within that range. Ideally I need it to create the range for the current month so I can then use this as the data source for a pivot table.
I believe it is something to do with index and match functions?
I am trying to add a gantt chart feature to a project summary worksheet. Ideally I'd like to search Col C (Start date) and Col D (End date) for all projects, and based on the earliest start date (ESD) in C and latest end date (LED) in D, repeatedly insert columns labeled with the value of the ESD (ie Feb 6, 2011), increment by 7 (1 week), insert the next column with ESD+7 and continue on until reaching LED.
View 4 Replies View Related