I am trying to select dropdown list from webpage dropdown button
Below is the html code I am looking at:
In the above code, i want to get the dropdown value into excel sheet
below is the code i m trying to use but not working.
Set ElementCol = objIE.Document.getElementsByTagName("Select")
ElementCol.getElementsByTagName("option")(1)
I have a worksheet with a Drop Down list (Set up with Data Validation).
All I want to do is a call a procedure when a particular option is selected from the list, without have to run the macro manually.
I've made a drop down list and when I select multiple cells and choose from the drop down list, it only fills one. Here's pictures:
So in that first picture, I've selected multiple cells. But when I drop down the menu and click my selection, this happens:
Why is it that all the cells I've selected does not fill with the option that I chose from the drop down. I highly doubt that I have to manually click all the ones I want to fill with what I choose from the drop down list.
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
I want to be able to select a button called 'GO' on the following website http://www.xe.com/ict/. I have the following code.
On Error GoTo errHandler
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://www.xe.com/ict"
IE.Visible = True
While IE.Busy
DoEvents
Wend
IE.Document.all("Go").Item(0).Click
oSubmit.Click
errHandler
ie.Quit: Set ie = Nothing
I'm attempting to familiarize myself with pulling data from an online database into spreadsheets for manipulation. I'm relatively familiar now with pulling tables using webquery, etc. but my next feat is accessing data from sites which require some "input" before retrieving the desired data set.
Currently, I have a site which contains information and prompts for the "year" of information in a dropdown box. I've attempted to do this as indicated below, and was able to "select" a year, however the page doesn't load the data like it would if I were to manually click on it.
Sub GetEmissionsData()
Dim ieApp As InternetExplorerDim ieDoc As ObjectSet ieApp = New InternetExplorer
ieApp.Visible = True
[Code] ........
Separately I've tried setting the year using another method, but this just give an error
Sub GetEmissionsData()
Dim ieApp As InternetExplorerDim ieDoc As ObjectSet ieApp = New InternetExplorer
ieApp.Visible = True
[Code] .......
I'm not sure if the error is due to some issue with my code - or if "Label1" isn't the correct label for the dropdown / combobox on the site. I didn't post the site source on this page - but the URL indicate in this post is the one I'm interested in.
I have a list of questions that need to be filtered by the user and i was looking for an effective way to do it.
Column A is the question number
Column B is the Question Category
Column C is the actual question.
The user wants to use a dropdown box and select the question category. the results they will get are the question number and the question. there may be several questions within a category so all questions need to be displayed for the category that is selected.
(I havnt explored the use of a list as it gives the user the chance to display all the questions and i am trying to keep the viewing space that this list takes up to an absolute minimum). Also i have mentioned a dropdown box as these are very familiar to the user and so they could use it without the risk of user error. I have attached a list of the questions.
I have set of data in excel which is basically a table of workload and I need to be able to select someones name from a dropdown list and all the other names are removed.
I've attached a screen shot of an example, I want to be able to select any name from a dropdown e.g. Select Trevor and then only cells which contain Trevor are shown (i.e. the other names disappear). BUT all the jobs 1-10 and Stage 1-3 have to stay even if Trevor doesn't work on them.
Screen Shot 2013-10-15 at 16.44.12.png
I'm working with Excel 2002 on Windows XP.
I want to select more than one drop down box at the same time, and copy them as well as rename the cells they refer to.
For example: in A1 there will be a box with LinkedCell set to A1 and ListFillRange set to B1:B5. I now want a similar box in A2, with A2 as LinkedCell. However, when I copy past the box in A1, it still refers to A1 and B1:B5 (the last part is ok). I can easily change A1 to A2 by just changing it in the properties, but the thing is that I also need these boxes in A3:A100. Is there any faster way of changing this?
Also, the ListFillRange might expand in the future. Therefor I would like to know if its possible to select the boxes in A1:A100 and change the ListFillRange to B1:B6 for all at once.
I have a dropdown box to choose a category.
When the category is chosen it displays the relevant course names which corresponds to that category (this could be 1 course up to 10 different courses).
Along with that course name it gives the relevant course overview.
This works exactly how i want it to. (thanks to Zbor from a previous thread)
I now want to expand further and give the corresponding course objectives for each course that shows up in the results.
I have attached a workbook as its much easier to see the dropdown box working.
Sheet 2 is the working sheet and sheet 1 will contain all the source data.
I have highlighted the columns affected in Blue Blue column on sheet 1 will have the course objectives on the same line as the course they belong to Blue column on sheet 2 is where they will be displayed when the correct category selection is made.
The course objectives are unique to the course title and course overview.
In my IE site there is a field which is a dropdown field with the value 'Not Known' and 'Specified Date'. If I select 'Specified Date' another field named 'Date' becomes visible where I can give a date. I was able to ensure that the value 'Specified Date' is selected using the following statement:
IE.document.GetElementById("startDateBasis").Value = "SpecifiedDate"I also was able to populate the date field with the statement:
IE.document.GetElementById("startDate").Value = SOA
Where SOA is populated with the date string I need to be given as input in IE.
My issue though is that, eventhough the data is provided by the macro the field 'Date' is not visible. So I have no way to know if the input was succesful until I submit the screen. I think I read somewhere that this is because of the way datebasis is populated.
How to get the field 'Date' made visible if datebasis is given as 'Specified Date'?
I have 5 cities and each city has a set of data in separate tabs. Right now i have data pulled for all 5 cities in a single sheet but its too cramped up..
I want to use a drop down list (data validation) and if any of the 5 cities are selected in the drop down, the data from that particular city (tab) should be pulled up. This way my sheet size will be reduced 5 time which will look good.
A common v lookup wont work because the data has to be pulled from 5 different tabs for 5 different cities.
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
i want to do is, have a list that picks from a color and then beside it, it will show the possible fruit that is that color for example
Red
apple
cherry
strawberry
OR
Green
watermelon
grapes
The number of fruit will differ by the color so i know i need a counter there, but i am not sure how to list the fruit after i've picked the color
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
Is there a way to create a drop down list from a comma delimited list in a single cell? For example, col A is Name & Col B is the delimited list - Blue,Red,Green (list can be different for each name). Would like a drop down list in col C that allows you to pick one of the values from Col B.
View 3 Replies View RelatedI found code online that I can put on my sheet to get my formatting properties to stay the same for the items in my dropdown list located on another page. However the code does not work for conditional formatted cells...which is what I need. This is the code that I have that will carry over regular formatted cells. Just not Conditional formatted cells.
View 1 Replies View RelatedI'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View Relatedif it is possible to have a selection from a list change the list for another cell?
For example, if I have a drop down list in A1 which is "Apples, bananas, pears", and I select "Apples", is it possible for A2 to have a list of "Green, Red, Yellow", and if I select "Bananas" in A1, for A2 to have a list of "Yellow, Black, Blue"?
I Attached a sheet for what i'm asking about ,, i sent it before but the sheet showing it more clearly
View 10 Replies View Relatedhow to list values from multiple columns in a dropdown list based on lookup value of 1st column as below.
This is how the table looks like.
Product MOLD1 MOLD2 MOLD3
4" AB1 AB2 AB3
6" ZA2 zd4 -
This is how the dropdown list should look like for Product 4"
ab1
ab2
ab3
I have 3 related dropdown lists that work perfectly, if you enter data from left to right. But, if you click in the cell containing the second list, which is based on the first list, of which nothing has been selected, you can just type any value in the cell. Is there a way to prevent this, or at least validate that what is entered is a value in the list.
View 5 Replies View Relatedfill the column "Level 2 Area" based on the value selected from "Level 1 Area" which is coming from a drop down list. So the "Level 2 Area" will be a drop down list also based on the selected value from the drop down list from "Level 1 Area".
Level 1 Area
Level 2 Area
I have a table of adressess and clients with contacts ie
a,b,c,d
client,contact,address,select
in the list there are about 300 entries.
what i want is to put an S in the select column on those clients i am due to visit and then these records to be exported into say a word doc to print off so i have a list of visits i have to do with company contact and addresses
Im trying to organize a tools inventory list. Its supposed to be sort of like an order sheet for each department. But what I want to do is when I select either CARPENTRY, or any of the other trades from a drop-down list, I'll be able to select from another drop-down list items associated with that trade in particular. So eventually I want the master data hidden, preferably in another sheet. I searched all of Google but it seems a bit complicated to get it done. I've attached the sheet so that you can see what I'm talking about. MOVE IN MASTER LIST.xlsx
View 8 Replies View RelatedEasy way to find the drop down list , if more than 500 list. at least the very first letter of the text.
View 1 Replies View RelatedI have a list of Products in my Excel file, I am trying to put them into categories easily. So what I am asking is there a way to select all rows with a certain key word in them so I can easily paste them into my other excel file?
View 1 Replies View RelatedIs it possible to restrict the values of cells in a particular column to entries defined in a list BUT to allow each cell in that column to display multiple items from the list (seperated by a comma for example). I've attached an example of what I would like to do -
In Sheet "2010 Data" I want to be able to select multiple values in column F....(the values are defined within the list named "Platforms" on the worksheet called "Lookups"
