I want to copy a range where the row is variable (i in the Loop I'm doing) but the columns stay the same. What am I doing wrong?
Workbooks("Labor Info").Sheets("Transfer").Range("A" & i & ":E" & i).Select
I need to select starting with:.
Columns A-O
Rows 1 - ( LR of ColB - Col A is empty )
I require vba code which will allow me to select a range of variable size.
Starting from cell A2 use :
Range(Selection, Selection.End(xlDown)).Select
However then using the line below may not select the entire range as some columns may be empty
Range(Selection, Selection.End(xlToRight)).Select
I am trying to enter code into a Macro that will select a range and then put a subtotal at the bottom of the range.
I have values in col D & E that I am multiplying together in column F. I then want the macro to select a range from F2 to the last Value in col F and then put a total in the next cell down (in col F). The range needs to be variable.
I have a workbook that generates sheets for each year based on selected criteria. It starts at Column H and goes too AH and beyond. When my loop reaches Z it errors out. I think this is happening because the code is referencing the column as ASCII. Here is the
Sub Test()
Dim d As Date
Dim yrint, i, num_years, fields, field_start As Integer
Dim yrstr, crit1, crit2, left_column_range_fixed, right_column_range_fixed, left_column_range_var, right_column_range_var, left_column_range, right_column_range, cost_column, cost_column_var, cost_column_fixed As String
left_column_range_fixed = "H"
right_column_range_fixed = ":AH"
cost_column_fixed = "2"
crit1 = "=x"
crit2 = ">0"
d = Date
yrint = Sheets("Overall"). Range("H2")
field_start = 9 'changed from 9....................
I want to make a range variable ("testrange") that I can use to define a range of non-continuous cells and then use that range variable to select that range of cells in different worksheets within the same workbook.
I tried the below code (simply coloring cells red), but get an error when I try to select "testrange" after moving to the next worksheet.
[Code] .....
The next worksheet is also supposed to have the same range of cells colored red, but I can only get it to work on the first active sheet.
I would like to avoid having to repeatedly rebuild the range I want selected each time I move to a different worksheet.
I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.
View 2 Replies View RelatedI'm trying to make a macro'd button that when clicked will select the cells A1:A?? where ?? is equal to the value in cell B1
B1 is a variable number that changes to be the proper amount of rows that I require selected.
It's always A1 down to A9 minimum and A1 down to A400 max.
Once selected I need the macro to copy the selected cells to the clipboard for another application to be able to paste that info.
So far I've been able to get the copy command to work and the range command to work but can't seem to figure out how to put the variable number from B1 into the range command.
I've made a macro and spend some time making it work across different sizes of data. The last issue I'm having is after the macro sorted out some data, that it will then delete, it has to select the first row and shift select down before deleting it. However, depending on how the data is sorted, the first row could be 9, could be 10 and so on. See below for my code.
Code:
Sub Macro1()
Windows("statistik.xls").Activate
Range("A8").Select
[Code]....
If the first row in my data set is not one of the 3 criteria ("Personligt ejede virksomheder", "Privat", "Reklamebeskyttet"), then the first row # will be 10 instead of 9. If the first two rows are not one of the 3 criteria, then it would be row 11 and so forth. How do I make my macro take this into consideration?
I have below code which I was thinking is very simple to select variable worksheets. However I get Debug error when running:
Code:
Dim rng As Range
Dim cl
Set rng = Sheets("Budgetted sku's").Range("A2:A24")
For Each cl In rng
Sheets(cl.Value).Select
Next cl
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are:
completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls
cashsheetname Formatted Sheet
cashcurrcolumn A
cashfirstrow 2
cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _
Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value
Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _
Range((PELCurrColumn & PELlastrow)).Value
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedSo in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE]
ARow = Range("A" & Rows.Count).End(xlUp).Row
Set POBRF = Range("A1:A" & ARow)
BRow = Range("I" & Rows.Count).End(xlUp).Row
Set PO = Range("I1:I" & BRow)
Range("POBRF:PO").Select
[CODE/]
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings:
Cells.Find(What:=startdate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
startcell = ActiveCell.Address
Cells.Find(What:=enddate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
endcell = ActiveCell.Address
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation.
Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell.
For example:
Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help?
I came up with something like
ActiveCell.Resize(12, 1).Select
This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.
I have a spreadsheet with Employee details and each employee has a Indicator and a Score.
I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
View 2 Replies View RelatedI am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
I was trying to select all of the pictures/objects in a certain range (A294:L1400) in order to move them all at the same time. How do I do this?
View 1 Replies View RelatedHow would I select a range using variables? For example, say I wanted to say
myRange = Sheets(1).Range("A1:A100"),
but the column was variable. How would I do this if the column number was stored in a variable?
I'm trying to obtain a formula that allows me to select the last 20 numbers in a range of numbers that continue to increase weekly. i.e column a3-a3000 increases by one number every week. I need the formula to sum the lowest 10 numbers of the last 20. If there is 30 numbers from a13-a33 week one. I require the formula to pick up the 10 lowest from the last 20 (a13-a33). Week two the cell increases by on to a34. The formula would then have to pick up the lowest 10 from the last 20 (a14-a44) and so on.
View 9 Replies View RelatedI have attached a spreadsheet...I'm trying to select Range A1:N16 using VBA code...
Range(activecell,activecell.end(xltoright)).select
Range(selection,selection.end(xldown)).select
When I use this code is only gets A1:N6...: is there anyway to get it to select the range all the way to the end of the data. I tried CurrentRegion and some other stuff but can't get it to work.: The range may go upto line 500 or 3 I just never know.
I'm trying to select a discontinous range, lets say B2:B30 & D2:D30 and this works fine using the code below:
Range("B2:B30,D2:D30").Select
However if I use the code below, B2:D30 is selected including column C.
Dim LastRow As Integer
LastRow = Range("a65536").End(xlUp).row
Range("B2:B" & LastRow, "D2:D" & LastRow).Select
I'm trying to write a formatting macro that will insert a gray divider (row) into a blank line. I'm going to do this with a keyboard command, but I'm having a hard time selecting to column AJ. Obviously this command...
Range(Selection, Selection.End(xlToRight)).Select
...takes you to the end of the page, but I don't need to go that far, just to column AJ.
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
I have a spreadsheet where I need to perform a calculation on the lowest 10 of the 20 most recent entries. Currently I am just deleting the oldest entry and putting in the new data but I now desire to keep all my data.
How do I select the new range of 20 rows and then tell it to take the 10 lowest values to perform the calculation