Selection Command Working Variably
Sep 21, 2006
Some very basic
Cells(293, 1).Select
Nothing complicated at all in that. Yet if I put it in the code for a particular Excel sheet, it doesn't always work.
Same with
Range("A293").Select
(Yet wierdly, to confuse matters, very occasionally it does work)
If I put exactly the same code in Procedure 1 in Module 1 and call Procedure 1, I never get an error, and the code executes absolutely fine.
But I have to keep setting up procedures and referencing them for, quite frankly, code which should work no problem.
View 8 Replies
ADVERTISEMENT
Feb 3, 2009
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
View 6 Replies
View Related
Oct 21, 2011
I am having some difficulty working out how to activate the SelectionChange command if the user changes a cell in a particular column. Based on the fact that the column number may change the constant in this column will be that on row 7 the name will be "Fund Size".
Therefore my question is how do I get VBA to run my code if a user changes a cell in the "Fund Size" column...and underneath the "Fund Size" header (i.e. row 8 or greater).
View 2 Replies
View Related
May 1, 2013
I have a command button on my form that unloads it when i am finished. But i have to press it 20 times before it closes. The only line i have in the code is "UnLoad Me"
View 7 Replies
View Related
Nov 17, 2009
I'm very much in a bit of a pickle. I have updated my operating system from vista to windows 7 and a macro no longer works. The old code is
View 4 Replies
View Related
Jul 9, 2008
I have made a list box and can see the data in it and make multiple choices. What I need to know how to do is put a small button and make the list box appear and make the selected choices, then hide the list box but the button visiable. I would to have check boxes and a scroll bar in the list box by the names but i am stumped. If you could show the code that will make this work that will be great!!! lets say cell B3 to B6 shows cat, dog, mouse, bird. I would check the box and choose cat and bird and have only these 2 show up in the cell B2 separated by a comma. So each line for about 100 lines down will need to have the same choices made but with equipment names, people ect. or is there something better that will work. I run Excel 2003 and windows xp.
View 9 Replies
View Related
Jun 13, 2009
I have a command button on worksheet2 of my spreadsheet, which has a macro assigned that will take the user to worksheet1 when it is clicked.
My problem is that when I hide worksheet1 using xlSheetVeryHidden - the maro seems to die and the command button no longer works.
View 9 Replies
View Related
Feb 25, 2014
I have a macro that contains a line:
Range("BB1011:CX1064").Select
The number of columns selected remains the same, but the number of rows changes. The indicator that tells me how many rows to select is contained in cell F1007 and in this example contains "54".
How do I adjust the macro to change the number of rows to select dependent on the value in F1007?
View 6 Replies
View Related
Mar 2, 2009
My question is why the paste special command cannot be accessed after a selection has been cut? (same for Excel 2003 and Excel 2007).
View 3 Replies
View Related
Apr 13, 2009
I would like to know how to configure buttons:
In tab Sheet1 there is Commandbuttons named "Sheet2" & "Sheet3". If i press "Sheet2" then i will be directed to sheet2 tab, same as "Sheet3". In tab Sheet2 & Sheet3 there is commandbutton "Sheet1", if i press the button then i will be directed to default tab which is sheet1.
View 7 Replies
View Related
Oct 26, 2011
I want to filter a list. Within the filter I want to copy a selection of cells and hard copy the formula in those cells (copy paste special values). It is possible to selected the cell and copy them but one cannot paste on a filtered range. The error message I get is "The command cannot be used on multiple selection".
View 2 Replies
View Related
Jan 8, 2008
Is there a way to prompt the user to pick an input composed of the values in a given column. Also, if there are repeats in the column, those need to be ignored.
View 9 Replies
View Related
Feb 12, 2014
I have a fairly straightforward UserForm with 4 listboxes and 4 option textboxes (the textboxes do not need to be a part of the validation I'm needing). I then have a command button that I want to be enabled ONLY if ANY of the 4 Listboxes have a selection. I've tried the "Change" event code below and it works upon the first selection of any listbox item.
However, if the user de-selects all selections in the listboxes (i.e. they are all unchecked), the command button remains enabled. I need the validation logic to enable/disable the button to persist as long as the user has the form open and if there is not a selection in ANY of the listboxes. The reason being is that if they click the command button it will update the cells in the worksheet, which if empty may overwrite previous work completed with blank cells.
View 3 Replies
View Related
Dec 30, 2009
I designed my spreadsheet incorrect.
Everything works good. But when I selecting tables with listbox, I forgot to notice that there also comboboxes.
I mean, rwgrietveld, I use selecting table to hide 'em, but when I hide 'em comboxes should also disappear (become invisible).
is it possible at all to make invisible activex commandbutton in selection?
View 11 Replies
View Related
Mar 6, 2014
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies
View Related
Jun 11, 2008
After Format > Column > Autofit Selection, the cell width is STILL not sufficient. Values with many digits do not show up in the print out (only ######s appear). What should I do?
View 9 Replies
View Related
May 25, 2006
I try the following selection
Columns("B:AF").Select
Selection.ColumnWidth = 2.3
It is selecting columns a to af. Why would take column a if it is not part of select?
Sub Add_worksheet_month()
Dim Lst() As String
Dim I As Integer
Dim wname As Date
'Dim wmonth As Date
View 4 Replies
View Related
Jul 31, 2014
I've recently created a macro which takes a .csv file and scrubs the data and dresses it up for a report. I've finally got it running without any problems and have added it individually to 5 different user accounts on my network as an add-in, but need a way to share it across a computer network without allowing others to edit the file.
The report is generated multiple times a day by the different users, none of whom are very computer literate (not that I am much better, myself), and the macro over-writes the old file each time. I've read that it's possible to simply create a shortcut to the file that automatically opens the spreadsheet in read-only format, which would be perfect for what I'm trying to do, but I haven't been able to get it to work so far.
My current shortcut pathway is similar to this:
"C:Program FilesMicrosoft OfficeOffice15EXCEL.EXE" /R "C:UsersBenDocumentsOT Master.xlsx"
On my computer at work (Windows 7) the shortcut simply opens the spreadsheet so that anyone can edit it, instead of as a read-only file. On my computer at home (I'm trying to experiment) (windows 8.1) it won't even let me save the shortcut, saying I need to provide administrator permission & then cutting to a window that says "access denied".
I won't have the pathway for the actual file I'm trying to create a shortcut for until tomorrow when I get back to work, but I've formatted it essentially the same, directing to the excel.exe file, running the switch "/R", and then directing it to the actual file location.
The ultimate goal is to have multiple people be able to view the file without locking out those who need to update it.
View 1 Replies
View Related
Sep 7, 2010
I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
View 4 Replies
View Related
Jun 16, 2006
Why this code doesn´t enter in the if condition when i don't select any item from the listbox
semana = ListBox1.Value
If semana = Null Then
MsgBox ("Need to choose one item!!!")
Else
emd = Range("A48").Value
End If
View 3 Replies
View Related
Jul 14, 2006
This one has really got me stumped:
Sub NCR()
Application.DisplayAlerts = False
Workbooks.Open ("J:AcctMgt3NWFMScriptingScriptsDailyReportsNCRNCRvdn.xls")
Sheets("NCRvdn").Columns("B:B").EntireColumn.AutoFit
dRow = Sheets("NCRvdn"). Range("B1").Text
dMonthDay = Format(dRow, "mmdd")
dDay = Format(dRow, "dd")
dPrevDay = dDay - 1
dMonthName = Format(dRow, "mmmm")
dMonthNum = Format(dRow, "mm")
dYear = Format(dRow, "yy")
dPrevDay2 = dMonthNum & dPrevDay.............
This opens the first file and dRow="7/13/2006". The next file that it opens contains links to information from the previous days. Without VBA you just drag the previous day down, select the row of data and do a replace all, say from 0712 to 0713. As you can see I even tried to make it use the specific data I wanted versus the variables; still doesn't work. What really gets me is that if I go back to the sheet after this code runs, I go to EditReplace, replace all "0712" to "0713" and it does it. It has to be the code then right??
View 3 Replies
View Related
Apr 11, 2007
This vba code is supposed to move the cursor to the Cacluate1 command button when the user clicked on cell H6.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$H$6" Then Calculate1.Activate
End Sub
The only changes that I have made is a change to a private sub worksheet_change(ByVal TArget as Range). Would these changes have anything to do with this no longer working?
View 9 Replies
View Related
Apr 14, 2009
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies
View Related
Apr 19, 2014
I am playing around with the Forfiles command (being called from Excel via Shell)..
I can't for the life of me get it apply a second command (such as getting the file size of each file)..
For example:
VB:
Private Sub CommandButton1_Click()
Dim Z
Z = Split(CreateObject("wscript.shell").exec("cmd /c forfiles /P C:UsersapoDesktopTextFiles /S /M *.* /d
[Code]....
The end result being the filename and the filesize shown..
View 4 Replies
View Related
Jun 20, 2013
Excel 2007
I have this simple formula: =IF(SEARCH("ABC",BQ239,1)>0,"Found", "Not Found")
Instead of saying Not Found when the value is not in the cell BQ239 text string I get #VALUE! returned
how do I get it to say "Not Found"? I searching for a substring that can be anywhere in the string.
View 2 Replies
View Related
Jun 3, 2013
If a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
View 1 Replies
View Related
Oct 3, 2006
I tried very hard to design a leave roster for user to mark their leave application. The criteria are as follows:
1. 4 applications per date
2. a region of worksheet (i.e. "A2 to H20) will be defined for users to "click" on the cells (within the defined region) to mark their application.
3. once a cell is clicked (i.e. marked), it cannot be altered.
4. each click will automatically increase the total by 1.
I got the following code to deal with the situation but user can still click on any cell outside the region (in fact I fail to define the region).
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim m
ad = Mid(ActiveCell.Address, 2, 1)
m = Range(ad & 24).Value 'here a formula "CountA(A2,A20)" will be place in the cell (24, c).......................
View 2 Replies
View Related
Jan 30, 2007
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
View 9 Replies
View Related
Jan 25, 2010
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
View 9 Replies
View Related
Apr 4, 2013
I am working on a project where user has to select an item from a listbox, however there is a condition that if user select an item, other items of listbox should be disabled so that he/she can not select any other item.
Is there any way to do that as I tried
VB : Listbox.enabled = False
and
VB : Listbox.locket = True
in Listbox - Click/Change but no desirable results got.
View 1 Replies
View Related
