I want to filter a list. Within the filter I want to copy a selection of cells and hard copy the formula in those cells (copy paste special values). It is possible to selected the cell and copy them but one cannot paste on a filtered range. The error message I get is "The command cannot be used on multiple selection".
View 2 RepliesI have to filter a data based upon the selection list value.
Ex:
Assume that i have 4 values listed in my SELECTION LIST
INDIA
US
UK
AUS
If i select "US" in selection list ...Filter has to take this dynamically and filter the data..
I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
There are multiple training sessions that will be rolling out in Q1 13 and my manager needs a way to track which empolyees have been to which training sessions. Easy enough. He wants something extremely clean looking, but obviously efficient. What he described to me (his vision) is to have the training sessions listed into columns with drop down under each that contain every employee's name. So when a training session is held, he can easily click the drop down beneath the session title and select multiple persons that were in attendance. Right now I just have all the employees listed in column A and all the training sessions listed across the top and anticipated just putting a "x" in the box for the session that each person attends. This will accomplish exactly what he's looking for, but if what he's describing is remotely possible I would like to do that.
View 2 Replies View Relatedbelow is an excel file with a UserForm.
The goal here is to select the worksheets in one list box and transfer it to another. Multiple Selection is allowed. I am having 2 question i am struggling with.
Question 1 -
When passing the sheet names from List Box 1 to List Box 2 (using Add button) i would like the selected items of List Box 1 to be deleted after transfer. I thought i could access this using the command below but it does not work properly -> error message.
UF_PI_LINK_1.LB_SheetList.RemoveItem UF_PI_LINK_1.LB_SheetList.List(i)
Question 2 -
When the user is done the ListBox 2 need to be stored. When I save then close my workbook and then reopen it, i would like to be able to access the selection that the user has made before closing the worksheet. How can I store the content of ListBox 2 to achieve such a result. I guess i could use a use a hidden Worksheet where i could store the selection into some cells but i would like to know if there is a pure VB solution.
I have created a Data Validation list in one of my spreadsheets which works fine. The list itself has no duplicates which is fine but when I select my entries in the other spreadsheet, I want to make sure they cannot select the same value twice.
I tried selecting "List" in data validation and using an AND with COUNTIF but it doesn't work.
=AND(Employees, countif($A$1:$A$20,A1)=1)
I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
I am having some difficulty working out how to activate the SelectionChange command if the user changes a cell in a particular column. Based on the fact that the column number may change the constant in this column will be that on row 7 the name will be "Fund Size".
Therefore my question is how do I get VBA to run my code if a user changes a cell in the "Fund Size" column...and underneath the "Fund Size" header (i.e. row 8 or greater).
Some very basic
Cells(293, 1).Select
Nothing complicated at all in that. Yet if I put it in the code for a particular Excel sheet, it doesn't always work.
Same with
Range("A293").Select
(Yet wierdly, to confuse matters, very occasionally it does work)
If I put exactly the same code in Procedure 1 in Module 1 and call Procedure 1, I never get an error, and the code executes absolutely fine.
But I have to keep setting up procedures and referencing them for, quite frankly, code which should work no problem.
My question is why the paste special command cannot be accessed after a selection has been cut? (same for Excel 2003 and Excel 2007).
View 3 Replies View RelatedI would like to know how to configure buttons:
In tab Sheet1 there is Commandbuttons named "Sheet2" & "Sheet3". If i press "Sheet2" then i will be directed to sheet2 tab, same as "Sheet3". In tab Sheet2 & Sheet3 there is commandbutton "Sheet1", if i press the button then i will be directed to default tab which is sheet1.
I have a fairly straightforward UserForm with 4 listboxes and 4 option textboxes (the textboxes do not need to be a part of the validation I'm needing). I then have a command button that I want to be enabled ONLY if ANY of the 4 Listboxes have a selection. I've tried the "Change" event code below and it works upon the first selection of any listbox item.
However, if the user de-selects all selections in the listboxes (i.e. they are all unchecked), the command button remains enabled. I need the validation logic to enable/disable the button to persist as long as the user has the form open and if there is not a selection in ANY of the listboxes. The reason being is that if they click the command button it will update the cells in the worksheet, which if empty may overwrite previous work completed with blank cells.
I designed my spreadsheet incorrect.
Everything works good. But when I selecting tables with listbox, I forgot to notice that there also comboboxes.
I mean, rwgrietveld, I use selecting table to hide 'em, but when I hide 'em comboxes should also disappear (become invisible).
is it possible at all to make invisible activex commandbutton in selection?
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedHow can I perform a custom autofilter operation on the Column A data shown below that will filter out any cell that does not follow a "#.#.#" format. In other words I only want to see Level 3 paragraph numbers that contain two periods and suppress out all the other levels (variations containing 3 or more periods). I tried the following syntax in the custom aotofilter field with no success - "^#.^#.^#"
3.2.1
3.2.1.1
3.2.1.1.1
3.2.1.2
3.2.1.2.1
3.2.1.2.2
Using Excel 2003.
I have a spreadsheet that summarizes all of our assets in cell C1947: subtotal(3,D2:D1944)
In column G, I have a "Y" or "N" or BLANKS "". I'm trying to come up with a formula that would give me the correct totals for the Y's or N's or blanks when I select one of the AutoFilter columns. For example:
I currently have 1,943 assets. Column G has the Y's N's and blanks. This is showing all the assets. If I select column F which is a specific location, I would like to see the correct count of Y's N's and blanks while the subtotal command shows the total assets.
I have a large Excel with details of 1,000 staff
Column J1 is called: Resource Name which has 1,000+ staff other columns have corresponding Hours, Project names etc
I want an advanced filter where I select COLUMN J:J and filter this whole sheet based on say 25 names (in the format they're in) e.g
Frank, James
Wilkonson, Paul,
etc
In the Advanced Filter, Ive selected J:J as LIST RANGE, but how do I input an OR statement in the Criteria, as above i.e where name is Frank, James OR Wilksonson, Paul OR
Alternatively, I have the list of the 25 names in Sheet 2, can the Advanced Filter do a VLOOKUP then filter entire Sheet based on the names provided?
How do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
I am trying to find the sum value of a range, specified by two variables.
ie. what is the total spend in 2007 for Hong Kong?
I think I have (with the help of Andy Pope) resolved how to distinguish the correct figures which I wish to summate using with the following
Is there a way to filter a listbox from the selection in a combobox?
View 2 Replies View RelatedI've recorded a macro which selects "1" in a filter drop-down box then prints some pages, then comes back and selects "2" in the filter then prints some pages, etc etc etc.
I've looked at the code for this and it treats the "1", and the "2" etc as text each time - originally I had the filter on names, but the names change each time I need to do this whilst the process doesn't, so I filtered on numbers instead.
However, I would have to enter the repeated blocks of code down to 1000 to get it to select down to "1000" in the filter. About 3/4 lines each time but with me manually typing in 1, 2, 3, 4 .... 999, 1000.
Is there a way to say in VBA 'repeat filter selection until you've run out of numbers then come back to "All" and stop ?
I am looking for a formula that calculates the weighted average list price. In the attached file you'll find a formula which i've got through Ozgrid. The formula in cell I1 is: sumproduct((i4:i69)*(j4:j69))/sumproduct((j4:j69)*(i4:i69<>"")
That formula is perfect untill i filter data. For example:
The weighted value for the entire datasheet is 25.83%. After i made a filter selection on France the weighted value is still the same. How can i modify this formula so that it only calculates the weighted average for the selected records?
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
I have a Pivot with a Userform containing 3 cascading Listboxes, each listbox fills down to the next. What i am trying to do is have the result of the listboxes to filter the Pivot table. Keeping it simple for a moment, in listbox1 user has a list of Departments and clicks "Liquor" then the Pivot should only show items within the "Liquor" departments. How do i achieve this? Also when looking at other treads and seeing the code offered, should i be trying to filter the Pivot Table field in the Page or Row area?
View 6 Replies View RelatedI want to create multiple pivot tables each performing its own tasks. When i want to filter a particular category in all first pivot tables i have to do this one by one.
This is time consuming and i think it can be done faster. Is it possible when i filter a category in pivot table 1 that this filter is automatically filtered in the other pivot tables?
I filtered my database in such a way that i end up with a list in which different companies are shown.
For example:
Companies (column A)
MER
MER
TYH
INT
MER
TYH
TYH
Now i want excel to count for me the number of different companies active (so in this example it would be 3, that is MER + TYH + INT). Does anyone know how to make this formula?
How to filter one of the Pivot Table Combobox, according to selection of another Pivot Table Combobox?
View 7 Replies View RelatedI am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...