To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are: completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls cashsheetname Formatted Sheet cashcurrcolumn A cashfirstrow 2 cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _ Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _ Range((PELCurrColumn & PELlastrow)).Value
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation. Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
I used a macro to get the following code, but would like to do this with VBA code where I use variables and numbers instead of the macro's ("I568:J568") notation. Thus I would have something like (lRow, 9) : (lRow, 10) or whatever the correct notation is. Basically I'm trying to copy and paste formulas from one row to the next.
I am trying to sum the range of column B (Being the found match in column A offset 1) to the relevant column set by the variable intcolumn (integer value of the column matching the criteria (in this case column 25)
I have a spreadsheet with Employee details and each employee has a Indicator and a Score. I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
I'm trying to obtain a formula that allows me to select the last 20 numbers in a range of numbers that continue to increase weekly. i.e column a3-a3000 increases by one number every week. I need the formula to sum the lowest 10 numbers of the last 20. If there is 30 numbers from a13-a33 week one. I require the formula to pick up the 10 lowest from the last 20 (a13-a33). Week two the cell increases by on to a34. The formula would then have to pick up the lowest 10 from the last 20 (a14-a44) and so on.
When I use this code is only gets A1:N6...: is there anyway to get it to select the range all the way to the end of the data. I tried CurrentRegion and some other stuff but can't get it to work.: The range may go upto line 500 or 3 I just never know.
I'm trying to write a formatting macro that will insert a gray divider (row) into a blank line. I'm going to do this with a keyboard command, but I'm having a hard time selecting to column AJ. Obviously this command...
...takes you to the end of the page, but I don't need to go that far, just to column AJ.
I'm trying to create a simple checkbook application for a friend. I've gotten pretty much everything I want figured out except for two functions, which are basically the same thing. I'm trying to find the sum of all deposits and of all withdrawals based on two entered dates.
Basically, they enter the dates, and the formula finds the dates, then sums all the deposits/withdrawals between them. I attached the workbook with some sample data in case I wasn't really clear.
I am doing some work in which I need a very flexible tool. I will be doing regression analysis on thousands of funds at a time. I need to define the range for each fund by a count function that counts the number of monthly returns that are posted. The code I have so far is below (I underlined where the references use variables):
I'm trying to use a range(Cells1),(Cells2) all working fine, but now I'm trying to use variables for the Row selection. selection.row as one of the variables, but keep on getting a error.
Code: Sub Clear_Time() Dim Rng As Range Dim pointer As Integer pointer = Worksheets("Summary").Range("Z1").Value Worksheets("SubPanel").Range((Cells(10, pointer)), (Cells(52, pointer))).Find(What:="").Activate
How to decide the two range object variant represent the same range? Plz check the following code, How to decide Rng4 and Rng5 is or not the same range?
Sub IsTheSameRange() With ActiveSheet LastRow = .Cells(65536, "B").End(xlUp).Row Set Rng1 = .Range(.Cells(3, "K"), .Cells(LastRow, "K")) Set Rng2 = .Range(.Cells(3, "AE"), .Cells(LastRow, "AE")) Set Rng3 = .Range(.Cells(3, "BQ"), .Cells(LastRow, "BQ")) Set Rng = Application.Union(Rng1, Rng2, Rng3) Set Rng4 = Rng.SpecialCells(xlCellTypeFormulas, 23) Set WhlRng = .Range("A3:DR" & LastRow) Set Rng5 = WhlRng.SpecialCells(xlCellTypeFormulas, 23) End With End Sub
I'm trying to edit the predefined range in my macro that changes formulas to values. My current macro looks like this:
Dim vCol As Variant vCol = Application.InputBox("Select Column", Type:=2) If vCol = False Or vCol = "" Then Exit Sub Set UserRange = Range(vCol & "9:" & vCol & "35") UserRange.Value = UserRange.Value End Sub
I tried extending the range to include 48:53, but it doesn't work. I tried with this: Set UserRange = Range(vCol & "9:" & vCol & "35" & vCol & "48:" & vCol & "53")
I have a spreadsheet where I need to perform a calculation on the lowest 10 of the 20 most recent entries. Currently I am just deleting the oldest entry and putting in the new data but I now desire to keep all my data.
How do I select the new range of 20 rows and then tell it to take the 10 lowest values to perform the calculation
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates.
Sheet ‘A’, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P. Sheet ‘B’ is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days).
What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)
Question 1) Is there a way that whenever I select Cell B39 that it will copy cells B39:V39 ? From there I can manually paste that selection to where I need to.
If this is possible, it would save the effort of having to select B39:V39 manually and clicking CTRL-C. I am gathering data and the copying and pasting is killing me.
Question 2) Is it possible that when I click on Cell A9 that it can paste any data that I just copied from another worksheet to cells A9:D29? The size of the selection that I would copy is the same size as A9:D29 (4 columns & 29 rows).
I have searched for a solution, but I am not having much luck since I am anaware of the proper terminology for these types of actions.